Tender For Energization Of Lighting Distribution Boards, Including Laying And Termination Of Cables, Shifting, Installation, Testing And Commissioning Of Electrical Panels For Wmp, Frfcf, Kalpakkam
Tender Value
32.49 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
10 days left
EMD
64999
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Energization Of Lighting Distribution Boards, Including Laying And Termination Of Cables, Shifting, Installation, Testing And Commissioning Of Electrical Panels For Wmp, Frfcf, Kalpakkam
BOQ
| Sl. No. | Item Description |
| 1 | Loading, Transportation, Unloading at site,installation, Testing and Commissioning of 1100Volts Grade PVC/HRPVC/XLPE insulated,Stranded Aluminium/copper conductor cables offollowing sizes in built-in trenches, on walls,poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department).(Refer Sec VI,Clause No.3)Size:-3/3.5/4core X Upto 25 sqmm |
| 2 | Loading, Transportation, Unloading at site,installation, Testing and Commissioning of 1100Volts Grade PVC/HRPVC/XLPE insulated,Stranded Aluminium/copper conductor cables offollowing sizes in built-in trenches, on walls,poles and through embedded pipes includingsupply of GI spacer, clamps etc and as per thedetailed specification . (Note: Cable will be issuedfree of cost by the department).(Refer Sec VI,Clause No.3)Size:-3/3.5/4Core X above 25 & up to 120 sqmm |
| 3 | Loading, Transportation, Unloading at site,installation, Testing and Commissioning of 1100Volts Grade PVC/HRPVC/XLPE insulated,Stranded Aluminium/copper conductor cables offollowing sizes in built-in trenches, on walls,poles and through embedded pipes includingsupply of GI spacer, clamps etc and as per thedetailed specification. (Note: Cable will be issuedfree of cost by the department).(Refer Sec VI,Clause No.3)Size : 3/3.5/4Core X above 240 & up to 400 sqmm |
| 4 | Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3)Size:- 3/3.5/4 Core X Above 240 sqmm to 3/3.5/4Core X 400 sqmm |
| 5 | End Termination of the following size Copper Conductor PVC/XLPE Insulated and FRLS sheathed armoured UG Cable using Single Compression, Heavy Duty, Siemens type Brass Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Copper crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1).4C x 2.5 Sq.mm including cable gland earthing |
| 6 | End Termination of the following sizes of Aluminium Conductor PVC Insulated andsheathed armoured UG Cable using SingleCompression, Heavy Duty, Gland connecting thecable to the equipment such as Switches/PanelBoards etc. using Comet or equivalent makeAluminium crimping lugs as directed byEngineer-in-Charge. The rate shall include thecost of supply of Cable Gland and Lugs. TheContractor shall arrange for making holeswherever necessary for fixing cable gland.(Refer Sec VI, Clause No.10.1).Size:- 4C x 16 sq.mm. including cable gland earthing |
| 7 | End Termination of the following sizes of Aluminium Conductor PVC Insulated andsheathed armoured UG Cable using SingleCompression, Heavy Duty, Gland connecting thecable to the equipment such as Switches/PanelBoards etc. using Comet or equivalent makeAluminium crimping lugs as directed byEngineer-in-Charge. The rate shall include thecost of supply of Cable Gland and Lugs. TheContractor shall arrange for making holeswherever necessary for fixing cable gland.(Refer Sec VI, Clause No.10.1).Size:- 3.5/4 C x 35 sq.mm including cable gland earthing |
| 8 | End Termination of the following sizes of Aluminium Conductor PVC Insulated andsheathed armoured UG Cable using SingleCompression, Heavy Duty, Gland connecting thecable to the equipment such as Switches/PanelBoards etc. using Comet or equivalent makeAluminium crimping lugs as directed byEngineer-in-Charge. The rate shall include thecost of supply of Cable Gland and Lugs. TheContractor shall arrange for making holeswherever necessary for fixing cable gland.(Refer Sec VI, Clause No.10.1).Size: 3.5/4C x 50/70 sq.mm including cable gland earthing |
| 9 | End Termination of the following sizes of Aluminium Conductor PVC Insulated andsheathed armoured UG Cable using SingleCompression, Heavy Duty, Gland connecting thecable to the equipment such as Switches/PanelBoards etc. using Comet or equivalent makeAluminium crimping lugs as directed byEngineer-in-Charge. The rate shall include thecost of supply of Cable Gland and Lugs. TheContractor shall arrange for making holeswherever necessary for fixing cable gland.(Refer Sec VI, Clause No.10.1).Size:- 3.5C x 95/120 sq.mm including cable gland earthing |
| 10 | End Termination of the following sizes of Aluminium Conductor PVC Insulated andsheathed armoured UG Cable using SingleCompression, Heavy Duty, Gland connecting thecable to the equipment such as Switches/PanelBoards etc. using Comet or equivalent makeAluminium crimping lugs as directed byEngineer-in-Charge. The rate shall include thecost of supply of Cable Gland and Lugs. TheContractor shall arrange for making holeswherever necessary for fixing cable gland.(Refer Sec VI, Clause No.10.1).Size:- 3.5C x 400 sq.mm including cable gland earthing |
| 11 | Supply, installation, testing and commissioning of the following SDFU with factory made enclosure with 3Nos Fuse links on MS frame work as per the scope of work. (MS item will be measured separately). (Refer Sec VI, Clause No.14). SDFU TPN 63A, DIN FUSES with 3Nos 63A HRC fuse links, Sheet steel enclosure FN Cat No:SK90484 |
| 12 | Supply, installation, testing and commissioning of thefollowing SDFU with factory made enclosure with 3NosFuse links on MS frame work as per the scope of work.(MS item will be measured separately). (Refer Sec VI,Clause No.14.1).Rating:SDFU TPN 125A, DIN FUSES with 3Nos 125A HRC fuselinks, Open Execution FN Sheet steel enclosure FN CatNo:SK90486 |
| 13 | Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11).MS fabrication 1 coat primer & 2 coats synthetic enamel paint |
| 14 | Shifting of Electrical equipment/cable drums of various sizes including loading and unloading/Shifting of electrical/telephone items from FRFCF and hand over to service centres (upto FRFCF Premisis only) or vice versa.(Refer Sec VI (MNC), Clause No.31).Heavy Electrical equipment/cable drums (more than 500 kg and upto 5 Tons) within a distance of 5 kM |
| 15 | Installation, Testing and commissioning of MLPP panel each with 6 vertical sections as outgoings and 1 no.of incomer panel as per tender specifications. It includes proper alignment, interconnection of busbars, tochup paint on corroded surface of panel, updation of drawings, testing and submission of panel reports etc.(Note: MLLP panels will be issued free of cost by the department) |
| 16 | Installation, testing and commissioning of 400A LT panel with 3 vertical sections as per tender specifications.It includes proper alignment, tochup paint on corroded surface of panel, updation of drawings, testing and submission of panel reports etc. (Note: 400A LT panels will be issued free of cost by the department) |
| 17 | Maintenance of Power control centres/Motor Controlcentres/Bus duct /LT Distribution panels includingswitch fuse unit in panel excluding ACB maintenance.(Refer Sec VI (MNC), Clause No.17.2).Cubicle switch boards having number of verticalsections up to 3 |
| 18 | Maintenance of Power control centres/Motor Controlcentres/Bus duct /LT Distribution panels includingswitch fuse unit in panel excluding ACB maintenance.(Refer Sec VI (MNC), Clause No.17.2).Cubicle switch boards having number of vertical sections more than 3 |
| 19 | Maintenance of Power and Lighting Distribution Boards located in various Buildings/Laboratories in FRFCF Complex (Refer Sec VI (MNC), Clause No.17.3).8/12 Way 16/32/63 Amps MCB Distribution Bards |
| 20 | Supply and installation of surface mounting powder coated TPN 250A,3Ph, 415V, 50Hz,12way Vertical DB with 1no.of I/C-4P, 250A MCCB and 12 no.s of O/G,s 3P,63A MCB with all accessories as per the scope of work |
| 21 | Excavation of soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2) |
| 22 | Overhauling, Painting and test running of the followingsingle/three phase motors as per the scope of work. (Refer Sec VI (MNC), Clause No.14.1).50.0/60.0 HP/75.0 HP Motor |
| 23 | Overhauling, Painting and test running of the followingsingle/three phase motors as per the scope of work. (Refer Sec VI (MNC), Clause No.14.1).120.0 HP/180.0 HP Motor |
| 24 | Fabrication, Supply and Testing of RCCB based single phase extension board along with 10mtrs. Of 3core 2.5Sq.mm flexible copper cable as per the tender specifications |
| 25 | Supply, cleaning the floor, proper pasting and installation of following insulating mat as per specification. (Refer Sec VI, Clause No.25).2.0 mm thickness, Max useable voltage 3.3kV, AC Proof voltage 10kV for 3 minutes, AC dielectric strength 30kV RMS Insulating Mat confirming to IS:15652 |
| 26 | Supply and installation of the following sizes of copper wires in built in trench as per the detailed specification.(Refer Sec VI, Clause No.12.8)8 SWG copperwire |
| 27 | Supply and Installation of following general electrical items as per the detailed specification (Refer Sec VI (MNC), Clause No.5).3.0 mm thick white finish Hylam sheet covers for MS switch Boxes/ JBs of Sizes up to 400 x 400 mm as per the scope of work. |
| 28 | Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation. (Refer Sec VI, Clause No.12.9).25 X 6 mm GI flat Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender