Power Government Departments Closing in 2 days TDR #57091515

Tender for Tender for Increasing Capacity Of 33/11 Kv S/S Rasara, Karsar And Maldah Dist- Ballia

Issued by Government Departments · Ballia, Uttar Pradesh
Tender Value
52.57 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
2 days left
EMD
53000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Ballia → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Increasing Capacity Of 33/11 Kv S/S Rasara, Karsar And Maldah Dist- Ballia

BOQ

Name of Work:- fctusl Iyku OkkZ 2026&27 ds vUrxZr lseh&VuZdh vk/kkj ij ¼1½ fo|qr forj.k [k.M&jlM+k] cfy;k ds dk;Z {ks= esa 33@11 ds0oh0 fo|qr midsUnz&jlM+k ij LFkkfir ikWoj ifjorZd (10+10 MVA to 10+10+5 MVA) {kerko`f) dk dk;Z ¼2½ fo|qr forj.k [k.M&ck¡lMhg] cfy;k ds dk;Z {ks= esa 33@11 ds0oh0 fo|qr midsUnz&djlj ij LFkkfir ikWoj ifjorZd (1x5 MVA to 2x5 MVA) {kerko`f) dk dk;ZZ ¼3½ fo|qr forj.k [k.M&ck¡lMhg] cfy;k ds dk;Z {ks= esa 33@11 ds0oh0 fo|qr midsUnz&ekyng ij LFkkfir ikWoj ifjorZd (1x10 MVA to 10+5 MVA) {kerko`f) djkus dk dk;ZA ¼leLr lkexzh dh ynkbZ]
Sl. No. Item Description
1Increasing capacity (10+10 MVA TO 10+10+5 MVA) of 33/11 K.V. Sub – Station Rasra EDD-1, Distt. - Ballia.Decentralized Material (Provided by Contractor)
211 KV cable jointing kit 3×300 mm² outdoor.
311 KV cable jointing kit 3×300 mm² indoor.
411 KV cable jointing kit 3×185 mm² outdoor.
511 KV cable jointing kit 3×185 mm² Indoor.
6Top channel 100x50x6 mm, 2400 mm long.
7Holding clamp.
8Complete stay set.
9Disc fitting for T&C 45 KN.
10Disc insulator T&C 45 KN.
11Polymeric 11KV pin insulator.
12PG clamp.
13Number plate with clamp and nut & bolt.
14Danger plate with clamp and nut & bolt.
15MS dropper angle.
16M S Earthing Rod 20 x 2500 mm.
17Barbered wire.
1811 KV E-bracket.
19Armoured copper control cable 2×2.5 mm².
20Armoured copper control cable 4×2.5 mm².
2124 volts battery and battery charger with cabinet.
22GI pipe 6\\" dia over the 3x300/185 mm² XLPE cable.
23Holding clamp for 11 KV cable.
24Holding clamp For GI pipe / cable(3x185 mm²) & dropper channel .
25M.S. nut & bolt various size with washer.
26Structure for cable support
27\\"L\\" type structure for neutral.
28P.G clamp for dog to dog.
29Rubber mat.
30ERECTION OF WORK(Shifting & loading of following materials on private vehicle at store centre Ballia & carriage up to 33/11 KV Sub-Station Rasra, Distt- Ballia (distance 35 km approx) & Un-loading of the same with proper stacking at S/S site.)
31PCC pole 8.5 mtr. long.
3233KV Single T/F control panel .
3333 KV VCB 800A, 750 MVA with steel structure.
3433 KV C.T 200-100/1A.
35Structure of 33 KV CT.
3633 KV LA.
37Structure of 33 KV LA.
3833 KV fuse set.
39Structure of 33KV fuse set.
4033 KV bus isolator.
41Structure of 33 KV bus isolator.
4233 KV post Insulator.
43Structure of 33 KV post insulator.
4490 Ibs, rail pieces (44.64 Kg/mtr.).
45ACSR dog conductor
4611 KV XLPE cable 3×300 mm².
4711 KV XLPE cable 3×185 mm².
4811 KV VCB 600-300/5A , 350 MVA I/C.
4911 KV VCB (out going) 200-100/5A, 350 MVA.
5011 KV bus coupler.
51Fresh T/F oil.
52Earthing of S/S outdoor equipments (earthmat).
53Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.
54Body earthing (bore type) of 5 MVA power transformer body earthing at including cost of G.I. strip,G.I. pipe 1.5\\" dia 40' long and other earthing required all material.
55Earthing of equipments like control panel (1No.), 11KV VCB I/C (1No.), LA (1No.) including cost of G.I. strip,G.I. pipe 1.5\\" dia 40' long and other earthing materials required.(delta type earthing).
56Filling of transformer oil installed 5 MVA power transformer.
57Providing & jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm² indoor/outdoor type.
58Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.\\" dia 30' long and other earthing materials (delta type earthing).
59G.I. stand for neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle, channel support and grouting.
60Providing , erection and grouting of required channel/angle for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F bushings.
61Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
62Laying of 11 KV “XLPE” power cable 3 x 300 mm² / 185 mm² including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
63Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long complete work.
64GI Pipe earthing complete for cable jointing kit with materials.
65Erection of double pole on 8.5 Mtr PCC pole long and mounting of all accessories etc complete.
66Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
67Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
68Electrical connection of 11 KV switchgear panel and fitting of bus bar and P.T.
69Testing of 11 KV switchgear panel in all respect.
70Providing of 03 phase generator on rent basis for testing of power transformer and related other equipment.etc..
71Laying of various typt of control cables.
72Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate.
73Erection, grouting and mounting of “VCB” structure, fitting of “VCB” on erected structure with complete earthing.
74Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.
75Erection grouting and earthing of 33 KV bus isolator structure.
76Erection grouting and earthing of 33 KV fuse set structure.
77Erection grouting and earthing of 33 KV post insulator structure.
78Erection grouting and earthing of 33 KV L.A. structure.
79Mounting and fitting of 33 KV bus isolator 400 Amp.
80Mounting and fitting of 33 KV post insulator.
81Mounting and fitting of 33 KV LA.
82Mounting and fitting of 33 KV fuse set ( copper strip as required size for 33 KV fuse set).
83Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI earthing strip.
84Sepret earthing of sub-Station indoor equipment complete including cost of all materials.
85Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( providing alluminium lug and PG clamp).
86Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.
87Dismantling of existing pale fencing and after exentention, resetting after completion of transformer work and land filing work.
88Painting of newly erected structure in switchyard (Applying one coat of good quality red oxide & two coat of aluminium paint).
89Increasing capacity (1x5 MVA TO 2x5 MVA) of 33/11 K.V. S/s Karsar, EDD- III Bansdih, Distt. - Ballia.Decentralized Material (Provided by Contractor)
9011 KV cable jointing kit 3×300 mm² outdoor.
9111 KV cable jointing kit 3×300 mm² indoor.
9211 KV cable jointing kit 3×185 mm² outdoor.
9311 KV cable jointing kit 3×185 mm² Indoor.
94Top channel 100mm x 50mm x 6mm, 2400 mm long.
95Holding clamp.
96Complete stay set.
97Disc fitting for T&C 45 KN.
98Disc fnsulator T&C 45 KN.
99Polymeric 11KV pin insulator.
100PG clamp.
101Number plate with clamp and nut & bolt.
102Danger plate with clamp and nut & bolt.
103MS dropper angle.
104M S earthing rod 20 x 2500 mm.
105Barbered wire.
10611 KV E bracket.
107Armoured copper control cable 2×2.5 mm².
108Armoured copper control cable 4×2.5 mm².
10924 volts battery and battery charger with cabinet.
110GI pipe 6\\" dia over the 3x300/185 mm² XLPE cable.
111Holding clamp for 11 KV cable.
112Holding clamp for GI pipe / cable (3x185 mm²) & dropper channel.
113M.S. nut & bolt various size with washer.
114Structure for cable support.
115\\"L\\" type structure for neutral.
116P.G clamp for Dog.
117Rubber mat.
118ERECTION OF WORK(Shifting & loading of following materials on private vehicle at store centre Ballia & carriage up to 33/11 KV Sub-Station Karsar, Distt- Ballia (Distance 40 km approx) & Un-loading of the same with proper stacking at S/S site.)
119PCC pole 8.5 mtr long.
12033KV single T/F control panel.
12133 KV VCB 800A, 750 MVA with steel structure.
12233 KV C.T 200/100/1A.
123Structure of 33 KV CT.
12433 KV LA.
125Structure of 33 KV LA.
12633 KV fuse set.
127Structure of 33KV fuse set.
12833 KV bus isolator.
129Structure of 33 KV bus isolator.
13033 KV post insulator.
131Structure of 33 KV post insulator.
13290 Ibs, rail pieces (44.64 Kg/mtr.).
133ACSR Dog conductor.
13411 KV XLPE cable 3×300 mm².
13511 KV XLPE cable 3×185 mm².
13611 KV VCB 600-300/5A , 350 MVA I/C.
13711 KV VCB (Out going) 200-100/5A, 350 MVA.
13811 KV Bus coupler.
139Fresh T/F oil.
140Earthing of S/s outdoor equipments (earthmat).
141Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.
142Body earthing (bore type) of 5 MVA power transformer body earthing at including cost of G.I. strip, G.I. pipe 1.5\\" dia 40' long and other earthing materials required .
143Earthing of equipments like control panel (1 no.), 11KV VCB I/C (1 no.), LA(1 no.) including cost of G.I. strip, G.I. pipe 1.5\\" dia 40' long and other earthing materials required.(delta type earthing).
144Filling of transformer oil In installed 5 MVA power transformer.
145Providing & jointing charges of 11 KV \\"XLPE\\" C/J kit 3 x 300/185 mm2 indoor/outdoor type.
146Neutral earthing (delta type) of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5\\" dia 30' long and other earthing materials.
147G.I. stand for neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.
148Providing , erection and grouting of required channel/angle for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F bushings.
149Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
150Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
151Laying of 11KV ‘XLPE’ cable in air after providing 6\\" dia. M.S pipe 3 mtr long complete work.
152GI pipe earthing complete for cable jointing Kit with materials.
153Erection of double pole on 8.5 Mtr PCC pole long and mounting of all accessories etc complete work.
154Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
155Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
156Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
157Testing of 11 KV switchgear panel in all respect.
158Providing of 03 phase generator on rent basis for testing of power transformer and related other equipment etc.
159Laying of various type of control cables.
160Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate.
161Erection, grouting and mounting of “VCB” structure, fitting of “VCB” on erected structure with complete earthing.
162Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.
163Erection grouting and earthing of 33 KV Bus isolator structure.
164Erection grouting and earthing of 33 KV fuse set structure.
165Erection grouting and earthing of 33 KV post insulator structure.
166Erection grouting and earthing of 33 KV L.A. structure.
167Mounting and fitting of 33 KV bus isolator 400 amp.
168Mounting and fitting of 33 KV post insulator.
169Mounting and fitting of 33 KV LA.
170Mounting and fitting of 33 KV fuse set ( copper strip as required size for 33 KV fuse set).
171Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI earthing strip.
172Separate earthing of sub-Station indoor equipment complete including cost of all materials.
173Jumpring form 33 KV bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc. ( providing alluminium lug and PG clamp).
174Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.
175Dismantling of existing pale fencing and after exentention, resetting after completion of transformer work and land filing work.
176Painting of newly erected structure in switchyard (Applying one coat of good quality red oxide & two coat of aluminium paint).
177Increasing capacity (1x10 MVA TO 10+5 MVA) of 33/11 K.V. S/s Maldah, EDD-III Ballia, Distt. - Ballia. Decentralized Material (Provided by Contractor)
17811 KV cable jointing kit 3×300 mm² outdoor.
17911 KV cable jointing kit 3×300 mm² indoor.
18011 KV cable jointing kit 3×185 mm² outdoor.
18111 KV cable jointing kit 3×185 mm² Indoor.
182Top channel 100mm x 50mm x 6mm, 2400 mm long.
183Holding clamp.
184Complete stay set.
185Disc fitting for T&C 45 KN.
186Disc fnsulator T&C 45 KN.
187Polymeric 11KV pin insulator.
188PG clamp.
189Number plate with clamp and nut & bolt.
190Danger plate with clamp and nut & bolt.
191MS dropper angle.
192M S earthing rod 20 x 2500 mm.
193Barbered wire.
19411 KV E bracket.
195Armoured copper control cable 2×2.5 mm².
196Armoured copper control cable 4×2.5 mm².
19724 volts battery and battery charger with cabinet.
198GI pipe 6\\" dia over the 3x300/185 mm² XLPE cable.
199Holding clamp for 11 KV cable.
200Holding clamp for GI pipe / cable (3x185 mm²) & dropper channel.
201M.S. nut & bolt various size with washer.
202Structure for cable support.
203\\"L\\" type structure for neutral.
204P.G clamp for Dog.
205Rubber mat.
206ERECTION OF WORK(Shifting & loading of following materials on private vehicle at store centre Ballia & carriage up to 33/11 KV Sub-Station Maldah, Distt- Ballia (Distance 45 km approx) & Un-loading of the same with proper stacking at S/S site.)
207PCC pole 8.5 mtr long.
20833KV single T/F control panel.
20933 KV VCB 800A, 750 MVA with steel structure.
21033 KV C.T 200/100/1A.
211Structure of 33 KV CT.
21233 KV LA.
213Structure of 33 KV LA.
21433 KV fuse set.
215Structure of 33KV fuse set.
21633 KV bus isolator.
217Structure of 33 KV bus isolator.
21833 KV post insulator.
219Structure of 33 KV post insulator.
22090 Ibs, rail pieces (44.64 Kg/mtr.).
221ACSR Dog conductor.
22211 KV XLPE cable 3×300 mm².
22311 KV XLPE cable 3×185 mm².
22411 KV VCB 600-300/5A , 350 MVA I/C.
22511 KV VCB (Out going) 200-100/5A, 350 MVA.
22611 KV Bus coupler.
227Fresh T/F oil.
228Earthing of S/s outdoor equipments (earthmat).
229Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.
230Body earthing (bore type) of 5 MVA power transformer body earthing at including cost of G.I. strip, G.I. pipe 1.5\\" dia 40' long and other earthing materials required .
231Earthing of equipments like control panel (1 no.), 11KV VCB I/C (1 no.), LA(1 no.) including cost of G.I. strip, G.I. pipe 1.5\\" dia 40' long and other earthing materials required.(delta type earthing).
232Filling of transformer oil In installed 5 MVA power transformer.
233Providing & jointing charges of 11 KV \\"XLPE\\" C/J kit 3 x 300/185 mm2 indoor/outdoor type.
234Neutral earthing (delta type) of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5\\" dia 30' long and other earthing materials.
235G.I. stand for neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.
236Providing , erection and grouting of required channel/angle for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F bushings.
237Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
238Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
239Laying of 11KV ‘XLPE’ cable in air after providing 6\\" dia. M.S pipe 3 mtr long complete work.
240GI pipe earthing complete for cable jointing Kit with materials.
241Erection of double pole on 8.5 Mtr PCC pole long and mounting of all accessories etc complete work.
242Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
243Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
244Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
245Testing of 11 KV switchgear panel in all respect.
246Providing of 03 phase generator on rent basis for testing of power transformer and related other equipment etc.
247Laying of various type of control cables.
248Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate.
249Erection, grouting and mounting of “VCB” structure, fitting of “VCB” on erected structure with complete earthing.
250Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.
251Erection grouting and earthing of 33 KV Bus isolator structure.
252Erection grouting and earthing of 33 KV fuse set structure.
253Erection grouting and earthing of 33 KV post insulator structure.
254Erection grouting and earthing of 33 KV L.A. structure.
255Mounting and fitting of 33 KV bus isolator 400 amp.
256Mounting and fitting of 33 KV post insulator.
257Mounting and fitting of 33 KV LA.
258Mounting and fitting of 33 KV fuse set ( copper strip as required size for 33 KV fuse set).
259Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI earthing strip.
260Separate earthing of sub-Station indoor equipment complete including cost of all materials.
261Jumpring form 33 KV bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc. ( providing alluminium lug and PG clamp).
262Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.
263Dismantling of existing pale fencing and after exentention, resetting after completion of transformer work and land filing work.
264Painting of newly erected structure in switchyard (Applying one coat of good quality red oxide & two coat of aluminium paint). Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57091515
AUTHORITY Government Departments
TENDER VALUE 52.57 Lakhs
LAST DATE 27-08-2026
Authority
Authority Name Purvanchal Vidyut Vitaran Nigam Limited
Work Description Tender for Increasing Capacity Of 33/11 Kv S/S Rasara, Karsar And Maldah Dist- Ballia
Basic Detail
Tender No 06/EWC(A)/2026-27
Bidding Type Tender
Location
City Ballia
State Uttar Pradesh
Key Dates
Publish Date 19 Aug 2026
Submission Date 27 Aug 2026
Open Date 29 Aug 2026
Finance
Tender Value 52.57 Lakhs
Tender Fee 3540
EMD 53000
Exemption Not Available
Document List
BOQ_2214087.xls
d0377ce2-acaf-498f-8c6b-c399c07e13c0.html
Tendernotice_1 (54).pdf
TENDER_FORM_AND_CONDITION_1.rar
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Aug 29, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2214087.xls

html

d0377ce2-acaf-498f-8c6b-c399c07e13c0.html

pdf

Tendernotice_1 (54).pdf

rar

TENDER_FORM_AND_CONDITION_1.rar

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders