Tender For Municipal Council, High Mast Light Installation Work In Front Of Prince Petrol Pump On Bah Thetav Road.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Sep 2026
14 days left
EMD
75955
Bank guarantee accepted
Document Fee
897
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Municipal Council, High Mast Light Installation Work In Front Of Prince Petrol Pump On Bah Thetav Road.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of 16 M high must shaft of approved make with rising system hot dip galvanized inside and outside dip having pole seed thickness 4 mm top Dia minimum 150 mm Bottom Dia minimum 360 mm base plate 32 mm thick suitable for wind velocity as per is 875 part 3 and having no circumferential weld with accessories for high must such as had frame suitable for 6 luminaries and its control gearbox 1.5 HP power tool motor 3 point suspension system with steel wire rope 6 mm dia double drum bench including making suitable Foundation as per manufacturer drawing/ site requirement along with Foundation bolts nuts washer anchor plate etc complete in all respect |
| 2 | Supply and fixing of factory wired integral LED Flood light luminaires with die cast aluminium body with toughend glass/UV stabilized PC cover and lenses built with mandatory driver set suitable for 170 to 200 Watt Confirming to IP 66 and IK07 and above Protection complete in all respect including labour. |
| 3 | Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) CPRI approved |
| 4 | Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc. |
| 5 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRCfuses, isolating switch metering instrument & instrument box with CTs etc. in case of 40 TPN, complete in all respect |
| 6 | Supply and laying of 10sq. mm 4 Core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 7 | S&F of mica Junction plate with MCB and connection pin. M.R. |
| 8 | L/C of numbering of poles letter writing with paint with Radium Strip/ Tapping size 2\\"x3\\" as directed engineer of incharge |
| 9 | Supply and Wiring of sub mains with 6sqmm*4Core copper cable under Pole SOR.FRLSH PVC insulated multi strand copper conductorcable. 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for4 X 6 sq. mm (25mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required |
| 11 | Supply and laying 25mm x 5mm G.I. strip at 0.50 mtr. Below ground as strip earth electrode, including connection /terminating with G.I. nut, bolt spring, washer etc as required . |
| 12 | Cutting/ moiling of the road for cable passing in 50mm dia. G.I.pipe drill/ cutter machine for earth work |
| 13 | Supplying and making end termination with brass compression gland and aluminium lugs for4 X 10 sq. mm (25mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required |
| 14 | Supply and fixing of a single-piece LED strip light of 18 meters with inbuilt actual Tri-Color. The strip should have an IP65 rating for protection against dust and water and must contain a minimum of 72 LEDs per meter for better uniformity. It should also have wide voltage protection ranging from 160V to 360V and come with an onsite warranty of 1 year. |
| 15 | Supply and fixing of iron bracket at top and at bottom to support the LED light `` |
| 16 | add 18% GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender