Tender For Repair/ Maintenance Road Side Footpath, Shoulders, Berms At Namkum And Khojatoli, Repair Of Electric Geysers, Feeder Pillars Boxes & Control Accessories, Ceilings Fan/ Exhaust Fan At Mh Namkum, Lt Panel At Khojatoli Under Ge Ranchi
Tender Value
36 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
72000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Road Side Footpath, Shoulders, Berms At Namkum And Khojatoli, Repair Of Electric Geysers, Feeder Pillars Boxes & Control Accessories, Ceilings Fan/ Exhaust Fan At Mh Namkum, Lt Panel At Khojatoli Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Demoliton of cement concrete in ground floor paving exc 15cm thickness ( below or above ground level ) complete. |
| 2 | M&L for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete including all as specified & as directed. |
| 3 | Material & labour for 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified & directed. |
| 4 | M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete. |
| 5 | Dismantling of Stone sett paving laid dry and dry pointing of any description or thickness |
| 6 | Providing and laying 60mm machine pressed precast concrete interlocking paver block with grey cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade |
| 7 | Providing and laying 80mm Machine pressed precast concrete interlocking paver block with Grey Cement any shape and size confirming to IS 15658-2006of 80 mm thickness M-40 Grade |
| 8 | M&L Sand filling under floors or in foundations including watering and consolidation |
| 9 | M & L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in copping and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 10 | Servicing to LT panels/Feeder pillar boxes comprising MCCBs/change over switches metering eqpt etc. as incomming/outgoing controls including cleaning, greasing the hinges, locking arrangement, checking the seviceability of individual items, identification of the defective parts replacing the wornout fastners, insulators, rubber door beadings, gakets etc all as directed Note:- (1) Unserviceable parts replaced if any shall be measured & paid seperately under respective items. |
| 11 | Removing the existing hinges by cutting and supply and fixing of new hinges all as per existing size |
| 12 | Painting of LT panel board/feeder pillar boxes with two coats of synthetic enamel spray paints over a coat of red oxide primer matching existing colour after scrapping the old paint by means of emery paper and cleaning with thinner including necessary markings/sign writing etc complete all as specified and directed. |
| 13 | Rewiring the LT cubical type panel by means of PVC insulated multi strandard copper wire of existing size including replacing unserviceable connectors, fastners etc,after taking out the old unserviceable wiring all as directed. |
| 14 | Material and labour for replacement of LED type indicator lamp (RYB) (Set of three) complete all as specified. |
| 15 | Supply and Fixing in replacement of Digital Amp Meter 0-250 Amp with including making electric connection by suitable size of multistranded copper conductor with thimbles complete all as specified. |
| 16 | Supply and Fixing in replacement of Digital Volt Meter 0-500 V including making electric connection by suitable size of multistranded copper conductor with thimbles complete all as specified. |
| 17 | Supply and fix Indoor resin cast ring type low tension current transformer 50/5A to 75/5A 15VA burden accuracy class 1 confirming to IS 2705 /1992 |
| 18 | Supply and fix Indoor resin cast ring type low tension current transformer 100/5A to 300/5A 15VA burden accuracy class 1 confirming to IS 2705 /1992 |
| 19 | Supply and Fixing in replacement MCCB 4 Pole, 415 V, fixed type, 63 Amps with breaking capacity 16 KA |
| 20 | Supply and Fixing in replacement MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA |
| 21 | Supply and Fixing in replacement MCCB 4 Pole, 415 V, fixed type, 125 Amps with breaking capacity 25 KA |
| 22 | Supply and Fixing in replacement MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 25 KA |
| 23 | Supply and Fixing in replacement MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA |
| 24 | Supply and Fixing in replacement MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA |
| 25 | Supply and Fixing in replacement MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA |
| 26 | Material and labour plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate for foundations / filling around the post, Poles etc complete all as specified and as directed. |
| 27 | Supply & fix in replacement for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge plate not less than 1.5 metre below normal ground level connected to galvanized earth strip of size 25 x 4 mm as earthing lead by means of bolts, nuts, chuck nuts and washers of galvanized iron earth lead with 15 cm thick alternate layers of charcoal dust & common salt including PCC pit in PCC 1:2:4 type B-1, RCC cover made out of cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with TMT steel bars 8 mm dia @150 mm c/c both ways with suitable handle and angle iron 40x40x5mm frame, GI medium grade watering pipe 20 mm bore and funnel with wire mesh light grade protection pipe 40 mm bore up to main board complete as shown on electrical plate No 3 of MES Sch 2009 (Part-I) and testing on completion complete all as specified and directed by Engr-in-Charge. Note: - (i)On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction of Engineer-in-charge.(ii) Item includes the cost of 7.5 m GI pipe for protection of earth strip. (iii) PCC pits extra cost of addtional length of watering pipe, bends elbows etc.shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length copper earth strip 25x4 mm. |
| 28 | Material and labour for GI earth strip of size 25 x4mm in ground not exceeding 40cm deep / fixing to wall / structure including taking down old strip complete all as specified and as directed. |
| 29 | Material and labour for GI earth strip of size 20 x 3mm in ground not exceeding 40cm deep / fixing to wall / structure including taking down old strip complete all as specified and as directed. |
| 30 | Supply and installation, testing and commissioning in replacement of of Bus bar box out door type totally enclosed dust and vermin proof floor mounting with hinged doors and locking arrangement front and back fabricated out of 3.15 mm thick CRCA sheet CPRI approved test type make including powder coated paint finish including all accessories, provision independent removevable MS plates for fixing cable glands for all incomming and out going cables and complete control wiring with 2.5 sqmm copper conductor incuding necessary PCC foundation complete all specified. Note :- (1) Rates deemed to be included for suitable lugs and glands for incoming and out going of LT UG cable.(2) The Contractor Shall submit the drawing with sample of accessories for approval before executing the work. (a) Main incoming 125 Amps MCCB 04 pole, 25 KA - 01 nos (ICS=100%ICU)(b) Electrolytic grade aluminium bus bar 200A rating for 3 phase and neutral including PVC colour coded sleves. - 01 Set(c) LED lamps for R,Y,B Phase indication with control fuse/MCB - 01Set(c ) Volt meter digital type 96 sqmm with selector switch - 01 set(d) Amps meter digital type 96 sqmm with CT's 150/5 -03 Nos and selector switch - 01 Set(e) Insulators, wiring, bus bar sleeves, lugs, gland, sheet metal enclosure etc including complete wiring with suitable size of copper wire |
| 31 | Supply and installation testing and commissioning LT Panel out door type, manufactured by CPRI approved manfacturers, water and vermin proof protection of minimum size 1500mm x 1200mm x 500 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces and confirmig to IP-54 and the dimension of the outer shell should be adequate to accommodate inner shell giving minimum 75mm space all around and necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation extending 600mm above the GL suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment supplied fitted and connected internally complete with bus bar with other accessories all as specified and as directed and including taking down old unsv/Damaged LT panels (Note: The Contractor shall submit the drawings with sample of accessories for approal before executing the work).(a) Copper strip busbar of 600 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos with compatible CTs, Digital ammeter and volt meter with selector switches , set of LED type, indicating lamps R,Y,B on incoming side.(b) MCCB 4 pole, 415 volt adjustable thermal magnetic release type 400 Amps with breaking capacity 36 KA- 01 No (Incoming ) (ICS=100%ICU)(c) MCCB 4 pole 415 volt adjustable thermal magnetic release type 250 Amps with breaking capacity 25 KA-01Nos (outgoing) (ICS=100%ICU)MCCB 4 pole 415 volt adjustable thermal magnetic release type 160 Amps with breaking capacity 25 KA-02 Nos (outgoing) (ICS=100%ICU)(d) TPN 63A MCB -01 |
| 32 | Supply and spreading stone aggregate of size not exceeding 40 mm spread and leveled in layers not exceeding 15 cm to a true surface of broken stones for LT panel and including cleaning away all grass, vegetation, saplings, shrubs, undergrowth, area complete all as specified and directed. Please Enable Macros to View BoQ information |
| 33 | Supply and spreading stone aggregate of size not exceeding 40 mm spread and leveled in layers not exceeding 15 cm to a true surface of broken stones for LT panel and including cleaning away all grass, vegetation, saplings, shrubs, undergrowth, area complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender