Tender For Upgradation Of Cooperative Infrastructure Of Cooperative Marketing Society Sagam At Bindoo (Balance Work)
Tender Value
9.29 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
18596
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Cooperative Infrastructure Of Cooperative Marketing Society Sagam At Bindoo (Balance Work)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing and laying of Stone soling hand packed including carriage complete job. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm N/S |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platforms. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :1:4 Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 12 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners: Second class kail wood |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second kail wood 30mm |
| 15 | Providing & fixing 3.5 mm thick glass panes (weighing not less than 10 kg/sqm) with all fixtures, all complete |
| 16 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 30mm thick |
| 17 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second Class kail wood |
| 18 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 19 | P/F aluminium sliding door bolts ISI marked anodised (anoidic coating not less than AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws complete job 300x16 mm |
| 20 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 21 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 22 | Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete : |
| 23 | Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete : |
| 24 | Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 25 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work of approved brand and manufacture. On wood work |
| 27 | 12 mm thick cement plaster of 1:4 mix ( 1 cement: 4 coarse sand) on walls etc , complete job |
| 28 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick, including Applying one coat of water thinnable cement primer of approved brand and manufacture |
| 29 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coat |
| 30 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 31 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 32 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 33 | Providing and fixing of ornamental wood Cornice of 3'x3''fixed in position with hold fast lugs or with dash fasteners of required dia and length including paintimgs of two or more coats over a coat of wood primer, kail wood |
| 34 | Providing and fixing white vitreous china pedestal type water closet (European type) withseat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. (Jaquar or Equivalent as Per Make List) |
| 35 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 36 | Providing and fixing wash basin with C.I. brackets,15mm C.P brass piller taps, 32 mm C.P. brass waste coupling of standard pattern,including suitable Pedestal, PVC connections to basin mixer, painting of fittings and brackets, cutting and making good the walls wherever required.white viterous china basin size 550x400 mm witn a 15mm CP Brass single hole basin mixer (Jaquar or Equivalent as Per Make List) |
| 37 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm |
| 38 | Providing and fixing mirror of superior glass (of approved quality) and of required shape andsize with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, Rectangular shape 600x450 mm |
| 39 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms |
| 40 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm,height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 41 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats withCP brass screws with concealed fitting arrangement of approved quality and colour, 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 42 | Providing and fixing of 75 mm dia floor trap of approved brand, all fixtures involved,complete job |
| 43 | Providing and fixing of 40 mm dia PVC Pipes (Type B) of approved brand including alliedaccessories like collars, door junctions, socket, bends etc and all other fittings, complete job |
| 44 | Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for supports.Make: Pipe & fittings: VECTUS/Kisan/AKG |
| 45 | .Providing and fixing of 75 mm dia PVC Pipes (Type B) of approved brand including alliedaccessories like collars, door junctions, socket, bends etc and all other fittings, complete jobMake: Pipe & fittings: VECTUS/Kisan/AKG |
| 46 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 25 mm OD(SDR-7.4) |
| 47 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 32 mm OD(SDR-7.4) |
| 48 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats completeof required dia |
| 49 | Providing and fixing PPR Unions PPR union 25 mm |
| 50 | Providing and fixing PPR Unions PPR union 32 mm |
| 51 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 52 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 (Jaquar or Equivalent as Per Make List) |
| 53 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.(Jaquar or Equivalent as Per Make List) |
| 54 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia, (Jaquar or Equivalent as Per Make List) |
| 55 | Constructing masonry Chamber 30x30x30 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand)with necessary pvc cover with frame or cover slab in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5 |
| 56 | Providing in position storage type Hot Water electrical heaters with copper container, insulation, and stove enameled M.S. jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non return valve and 15/20mm dia outlet including making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts) Capacity - Jaquar make |
| 57 | Providing and fixing of Cupboards/Almirrahs/WARDROBES Shelves using 12mm,19mm,6mm water proof plywood and covering the face using 2mm Dunmicka of requiredshape and design incl cost of all fittings(hinges,Magnets locks, handles drawer chanels Etc) |
| 58 | Providing and laying Luxxurious wall-to-wall floor Carpet with base matt in bedrooms, of standard quality, including site measurement. eply, surface preparation, cutting, laying, edge finishing, and complete installation complete job as per direction of Engineer in-Charge |
| 59 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 60 | P/fixing of Blind roller curtain for windows , HDPE Corded,Aluminium pelmet, roller gear system, polyster fabric screeen with 95% sun & UV protection of required size and shade as per directions of Engineer in Charge |
| 61 | Providing , suplying and installation of ''T'' Type centre display rack of ht 6 feet having 5 no of display shelves complete with backsheet, pannel with beeding and stopper bottom shelf with base 18'' deep ist shelve to 4th shelve 18'', 15'', 12'' deep. of tata steelium (CRC) make with shelves of 20sqg, channel 14swg, bracket 12swg, back sheet 22swg, with 7 tank process zinc phosphated powder coated including tranportatio charges complete job. |
| 62 | Supply, installation, testing and commissloning of inverter with 2000 VA ups with 180Ah 12V Double Batteries Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender