Tender For Upgradation Of Various Wards At Govt. Chest Diseases Hospital, Srinagar By Way Of Improvement Of Central Heating System/Oxygen Piping Network Etc With Allied Works.
Tender Value
9.71 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
48583
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Various Wards At Govt. Chest Diseases Hospital, Srinagar By Way Of Improvement Of Central Heating System/Oxygen Piping Network Etc With Allied Works.
BOQ
| Sl. No. | Item Description |
| 1 | Improvement of Central Heating System with allied works |
| 2 | E/W in excavtion in foundation trenches or drains ( not exceeding 1.5 mts in width as well as 10 sqmts on plan) by mannual means including dressing of sides & ramming of botoms, lift up to 1.5mts & lead of 50 mts including getting out the execavated soil and disposal of surplus execavated soil as directed. |
| 3 | Providing & laying dry stone solling, including ramming, dressing etc in foundations with all carriages of material from approved source up to site of work complete job. |
| 4 | Providing & laying cement concrete of specificied grade excl cost of centering and shuttering 1:4:8 (1 cement, 4 coarse sand, 8 graded stone aggregate 20mm nominal size )including all carriages of material. |
| 5 | Demolishing of Brick Work in cement mortor manually / by mechanical means including disposal of unservisible material within a lead as directed by Engineer in charge. |
| 6 | Providing & laying in position reinforced cement concrete 1:2:4 (1cement:2 coarse sand: 4graded stone agg 20mm nominal size) mix of specificied grade excl cost of centering and shutteringincluding all carriages of material. All work upto plinth level. |
| 7 | Reinforced cement concreate worl in beams suspended floors roofs landings shelves counters etc. in 1:1.5:3 mix exluding the cost of shuttering and centering but incld. All carraiges complete |
| 8 | Centering and shuttering including strutting, propping etc and removal of form work (Including all carriages of material from approved source up to site of work complete job.) For Foundations, footings, bases of columns etc. |
| 9 | Centering and shuttering including strutting, propping etc and removal of form work (Including all carriages of material from approved source up to site of work complete job.) For Suspended Floors |
| 10 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation & plinth, including extra for brick work in superstructure above plinth level upto floor V level by manual means in cement mortar 1:6 mix (1 cement :6 coarse sand), Including all carriages |
| 11 | Providing and fixing Aluminium work (Powder coated ) for doors, windows ventilators and partitions with extruded built up standard tabular section / appropriate z sections and other sections of approved make conferming to IS: 733 and IS: 1285 fixed with dash fastener includding neccessary fittings rubber washers complete etc |
| 12 | Providing and fixing of glazing with 5mm float glass or 12 mm thick prelaminated particle board including all fittings and fixtures complete for windows doors etc |
| 13 | 12 mm cement plaster of mix 1:6. (1 cement : 6 coarse sand). Including all carriages of material from approved source up to site of work complete job. |
| 14 | Providing & fixing of Machine cut granite of standrad quality with pre moudling for counter, stair Steps in 1:4 cement mortor approved color and shade |
| 15 | Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and bending all complete.(TMT bars) |
| 16 | Providing & applying wall care putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 17 | Providing and applying of washible Emulsion of approved brand and manufacture to give an even shade two or more coats on new work and including priming coat with cement primer. |
| 18 | Structural steel work welded in built up sections trusses and framed work, including cutting, hoisting, fixing in positions and applying a priming coat of approved steel primer all complete. |
| 19 | Providing and fixing G.S sheet roofings fixed with self screws or J or L hooks (size, shape and pitch of as approved by Engineer-in- charge) 0.50 mm with zinc coating not less than 275 gram/Sqm |
| 20 | Providing & fixing of coloured Ridges, Hips & Valleys including cost J or L hooks, bolts and nuts, washers etc with all carriages of material from approved source up to site of work complete job. |
| 21 | Dismentalling of Bathroom floor including WC, wall tiles, fittings, 3no mainholes, blocked PVC pipes etc complete and disposal of unservisible material upto the lead of 50 metres. |
| 22 | Providing & fixing of Indian type WC pan including Low level cistern PVC 10 liters of standrad quality. |
| 23 | Providing & fixing Ist quality ceramic glazed tiles of minimum thickness 5 mm of approved make in all colours & shades in cement motor 1:3 mix. Including all carriages complete job. |
| 24 | Providing & fixing of concealed G.I.pipes 15mm complete with G.I.fittings. C Class |
| 25 | Providing & fixing PVC connection 18''. |
| 26 | Providing & fixing of 50 litre capacity geyser of isi mark including all fittings & fixtures complete job. |
| 27 | Providing & fixing of wall mixer non telephonic for bath Rooms of approved quality. |
| 28 | Providing & fixing of centre hole Steel Wash basins of approved quality. |
| 29 | Providing & fixing of mixer of approved quality for Sink. |
| 30 | Providing & fixing of CP Angle value. |
| 31 | Providing and fixing of CP Bib Cock of approved quality |
| 32 | Providing & fixing of looking mirror of standrad quality. |
| 33 | Providing & fixing of towel ring. |
| 34 | Providing & fixing of soap cases. |
| 35 | Providing & fixing CP grating 100mm. |
| 36 | Providing & fixing PVC pipes 100mm. B Class |
| 37 | Providing & fixing PVC pipes 50 mm. B Class |
| 38 | Providing & fixing of PVC Storage Tank including all fittings & fixtures complete job. |
| 39 | Providing & fixing of 20 mm Ball Value. |
| 40 | Providing and fixing of PPR pipes 20mm dia including all fittins and fixtures complete |
| 41 | Providing and fittings of electrical lighting points including cost of copper wire, switch, MCB, ceillig rose approved make incl screw conduit all complete |
| 42 | Providing and fittings of electrical Heating points including cost of copper wire, switch, MCB, ceillig rose approved make incl screw canduit all complete |
| 43 | Dismantelling of hot water cast iron radiators of assorted sizes installed in wards 01 & 02 of CD hospital in order to carry out beautification works by R&B Division, Srinagar. The job includes shifting of the radiators/convectors to a safer place for storage and blocking of the inlet/outlet of the feeding hot water piping by means of MS plugs of required size to be provided by the contractor. The job also includes cleaning/descaling of the radiators/convectors. The job also includes refitting of the radiators/convectors at their actual places after the beautification work gets completed by the R&B department. The job also includes replacement of damaged valves/nipples/brackets etc where ever necessary for smooth functioning of the same. |
| 44 | Painting Surfaces of dismentalled radiators by way of applying two coats of heat resistant metal paint after repairing and cleaning of the shields and making the surface smooth. |
| 45 | Dismantelling of hot water MS Piping of 20/25/32 mm dia installed in wards 01 7 02 at CD hospital in order to carry out renovation works by R&B Division, Srinagar. The job includes shifting of the of the same to the safer place and refitting of the same after execution of civil works by R&B Department |
| 46 | Supply, installation, testing and commissioning of Mild Steel class ‘C’ ERW pipes of 20mm diameters with fittings like tees, elbows, bends, junctions, unions, flanges etc.The job encompasses coating the M.S pipe line with two coats of primer. |
| 47 | Supply, installation, testing and commissioning of Mild Steel class ‘C’ ERW pipes of 25mm diameters with fittings like tees, elbows, bends, junctions, unions, flanges etc.The job encompasses coating the M.S pipe line with two coats of primer. |
| 48 | Supply, installation, testing and commissioning of Mild Steel class ‘C’ ERW pipes of 32mm diameters with fittings like tees, elbows, bends, junctions, unions, flanges etc.The job encompasses coating the M.S pipe line with two coats of primer. |
| 49 | Providing, Fitting and Testing of 20 mm dia ball valve along with necessary fittings SS (PN 16) |
| 50 | Providing, Fitting and Testing of 25 mm dia ball valve along with necessary fittings SS (PN 16) |
| 51 | Providing, Fitting and Testing of 32 mm dia ball valve along with necessary fittings SS (PN 16) |
| 52 | Dismantling of wall mounted MGPS pipelines and by proper disconnection from mountings, fittings followed by due storage. The job includes dismantling of Bed Head Pendants (38 No), Nitrious Oxide points 38 Nos . The job includes cutting of copper pipes using cutter in lengths and later on shifting of the same to the boiler house and stacking of the same in supervision of Section or Engineer In charge. The job includes making the end of the piping blind by means of arc or gas welding. The job further includes refitting of all the dismentlled items after the completion of civil works by Rand B department. |
| 53 | Providing,Fitting& testing of seamless copper tubing,solid drawn of thickness 0.9mm for oxygen line.The copper tubing shall be seamless hard tempered as per ASTM-2-01/AISI/BIS.The job includes cutting of copper tubing,silver brazing,polishing including providing and fitting of copper fittings like nipples,sockets,elbows,reducers ,tees etc.The copper tubing shall be fitted on the wall with the help of saddles,clamps etc and shall have to be tested at a pressure 3 times than the working pressure of oxygen.The tubing shall be applied with 2 coats of paint as per standard colour code. |
| 54 | Provision for Providing, fitting and testing of new BPC oxygen flow meter with humidifier bottles connected to the self sealing valves of oxygen. BPC oxygen flow meter shall be offering the latest technical improvements for a precise measuring of the flow, with +/-5% accuracy. The body of the flow meter shall be chrome plated Brass, graduated flow tubes and cover made of polycarbonate. The flow meters shall have adjustable flow by needle valve with micro metrical regulation. The flow meter shall be able to compensate back pressure and shall have a standard flow of 0-15 LPM. The inlet filter of flow meter shall be made of stainless steel wire net and is be connected to the outlet of self sealing valve with humidifier bottles. This includes providing and fitting of necessary copper fittings complete in all respects. |
| 55 | Providing,fitting and testing of 12mm ball type main isolation valves alongwith complete fittings.The valves shall be of brass metal. |
| 56 | Re-orientation & Improvement of Oxygen Piping Network with allied works |
| 57 | Dismantling safely copper piping, by way of employing skilled labour and necessary tools, from Boiler house to New Oxygen Plant at CD hospital. The job includes cutting the piping in desired lengths sorting of the same and storing safely the reusable pipe and lateron refitting of the same as per the directions of the site engineer. Necessary fittings, brazing material and all other tools and tackles required for smooth testing of the pipe line are to be arranged by the contractor. |
| 58 | Providing,Fitting& testing of 15 mm seamless copper tubing,solid drawn of thickness 0.9mm for oxygen line.The copper tubing shall be seamless hard tempered as per ASTM-2-01/AISI/BIS.The job includes cutting of copper tubing,silver brazing,polishing including providing and fitting of copper fittings like nipples,sockets,elbows,reducers ,tees etc.The copper tubing shall be fitted on the wall with the help of saddles,clamps etc and shall have to be tested at a pressure 3 times than the working pressure of oxygen.The tubing shall be applied with 2 coats of paint as per standard colour code. |
| 59 | Providing,fitting and testing of 15 mm ball type main isolation valves alongwith complete fittings.The valves shall be of brass metal. |
| 60 | Structural steel work (Welded) in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender