Tender For Special Repair Of Diso Simulator & Unit Hq Building At 2 annual maintenance At Afa Hyd
Tender Value
48.74 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
18 days left
EMD
97484
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Diso Simulator & Unit Hq Building At 2 annual maintenance At Afa Hyd
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 2 | Demolition of Plain cement concrete (un reinforced) in ground floors and pavings (below or above ground level) complete all as specified and directed. |
| 3 | M&L Loose filling with aggregates of gauge 80 to 150 mm in graded stone aggregate for flooring, in trenches complete all as specified and directed by Engr-in-Charge |
| 4 | M&L 75mm thick PCC 1:4:8 type D2 using 20mm graded stone aggregate for flooring, Hardstanding, Pavings surface finished fair and even complete all as specified and directed. |
| 5 | M&L for Chequered cement concrete coloured tiles 30cm x30cm x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed in cement mortar 1:6 including demolition of old tiles all as specified and directed by Engr-in-Charge. |
| 6 | S & F 8-9 mm thick Glazed Vitrified coloured tiles Light shade, double charged / ultra charged matt finish / non-skid as approved, area of each tile exc 0.42 sqm but not exc 1.00 Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors spacer (3 to 4 mm) including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as directed. |
| 7 | S & F 8-9 mm thick Glazed Vitrified coloured tiles Light shade, double charged / ultra charged as approved, area of each tile exc 0.42 sqm but not exc 1.00 Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces as in skirting / dado including rendering / screed layer 10 mm thick in cement mortar 1:4 complete adspacer (3 to 4 mm) all as specified and directed. |
| 8 | M&L 18 - 20 mm thick Granite as in counter top wash basins including moulding edgs, cuting to required shape and size finishing etc,with fixed cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 9 | M&L Rounding to edges of stone slabs to one edge, such as in steps and other similar situations |
| 10 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material outside premises to a distance exceeding 1.5 K but not exceeding 5 Km complete all as specified and directed.. |
| 11 | M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete. |
| 12 | Demolition of reinforced cement concrete of any description , any grade and in any position including reinforcement cut as required to facilitate demolition as in water tanks including base beams, shelves, platforms etc complete all as specified and directed. |
| 13 | M&L for Precast reinforced cement concrete 1:2:4 mix, type B-1 using 20 mm graded stone aggregate as in slabs supported on walls, as in platforms, shelves etc all as specified and directed. |
| 14 | M&L for steel reinforcement TMT bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 15 | M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with liquid water proofing compound surface finished even and smooth without using extra cement complete all as specified. Note-Liquid water proofing compound will be measured and paid separately |
| 16 | S&F Liquid water proofing compound complete all as specified and as directed. |
| 17 | Taking down Chowkhats or frames exc. 1.5 sq m. but n exc 4 sq.m each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 18 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 19 | S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineering- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 20 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | S&F of extruded 100mm Aluminium alloy B-22 butt hinges, with galvanised mild steel hinge pin, complete all as specified. |
| 22 | S&F of 150mm Aluminum anodised barrel tower bolts of extruded section complete all as specified. |
| 23 | S&F of 150mm extruded aluminium anodised alloy handles fabricated type complete all as specified. |
| 24 | S&F 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified. |
| 25 | Taking up or down steel tubing 15 mm and connections, including cleaning for refixing or removal to store etc complete all as directed. |
| 26 | Taking up or down steel tubing 20 mm and connections, including cleaning for refixing or removal to store etc complete all as directed. |
| 27 | Taking up or down steel tubing 25 mm or 32 mm and connections, including cleaning for refixing or removal to store etc complete all as directed. |
| 28 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including cutting grooves/ holes in brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and directed. |
| 29 | Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including cutting grooves/ holes in brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and directed. |
| 30 | Supplying and laying of 32 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including cutting grooves/ holes in brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and directed. |
| 31 | S&F of 1000 lit capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old exting tank complete all as specified and directed. |
| 32 | S&F of 25 mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified and directed (Minimum weight 15 mm - 142 Gms) |
| 33 | S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends suitable for CPVC pipe incuding connecting socket all as specified and directed. |
| 34 | S&F in repairs vitreous china table top wash hand basin size not less than 450mm x 300mm with 32/40 mm dia waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 35 | S&F in repairs 32/40 mm dia brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing union and cap and 32 mm dia PVC flexiable waste pipe complete all as spsecified and directed. |
| 36 | S&F Vitreous china premium/ 1st quality wash down water closet cascade type EWC white/ ivory / off white (closed pattern incl all necessary accessories like rag bolts/ seat cover, in built flushing cistern with accessories, complete in all respect all as specified. |
| 37 | S&F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, 32 mm bore waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), fixing flush pipe, grating and Union for discharge pipe all as specified and directed. |
| 38 | S&F in repairs Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed. |
| 39 | S&F of stop valves/angle cock 15mm dia cast copper alloy fancy type CP screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, of 15mm bore etc complete. |
| 40 | S&F Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and directed. |
| 41 | S&F 15 mm pillar taps fancy type with long bend cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed. |
| 42 | S&F in repair Brass Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 43 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 44 | S&F 15 mm bore Two way Bib taps chromium plated fancy type , cast copper alloy with crutch or butterfly handle, screwed down, screwed for CPVC pipe 20 mm outer dia including suitable connector socket all as specified. |
| 45 | S & F in PVC connections 15mm size with PTMT nuts of length 450mm. |
| 46 | S&F of 5mm thick looking mirror of selected quality glass, mounted on 12 mm thick pvc sheet and fixed with wooden plugs and chromium plated screws including necessary joining cleats, glazing clips, rubber packing with anodised aluminium beading etc complete all as specified. |
| 47 | S & F in repair PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls / floor incl taking down old pipes of any description and cutting holes as required and making good disturbed portion after fixing of pipes etc. complete all as specified and as directed. |
| 48 | S & F in repair PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls / floor incl taking down old pipes of any description and cutting holes as required and making good disturbed portion after fixing of pipes etc. complete all as specified and as directed |
| 49 | S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed |
| 50 | S & F in repairs PVC (SWR) bend of 75 mm dia . |
| 51 | S&F in repairs 110mm bore PVC SWR bend of 110 mm dia. |
| 52 | S&F in repairs 110mm bore PVC SWR bend with acces door complete all as specified |
| 53 | S&F in repairs 110mm bore PVC SWR branch piece single 'Y' equal or unequal |
| 54 | S&F in repairs 110mm bore PVC SWR junction single (single T) equal or unequal |
| 55 | S&F in repairs PVC (SWR) 110 mm dia Vent cowl |
| 56 | S&F in repairs 75mm bore PVC SWR junction single (single T) equal or unequal |
| 57 | M&L in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed. |
| 58 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 59 | S&F of Toilet paper holder with flat recessed type brass, chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 60 | S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 61 | S&F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified (Powder coating should not be less than 50 micron) |
| 62 | S & F powder coated aluminium windows and ventilator shutters, sliding type, without sash bars aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips , rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as rollers, locking arrangement, handles etc complete all as specified. (Powder coating should not be less than 50 micron) |
| 63 | S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm and in aluminium frames in each pane complete all as specified and as directed. |
| 64 | S&F 4mm thick Figured glass, pin head type and glazing fixed in aluminium frames with rubber beading/gasket in squares n exc 0.5 sq. m in each pane complete all as specified. |
| 65 | S & F in repair 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with nails complete all as specified and directed |
| 66 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples |
| 67 | M&L for 5 mm thick Rendering on concrete surfaces of ceilings surface finished even and smooth with out using extra cememt complete all as specified and directed. |
| 68 | M&L for preparation of newly plastered surfaces of ceilings and applying two coats of distemper oil emulsion over one coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and as directed. |
| 69 | M&L for complete removal of the existing treatment of any type on walls and applying a coat of alkali resistant priming paint followed by applying 2mm thick wall care putty and making the surfaces smooth and even with sand paper and finally applying two coats of oil distemper complete all as specified and as directed . |
| 70 | Dismantling wall and ceiling boards( fibre, pulp,insulation,etc) or insulation boards/slabs/blankets, any thickness,including cover fillets , aluminium frame work etc of any description complete all as specified and as directed by Engr-in-charge |
| 71 | Providing and fixing of eco-friendly light weight calcium silicate acoustical false ceiling tiles in module size of 600x600mm G.I. powder coated 24mm T grid system.Eco friendly light weight calcium silicate tiles shall be made of non-cementitious hydrated wet molded calcium silicate slurry, reinforced with fibers and natural fillers. Free from formaldehyde and other harmful materials. Does not contain any toxic ingredients. Tiles shall be GRIHA accredited product suitable for green building applications.False ceiling tiles shall have followingproperties:(a).Dimension of tiles: 595x595x15mm thick integral densified tegular/butt edged.(b). Thickness: 15mm thick integral densified tegular/butt edges with 26mm wide collar at all around the edge resting portion and 10mm thick at quadrant of the body size of 543x543mm.(c). Relative Humidity: 100% RH as per ASTM C 473-03.(d). Fire resistance: Non-combustible tile as per BS 476 part 4, Fire performance as per BS 476 Part 6 for fire propagation &class 1 as per BS 476 part 7 for Surface spread of flame.(e). Surface Burning Characteristics: Class 1 or Class A as per ASTM E 84 with Falme Developed Index (FDI) value 0 and Smoke Developed Index (SDI) value 5.(f). Acoustic control: Noise reduction coefficient (NRC) 0.5 - 0.75 as per IS 8225:1987. Sound Attenuation 30-32dB.(g). Thermal conductivity: 0.048 W/mK to 0.052 W/m²K as per IS 3346/1980 and asper ECBC code 2017.(h). Recycled content: shall have 46-50% recycled content.(i). Light reflectance: >85%.(j). Weight: 5-5.5kg/m2.(k). Density of material: 350 kg/m3 at the quadrant 10mm thick portion and 450 kg/m3 at all around the integral densified edges. (Average density 370 kg/m3 as perECBC code 2017).(l). Surface: All tiles are prime coated onboth sides. Standard factory finish in two coats whitedispersion type, solvent free paint. |
| 72 | False ceiling tiles to be laid in true horizontal level suspended on inter locking metal T grid hot dipped galvanized iron sections of 0.33mm sheet of thickness galvanized @ 120 grams per sqm including both sides comprising of main T runners of size 24x38mm of length 3000mm, cross T of size 24x32mm of length 1200mm and secondary intermediate cross T of size 24x32mm of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Galvanized iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall becarried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 73 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 74 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engr-in-charge |
| 75 | M&L for 75mm thick plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed . |
| 76 | M & L for preparing old painted steel and iron surfaces of any description, not otherwise described 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge. |
| 77 | M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge. |
| 78 | Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. incl necessary painting / distempering, white-washing etc. incl making good the disturbed surfaces & matching to the existing surfaces complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge & to the entire satisfaction of the Engr-in-Charge. |
| 79 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. incl necessary painting / distempering, white-washing etc. incl making good the disturbed surfaces & matching to the existing surfaces complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge & to the entire satisfaction of the Engr-in-Charge. |
| 80 | Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. incl making good the disturbed surfaces & matching to the existing surfaces complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge by Engr-in-Charge. NOTE for Item Nos 77 to 79 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates. |
| 81 | M & L for point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade), ISI marked with all fittings and accessories, PVC Clamps etc. ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) & incl fixing of Modular Metal flush boxes, Modular White Cover Plates with frames of appropriate size & thickness fixed flush to wall or in chases (as applicable / directed) for mounting switch, sockets etc. & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex/KEI, Make of Conduit : Precision/Finolex/Polycab/Modi |
| 82 | (a) One Light/E/Fan/W/Fan etc. point controlled by one switch 5/6 Amps. |
| 83 | (b) One C/fan point controlled by one switch 5/6 Amps. |
| 84 | (c) One switch socket outlet point 5/6 Amps on independent board. |
| 85 | (d) One switch socket outlet point 5/6 Amps on same board. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
| 86 | (d) One switch socket outlet point 5/6 Amps on same board. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender