Tender For Installation Of 500Sq.Mm D/C 132 Kv S/C Xlpe Underground Copper Cable (2X2 Phase+1Spare) From 220Kv Gss Dahra & 132Kv Digod Tss (Route Length Approx. 0.7Kms) In The Switchyard Of 220Kv Gss Dahra
Tender Value
9.34 Crore
Estimated cost
Bid Submission
22 Sep 2026
27 days left
EMD
18.68 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of 500Sq.Mm D/C 132 Kv S/C Xlpe Underground Copper Cable (2X2 Phase+1Spare) From 220Kv Gss Dahra & 132Kv Digod Tss (Route Length Approx. 0.7Kms) In The Switchyard Of 220Kv Gss Dahra
BOQ
| Sl. No. | Item Description |
| 1 | Overhead Line |
| 2 | Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc. |
| 3 | 220KV D/C TTD-STUB N.B. |
| 4 | 220KV D/C TTD-SUPERSTRUCTURE N.B. |
| 5 | Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. ) |
| 6 | Supply of Earthing material of Towers |
| 7 | Pipe Type |
| 8 | Supply of following Tower Accessories |
| 9 | Danger Plate |
| 10 | Number Plate |
| 11 | Phase Plate (Set of three) |
| 12 | Design, manufacture and supply of following line material. 11/ kV 70KN |
| 13 | i) Disc Insulators |
| 14 | Design, manufacture and supply of following line material. 11/ kV 120KN |
| 15 | i) Disc Insulators |
| 16 | ACSR Panther Conductor |
| 17 | Hardware Fittings for ACSR Panther Conductor |
| 18 | Single Suspension H/W fittings for ACSR Panther Conductor |
| 19 | Single Tension H/W fitting for ACSR Panther Conductor |
| 20 | Accessories for ACSR Panther Conductor |
| 21 | Vibration Damper for ACSR Panther Conductor |
| 22 | PG Clamp (Panther-Panther) |
| 23 | T Clamp (Panther to Panther) |
| 24 | GSS Earth Wire (7/3.15mm) |
| 25 | Accessories for Earth Wire |
| 26 | Vibration Damper for Earth Wire |
| 27 | Tension Hardware for Earth Wire |
| 28 | Underground Cable |
| 29 | 132 kV, Single Core, 500 Sq. mm XLPE Copper Cable as per foregoing specification requirements |
| 30 | 145 kV rated voltage pre-moulded outdoor end termination kit complete with accessories suitable for the above underground cable |
| 31 | 145 KV rated voltage Pre-moulded straight through joint suitable for above cable |
| 32 | Solid bonding Link box with Link plates, bonding & grounding cable complete with other associated accessories for 1-phase |
| 33 | Galvanized Steel Supporting Structures/ arrangement, gantry structure, ladders etc along-with clamps, connectors, nut-bolts, washers, foundation bolts etc. for suitable and safe termination of XLPE cable from terminal towers maintaining statutory clearances and safety as per IE rules |
| 34 | Earthing Material including cast iron pipes with suitable clamps, charcoal, common salt etc |
| 35 | Terminal connector suitable for ACSR Panther on the Outdoor cable termination to connect cable end termination to ACSR panther Line. |
| 36 | Warning Tapes as per Specification |
| 37 | 132 kV class of 120 kV rating LA/Surge Arrester with grading ring, discharge counter with Milli meter |
| 38 | Terminal connector suitable for ACSR Panther on Surge Arrester (Terminal connector suitable for ACSR Panther on the Outdoor cable termination to connect cable end termination to ACSR panther Line) |
| 39 | Any Other item required for successful completion of work |
| 40 | Note: * Quantity indicated is for evaluation purpose. Actual quantity to be supplied after getting approval. |
| 41 | Details Survey as per tenrative route Which includes the following majar activities- Pegging of line route, providing of servey pillar at an interval of 3-4 Km in the line route with required jungle clearance for survey, Profile preparation of approved route on graph sheet and marking of offset on eighter side of line, marking of side clearance for hills, sand dunes etc. as per specification and tower scheduling. |
| 42 | Check survey as per approved route of line which includes-Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site. |
| 43 | Land Compensation |
| 44 | Identification of Land, RoW Corridor marking, land owner identification, and area measurement as per Annexure-A and GoR notifications |
| 45 | Documentation and preparation of land compensation cases including DLC rates collection as per Annexure-A and GoR notifications |
| 46 | Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming and watering as per specification. |
| 47 | (i) Towers including extension upto 9Meters |
| 48 | EARTHING |
| 49 | Earthing of towers with pipe type earthing excluding the supply of Pipes, wires, flates& connectors, but including coke / charcoal, etc. excavation, augering, and backfilling in all types of soil. |
| 50 | ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint |
| 51 | Erection of tower (with extension upto 9 Meters) |
| 52 | Conductor Stringing: Stringing of ACSR panther conductor including hoisting of insulator string, laying, jointing & tensiong of conductor, clamping with armour rods and fixing of vibration damper per route KM of the line. |
| 53 | 4 Conductor for D/C Line |
| 54 | RESTRINGING OF CONDUCTOR/EARTH WIRE |
| 55 | (A) Restringing of ACSR Panther conductor:-Dismantling of vibration dampers and armour rods, fitting in rollers, de-tensioning, holding & lowering of conductor, de-hoisting of insulator string as required, adding/ removing and jointing of conductor, hoisting of insulator string, lifting of conductinto rollers and re-tensioning, jointing, fitting of armour rods and vibration dampers and clamping per route KM of the line section to be restrung dismantled material not re-used to be deposited in our stores & stacked. |
| 56 | 4 conductor for D/C Line |
| 57 | Dismantaling of Towers : Dismanteling of Superstructures alongwith extensions having tack welded bolts & nuts, including removal of D Shackles, hengers, U Bolts, step Bolts, ACD, Danger Plate, Number Plate, Phase Plate of tower including transportation from site to our store and stacking of all material |
| 58 | 132kV S/C & D/C Towers |
| 59 | Sub Station Structures |
| 60 | DESTRINGING OF CONDUCTOR- De-stringing up to ACSR Panther Conductor, Dismanteling of vibration dampers and armour rods, removal of conductor from clamps and fitting in rollers, removal of conductor from clamps and fittings in roller, detensioning, dehoisting of insulator string as required and collecting the material & depositing the same in our store |
| 61 | Single Conductor |
| 62 | Destringing of Earth wire :Dismantling of earth bonds, vibration dampers, declipping & fitting in rollers, detensioning and collecting the material & depositing the same in our store and stacking. |
| 63 | One No. 7/3.15mm galvanised wire |
| 64 | Excavation:- Excavation, excluding back filling, including shoring, shuttering, dewatering etc. upto the required depth as per foundation specification / drawings. |
| 65 | (i) Any soil soft rock other than Hard rock |
| 66 | Hard Rock |
| 67 | CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings. |
| 68 | 1:3:6 Mix |
| 69 | 1:1.5:3 Mix |
| 70 | Steel Reinforcement |
| 71 | Supply, Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material. |
| 72 | CABLE INSTALLATION WORK |
| 73 | Detailed Survey |
| 74 | Surveying of cable route, excavation of trial holes as per field requirement, preparation of cable route profile, drawing of cable laying, final route alignment marking lines and grades/ preparation of final cable route drawing after approval and preparing bill of materials for complete route shown in drawing i.e. between terminal towers |
| 75 | Evaluation of thermal resistivity of soil along cable route (as per technical specification) |
| 76 | Handling, Transportation to site and laying of 132 kV, Single Core, 500 Sq. mm XLPE Copper Cable as per foregoing specification requirements |
| 77 | Handling and making of straight through joints for 132 KV single core 500 Sq mm power cable(XLPE Copper cable) as per specification |
| 78 | Establishing of double ckts. (2x2 Phase + 1 Spare) 132 KV single core, 500 sq. mm copper cable in trifoil formation alongwith pilot fiber cable, providing of warning tap tagging fixing, pipes for drain and gate crossing as per drawings and specifications in trench by pulling, drawing, etc. including cable, using stendard cable installation equipements and as per direction of the engineer incharge and returning of unused items at store |
| 79 | Handling and making of outdoor type cable end terminations for 132 kV single core power cable as per specification |
| 80 | Erection of Galvanized Steel Supporting Structures/ arrangement, gentry structure, ladders etc along-with clamps, connectors, nut-bolts, washers, foundation bolts etc. for suitable and safe termination of XLPE cable from terminal towers maintaining statutory clearances and safety as per IE rules for each phase. (Structure to mount link boxes, cable end termination and surge arrester for each phase) |
| 81 | Erection of solid bonding Link box with Link plates, bonding & grounding cable complete with other associated accessories for 1-phase. |
| 82 | Earthing Material including cast iron pipes with suitable clamps, charcoal, common salt etc. complete set for each Cable Circuit(2x2 Phase + 1 Spare) |
| 83 | Installation of Terminal connector suitable for ACSR Panther to connect cable end termination to ACSR panther Line. |
| 84 | Installation of 132KV Class of 120KV rating Surge Arrester with grading ring,discharge counter with Mili meter |
| 85 | Charges for conducting pre-commissioning tests as per specification and successful commissioning of circuits |
| 86 | Civil Works |
| 87 | Cutting Black Bitumen surface up-to any depth including all layers of crust for laying Power Cables etc, staking of useful material and disposal of surplus debris including all leads including barricading, providing danger board/diversion board, lighting, reflectors etc. |
| 88 | Earth work in excavation for buried cable trenches/foundations including dressing of sides and ramming of bottoms, lift up to 2.5 mtr. including taking out the excavated soil & backfilling of jhiri with watering & ramming , timbering & shoring ( wherever required ) disposal of surplus excavated soil as directed with all lead and lift including barricading, providing danger board/diversion board, lighting, reflectors etc.(Any Soil other than hard rock) |
| 89 | Providing and laying of Cement concrete including curing, etc using stone aggregate 40 mm nominal size (crusher broken) in foundation plinth, excluding the cost of shuttering using 1 cement: 4 sand: 8 stone aggregate (For equipment foundation, junction box etc.) |
| 90 | P&L cement concrete in R.C.C. work in foundation ,rafts, footings, strap beams ,bases of columns etc., including curing ,compaction, finishing with rendering in cement sand mortar 1:3 (1cement :3 sand) and making good the joints , excl., the cost of centring and shuttering and reinforcement :M-20 grade mix 1:1.5:3 (1cement:1.5coarse sand : 3 graded stone aggregate 20 mm nominal size (For equipment foundation, junction box , culvert etc.) |
| 91 | Providing & Fixing of steel fabrication made of angles, tees, square bars or other flats black pipe with hold fast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 92 | Providing & fixing of reinforced ferro cement cable trench covers designed for A & AA loading duly marked on cover with adequate reinforcement having thickness 75 mm to 100 mm anti corrosive bitumen painted MS plate Rim and MS lifting hooks admixtures like plasticizer bond -improving compound shrinkage resistance compound abrasion resistant complete as per approved design(for cable joint box )(for any span) |
| 93 | Providing & Laying HDPE pipe heavy duty of approved make jointed with solvent cement |
| 94 | 250mmdia.(for 3 phase formation) |
| 95 | (ii) HDPE PLB Duct for Optical Fiber Cable |
| 96 | Supply and laying inter locking RCC cable covers as per approved drawing |
| 97 | Supply, spreading of clean river sand in the cable trench and cable joint pit as per specification. |
| 98 | Providing & Fixing Cable Route Marker along the route of cable at the spacing of 50 meter etc. as per drawing and site requirement. |
| 99 | RR Stone masonary in F/P CSM 1:4 |
| 100 | Plastering 20mm thickness CSM 1:6 |
| 101 | Providing and laying plane cement concrete M20 grade |
| 102 | Providing and fabricating steel reinforcement for R.C.C. work bending ,placing in position and binding complete including cost of binding wire in foundation ,raft footing ,strap beams base of column etc., up to plinth level hot rolled deformed (I.S.1139) cold twisted (I.S.1786)bars (For equipment foundation, junction box \ etc.) |
| 103 | Centring and shuttering with plywood or steel plates including strutting, propping bracing both ways with wooden members and removal of formwork for superstructure up to 4.5m height above plinth level for (For equipment foundation, junction box etc.) |
| 104 | Any Other item required for successful completion of work |
| 105 | Note: * Quantity indicated is for evaluation purpose. Actual quantity to be supplied after getting aproval.++One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW/Approach Fibre Optic cable. |
| 106 | Overhead Line |
| 107 | Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc. |
| 108 | 220KV D/C TTD-STUB N.B. |
| 109 | 220KV D/C TTD-SUPERSTRUCTURE N.B. |
| 110 | SST for 220KV D/C TTD N.B.Tower |
| 111 | Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. ) |
| 112 | Supply of Earthing material of Towers |
| 113 | Pipe Type |
| 114 | Supply of following Tower Accessories |
| 115 | Danger Plate |
| 116 | Number Plate |
| 117 | Phase Plate (Set of three) |
| 118 | Design, manufacture and supply of following line material. 11/ kV 70KN |
| 119 | i) Disc Insulators |
| 120 | Design, manufacture and supply of following line material. 11/ kV 120KN |
| 121 | i) Disc Insulators |
| 122 | ACSR Panther Conductor |
| 123 | Hardware Fittings for ACSR Panther Conductor |
| 124 | Single Suspension H/W fittings for ACSR Panther Conductor |
| 125 | Single Tension H/W fitting for ACSR Panther Conductor |
| 126 | Accessories for ACSR Panther Conductor |
| 127 | Vibration Damper for ACSR Panther Conductor |
| 128 | PG Clamp (Panther-Panther) |
| 129 | T Clamp (Panther to Panther) |
| 130 | 24 Fiber OPGW Cable Accessories |
| 131 | H/W Set-24 Fiber OPGW Fiber Optic Cable |
| 132 | Joint Box(24 Fiber) OPGW Cable |
| 133 | Underground Cable |
| 134 | 132 kV, Single Core, 630 Sq. mm XLPE Copper Cable as per foregoing specification requirements |
| 135 | 145 kV rated voltage pre-moulded outdoor end termination kit complete with accessories suitable for the above underground cable |
| 136 | 145 KV rated voltage Pre-moulded straight through joint suitable for above cable |
| 137 | Solid bonding Link box with Link plates, bonding & grounding cable complete with other associated accessories for 1-phase |
| 138 | Galvanized Steel Supporting Structures/ arrangement, gantry structure, ladders etc along-with clamps, connectors, nut-bolts, washers, foundation bolts etc. for suitable and safe termination of XLPE cable from terminal towers maintaining statutory clearances and safety as per IE rules |
| 139 | Earthing Material including cast iron pipes with suitable clamps, charcoal, common salt etc |
| 140 | Terminal connector suitable for ACSR Panther on the Outdoor cable termination to connect cable end termination to ACSR panther Line. |
| 141 | Warning Tapes as per Specification |
| 142 | Optical Fibre Cable and associated accessories/items as per specification (2 Runs of 12 Fibre each) |
| 143 | 132 kV class of 120 kV rating LA/Surge Arrester with grading ring, discharge counter with Milli meter |
| 144 | Terminal connector suitable for ACSR Panther on Surge Arrester (Terminal connector suitable for ACSR Panther on the Outdoor cable termination to connect cable end termination to ACSR panther Line) |
| 145 | Line differential cum distance-Numerical relay with optical interface and accessories |
| 146 | OLTE equipments consisting of Fully Wired Cabinet with base 19\\" equipment rack with Control, Synchronisation, Alarm & Power supply cables- 1 No.;Central Processing Card - CPU- 2 Nos.;Power supply unit -48VDC- 2 Nos.;OLTE - 4 Port STM-1(155 Mbps Card)- 1 No.;SFP Duplex LC Connector for OLTE Card- 4 Nos.;OFC Patch Cords - 20 m- 8 Nos.;8 Port 2w/4w E&M Interface Card- 1 No.;4 Port Data Interface Card- 1 No.;4 Port Ethernet Card- 1 No.;4 Command Integrated Teleprotection Card- 1 No.;Line Differential relay interface card (min 2 ports)- 1 No.;Engineering Order Wire Phone- 1 No.;Laptop (Core i3 processor family,3.1 GHz & above, 15.0\\" LED, 1TB HDD, 4 GB RAM, DVD R/W) with configuration Software for all OLTE Terminals/ Equipments with preloaded licensed Microsoft Windows 10 OS as offered- 1 No. |
| 147 | Any Other item required for successful completion of work |
| 148 | Note: * Quantity indicated is for evaluation purpose. Actual quantity to be supplied after getting approval. |
| 149 | Details Survey as per tenrative route Which includes the following majar activities- Pegging of line route, providing of servey pillar at an interval of 3-4 Km in the line route with required jungle clearance for survey, Profile preparation of approved route on graph sheet and marking of offset on eighter side of line, marking of side clearance for hills, sand dunes etc. as per specification and tower scheduling. |
| 150 | Check survey as per approved route of line which includes-Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site. |
| 151 | Land Compensation |
| 152 | Identification of Land, RoW Corridor marking, land owner identification, and area measurement as per Annexure-A and GoR notifications |
| 153 | Documentation and preparation of land compensation cases including DLC rates collection as per Annexure-A and GoR notifications |
| 154 | Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming and watering as per specification. |
| 155 | (i) Towers including extension upto 9Meters |
| 156 | EARTHING |
| 157 | Earthing of towers with pipe type earthing excluding the supply of Pipes, wires, flates& connectors, but including coke / charcoal, etc. excavation, augering, and backfilling in all types of soil. |
| 158 | ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint |
| 159 | Erection of tower (with extension upto 9 Meters) |
| 160 | Conductor Stringing: Stringing of ACSR panther conductor including hoisting of insulator string, laying, jointing & tensiong of conductor, clamping with armour rods and fixing of vibration damper per route KM of the line. |
| 161 | 3 Conductor for S/C Line |
| 162 | OPGW Stringing |
| 163 | Installation Hardware set for above 24 Fibre OPGW Cabling including of all cable fittings and accessories exept Joint box |
| 164 | Joint Box (24 FIBER) OPGW Cable |
| 165 | OPGW Re-Stringing |
| 166 | Restringing of 24 Fiber (DWSM) OPGW Fiber Optic Cable, re-Installation Hardware set for 24 Fibre OPGW Optic Cabling including of all cable fittings and accessories exept Joint box |
| 167 | RESTRINGING OF CONDUCTOR/EARTH WIRE |
| 168 | (A) Restringing of ACSR Panther conductor:-Dismantling of vibration dampers and armour rods, fitting in rollers, de-tensioning, holding & lowering of conductor, de-hoisting of insulator string as required, adding/ removing and jointing of conductor, hoisting of insulator string, lifting of conductinto rollers and re-tensioning, jointing, fitting of armour rods and vibration dampers and clamping per route KM of the line section to be restrung dismantled material not re-used to be deposited in our stores & stacked. |
| 169 | (I) 3 conductor for S/C Line |
| 170 | Dismantaling of Towers : Dismanteling of Superstructures alongwith extensions having tack welded bolts & nuts, including removal of D Shackles, hengers, U Bolts, step Bolts, ACD, Danger Plate, Number Plate, Phase Plate of tower including transportation from site to our store and stacking of all material |
| 171 | 132kV S/C & D/C Towers |
| 172 | Sub Station Structures |
| 173 | DESTRINGING OF CONDUCTOR- De-stringing up to ACSR Panther Conductor, Dismanteling of vibration dampers and armour rods, removal of conductor from clamps and fitting in rollers, removal of conductor from clamps and fittings in roller, detensioning, dehoisting of insulator string as required and collecting the material & depositing the same in our store |
| 174 | Single Conductor |
| 175 | Destringing of OPGW : |
| 176 | De-Stringing of 24 Fibre (DWSM) OPGW Fibre Optic cable |
| 177 | Excavation:- Excavation, excluding back filling, including shoring, shuttering, dewatering etc. upto the required depth as per foundation specification / drawings. |
| 178 | (i) Any soil soft rock other than Hard rock |
| 179 | (ii) Hard Rock |
| 180 | CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings. |
| 181 | 1:3:6 Mix |
| 182 | 1:1.5:3 Mix |
| 183 | Steel Reinforcement |
| 184 | Supply, Cutting, bending, welding of joints if required, fixing and placing of steel reinforcement as per specification and drawings including material. |
| 185 | CABLE INSTALLATION WORK |
| 186 | Detailed Survey |
| 187 | Surveying of cable route, excavation of trial holes as per field requirement, preparation of cable route profile, drawing of cable laying, final route alignment marking lines and grades/ preparation of final cable route drawing after approval and preparing bill of materials for complete route shown in drawing i.e. between terminal towers |
| 188 | Evaluation of thermal resistivity of soil along cable route (as per technical specification) |
| 189 | Handling, Transportation to site and laying of 132 kV, Single Core, 630 Sq. mm XLPE Copper Cable as per foregoing specification requirements |
| 190 | Handling and making of straight through joints for 132 KV single core 630 Sq mm power cable(XLPE Copper cable) as per specification |
| 191 | Establishing of single ckts. (3 Nos.+ 1 Spare) 132 KV single core, 630 sq. mm copper cable in trifoil formation alongwith pilot fiber cable, providing of warning tap tagging fixing, pipes for drain and gate crossing as per drawings and specifications in trench by pulling, drawing, etc. including cable, using stendard cable installation equipements and as per direction of the engineer incharge and returning of unused items at store |
| 192 | Handling and making of outdoor type cable end terminations for 132 kV single core power cable as per specification |
| 193 | Erection of Galvanized Steel Supporting Structures/ arrangement, gentry structure, ladders etc along-with clamps, connectors, nut-bolts, washers, foundation bolts etc. for suitable and safe termination of XLPE cable from terminal towers maintaining statutory clearances and safety as per IE rules for each phase. (Structure to mount link boxes, cable end termination and surge arrester for each phase) |
| 194 | Erection of solid bonding Link box with Link plates, bonding & grounding cable complete with other associated accessories for 1-phase. |
| 195 | Earthing Material including cast iron pipes with suitable clamps, charcoal, common salt etc. complete set for each Cable Circuit( 3Nos. + 1 Spare) |
| 196 | Installation of Terminal connector suitable for ACSR Panther to connect cable end termination to ACSR panther Line. |
| 197 | Installation of of underground Optical fiber cable and associated accessories/ items as per specification along-with XLPE cable and termination at the both ends |
| 198 | Retrofitting of protection relays (Line differential cum distance numerical relay with optical interface) and accessories |
| 199 | Installation of OLTE equipments consisting of Fully Wired Cabinet with base 19\\" equipment rack with Control, Synchronisation, Alarm & Power supply cables- 1 No.;Central Processing Card - CPU- 2 Nos.;Power supply unit -48VDC- 2 Nos.;OLTE - 4 Port STM-1(155 Mbps Card)- 1 No.;SFP Duplex LC Connector for OLTE Card- 4 Nos.;OFC Patch Cords - 20 m- 8 Nos.;8 Port 2w/4w E&M Interface Card- 1 No.;4 Port Data Interface Card- 1 No.;4 Port Ethernet Card- 1 No.;4 Command Integrated Teleprotection Card- 1 No.;Line Differential relay interface card (min 2 ports)- 1 No.;Engineering Order Wire Phone- 1 No.;Laptop (Core i3 processor family,3.1 GHz & above, 15.0\\" LED, 1TB HDD, 4 GB RAM, DVD R/W) with configuration Software for all OLTE Terminals/ Equipments with preloaded licensed Microsoft Windows 10 OS as offered- 1 No |
| 200 | Installation of 132KV Class of 120KV rating Surge Arrester with grading ring,discharge counter with Mili meter |
| 201 | Charges for conducting pre-commissioning tests as per specification and successful commissioning of circuits |
| 202 | Civil Works |
| 203 | Cutting Black Bitumen surface up-to any depth including all layers of crust for laying Power Cables etc, staking of useful material and disposal of surplus debris including all leads including barricading, providing danger board/diversion board, lighting, reflectors etc. |
| 204 | Earth work in excavation for buried cable trenches/foundations including dressing of sides and ramming of bottoms, lift up to 2.5 mtr. including taking out the excavated soil & backfilling of jhiri with watering & ramming , timbering & shoring ( wherever required ) disposal of surplus excavated soil as directed with all lead and lift including barricading, providing danger board/diversion board, lighting, reflectors etc.(Any Soil other than hard rock) |
| 205 | Providing and laying of Cement concrete including curing, etc using stone aggregate 40 mm nominal size (crusher broken) in foundation plinth, excluding the cost of shuttering using 1 cement: 4 sand: 8 stone aggregate (For equipment foundation, junction box etc.) |
| 206 | P&L cement concrete in R.C.C. work in foundation ,rafts, footings, strap beams ,bases of columns etc., including curing ,compaction, finishing with rendering in cement sand mortar 1:3 (1cement :3 sand) and making good the joints , excl., the cost of centring and shuttering and reinforcement :M-20 grade mix 1:1.5:3 (1cement:1.5coarse sand : 3 graded stone aggregate 20 mm nominal size (For equipment foundation, junction box , culvert etc.) |
| 207 | Providing & Fixing of steel fabrication made of angles, tees, square bars or other flats black pipe with hold fast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 208 | Providing & fixing of reinforced ferro cement cable trench covers designed for A & AA loading duly marked on cover with adequate reinforcement having thickness 75 mm to 100 mm anti corrosive bitumen painted MS plate Rim and MS lifting hooks admixtures like plasticizer bond -improving compound shrinkage resistance compound abrasion resistant complete as per approved design(for cable joint box )(for any span) |
| 209 | Providing & Laying HDPE pipe heavy duty of approved make jointed with solvent cement |
| 210 | 250mmdia.(for 3 phase formation) |
| 211 | (ii) HDPE PLB Duct for Optical Fiber Cable |
| 212 | Supply and laying inter locking RCC cable covers as per approved drawing |
| 213 | Supply, spreading of clean river sand in the cable trench and cable joint pit as per specification. |
| 214 | Providing & Fixing Cable Route Marker along the route of cable at the spacing of 50 meter etc. as per drawing and site requirement. |
| 215 | RR Stone masonary in F/P CSM 1:4 |
| 216 | Plastering 20mm thickness CSM 1:6 |
| 217 | Providing and laying plane cement concrete M20 grade |
| 218 | Providing and fabricating steel reinforcement for R.C.C. work bending ,placing in position and binding complete including cost of binding wire in foundation ,raft footing ,strap beams base of column etc., up to plinth level hot rolled deformed (I.S.1139) cold twisted (I.S.1786)bars (For equipment foundation, junction box \ etc.) |
| 219 | Centring and shuttering with plywood or steel plates including strutting, propping bracing both ways with wooden members and removal of formwork for superstructure up to 4.5m height above plinth level for (For equipment foundation, junction box etc.) |
| 220 | Any Other item required for successful completion of work |
| 221 | Note: * Quantity indicated is for evaluation purpose. Actual quantity to be supplied after getting aproval.++One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW/Approach Fibre Optic cable. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender