Tender For Mending Damages Of Potholes Formed Due To Excessive Rainfall And Flood Like Situation On Different Locations On Lodhasuli - Dahijuri - Kupannad Road (Sh-5) In Between Chainage 17.50Km To 19.50Km Under Jhargram Division, Pwd In The District
Tender Overview
Project Description
Tender for Mending Damages Of Potholes Formed Due To Excessive Rainfall And Flood Like Situation On Different Locations On Lodhasuli - Dahijuri - Kupannad Road (Sh-5) In Between Chainage 17.50Km To 19.50Km Under Jhargram Division, Pwd In The District Of Jhargram.
BOQ
| Sl. No. | Item Description |
| 1 | Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).On Granular surface treated with primer @ 0.25kg-0.30 /sqm. Using C.B. Emulsion (RS1 Type) @ 0.275 Kg / m2 |
| 2 | Repairing Pot-holes with Bituminous Macadam (Grading - II, for compacted thickness of upto 75mm)Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cutting the edges to get a firm vertical face and by removing all the failed and loose materials including dust and applying tack coat evenly on the sides and on the surface as per specification, rolling the filled depression with 8-10 tonne smooth wheeled roller to achieve the desired compaction, including the cost and carriage of stone aggregates and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of all operational staff, quality control except the cost of tack coat complete as per direction of Engineer-in-charge. Payment to be made on the basis of the loose net volume of the stone aggregates used in the work. |
| 3 | Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).On bituminous surface @ 0.20kg0.3kg /sqm.Using C.B. Emulsion (RS1 Type) @ 0.25 Kg / m2 |
| 4 | Open - Graded Premix SurfacingProviding, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510).Open-Graded Premix Surfacing using cationic Bitumen Emulsion |
| 5 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type B seal coats (Reference to MORT&H's specification clause 511). Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. |
| 6 | Add : GST @18% (Eighteen Percent) on Rs.4,14,040.00 i.e. Total Amount over item No. 1 to 5 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender