Tender For Installation Of Gym And Renovation Of Park In Ward No 15 Model Town Kalayat
Tender Value
12.36 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
6 days left
EMD
26000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kaithal → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Gym And Renovation Of Park In Ward No 15 Model Town Kalayat
BOQ
| Sl. No. | Item Description |
| 1 | Chain Swing double Supply and fixing of Chain Swing double of made of 14 gauge MS sheet, area 4m x 4m, chain thickness 6-8MM, main cross bar 50mm pipe, Cross Bar 40mm NB pipe, Seat belts type, length 3Meter, height 2.40 Meter, bearing bush type or ball bearing capacity 2children. The supplier must confirm the quality standard such as DIN and EN. The Equipment supplier must have ISO 45001 certification for Health and Safety Management System and for Quality standard manufacturing unit must have ISO 9001 certification. Al sizes plus -5% variations will be accepted. |
| 2 | Double Sea-Saw Supplying and fixing of double Sea-Saw of made of 14 gauge MS sheet, Total height 3feet, main frame 50mm NB pipe, plank 40mm NB pipe, spot 20mm NB pipe, seat 14 gauge MS sheet capacity 4 children. The supplier must confirm the quality standard such as DIN and EN. The Equipment supplier must have ISO 45001 certification for Health and Safety Management System and for Quality standard manufacturing unit must have ISO 9001 certification. Al sizes †-5%variations will be accepted. |
| 3 | Wide Slide Rec. Age: 4to 12 yrs., MS sheet: 14 gauge Platform: chequered SheetLadder 25 MM N.B Pipe Center Support 40 MM N.B 2 Nos. Pipe Handles 20 MM N.B. Pipe or rectangular tube. Slide Chute M.S. Height andlength: 1.20 mts. × 2.40 mts. 1.50mts. X3.05 mts. The supplier must confirm the quality standard such as DIN and EN. The Equipment supplier must have ISO 45001 certification for Health and Safety Management System and for Quality standard manufacturing unit must have ISO 9001 certification. Al sizes plus 5% variations will be accepted |
| 4 | Revolving Six chair Platform Revolving seat Square Pipe 2x1 inch, revolving total platform Area 3m x 3m, total height 3 feet, dia 1.5 meter, main frame material 3x1.5 inch square pipe, , handles 25mm NB pipe, bearing heavy duty taper roller assembly capacity to 6 children. The supplier must confirm the quality standard such as DIN and EN. The Equipment supplier must have ISO 45001 certification for Health and Safety Management System and for Quality standard manufacturing unit must have ISO 9001 certification. Al sizes plus 5-% variations wil be accepted. |
| 5 | Arm Wheel:- Providing designing and fixing Arm Wheel in a pair of size 850X800X1800 mm fabricated with main post of 114 mm dia and 3.00 mm thick amd other pipes of 40 mm dia 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 mmicron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing, Handle bars to be provided with high quality grip rubber. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastice 4.00 mm colorful and U V resistant environmental friendly. Bearing used shall be maintance free duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge Equipment to be fited within built limiters to prevent unwanted movement. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge material, shape of equipment colour on metal, seat and bse cover plate and fixing of equipment etc. |
| 6 | Air Walker:- Providing desining and fixing of Air-Walker of size 100X550X1480 mm fabricated with main post of 114 mm dia and 3.00 mm thick and other pipes of 40 mm dia 3.00 thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints prior to finishing. Base plate cover shall be made up of virgin LLDE plastic by rotational moulding with minimum 4.00 mm thickness UV resistant environmental friendly. Bearing used shall be maintance free duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge Equipment to be fited within built limiters to prevent unwanted movement. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge material, shape of equipment colour on metal, seat and bse cover plate and fixing of equipment etc. |
| 7 | Air Swing:- Providing desining and fixing of Airs-Walker of size 1150X900X1250 mm fabricated with main post of 114 mm dia and 3.00 mm thick and other pipes of 40 mm dia 3.00 thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour.Base plate cover shall be made up of virgin LLDE plastic by rotational moulding with minimum 4.00 mm thickness UV resistant environmental friendly. Bearing used shall be maintance free duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge Equipment to be fited within built limiters to prevent unwanted movement. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge material, shape of equipment colour on metal, seat and bse cover plate and fixing of equipment etc. |
| 8 | Pull Chair:- Providing designing and fixing of pull pair of size 2500X800X2000 mm fabricated with main post 114 mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coted using Akzo Nobel or equivalent in desired shade and colour.Base plate cover shall be made up of virgin LLDE plastic by rotational moulding with minimum 4.00 mm thickness UV resistant environmental friendly. Bearing used shall be maintance free duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge Equipment to be fited within built limiters to prevent unwanted movement. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge material, shape of equipment colour on metal, seat and bse cover plate and fixing of equipment etc. |
| 9 | Double Cross Walker:- Proper designing and fixing Double Walker of size 1600X600X1600 mm fabricated with main post of 114 mm dia and 3.00 mm thick and other pipes of 40 mm dia 3.00 mm thick all pipes up of hot rolled tubular steel and hot dipped galvanized, and power coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints sclloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastice 4.00 mm colorful and U V resistant environmental friendly. Bearing used shall be maintance free duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge Equipment to be fited within built limiters to prevent unwanted movement. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge material, shape of equipment colour on metal, seat and bse cover plate and fixing of equipment etc. |
| 10 | Sit Up Station:- Providing, designing and fixing of horse rider station of size 1500X1150X650 mm fabricated with main post of 114 mm dia and 3.00 mm thick and other pipes of 40 mm dia 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and power coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints sclloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastice 4.00 mm colorful and U V resistant environmental friendly. Bearing used shall be maintance free duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge Equipment to be fited within built limiters to prevent unwanted movement. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge material, shape of equipment colour on metal, seat and bse cover plate and fixing of equipment etc. |
| 11 | Leg Press:- Providing designing and fixing of stair stepper in a combination of pair and a single step of size 2000X550X1600 mm fabricated with main post of 114 mm dia and 3.00 mm fabricated with main post of 114mm dia and 3,00 mm thick and other pipes of 40 mm dia 3,00 mm y=thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized, and powder coated using Akzo Nobel OR EQUIVALENT OF 80-120 Micron thick. All welding joints of pipe are robtic welded with koints scalloped necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastice 4.00 mm colorful and U V resistant environmental friendly. Bearing used shall be maintance free duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge Equipment to be fited within built limiters to prevent unwanted movement. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground concrete of minimum strength M25 and J. shaped welded bolts and once the concrete is set, fix equipment on to it and cover nuts and bolts with the base plate, All complete as per direction and approval of Enginee-in-Charge regarding material shape equipment colour on metal, seat and base cover plate and fixing of equipment etc. |
| 12 | Seated Chest Press:- Providing, designing and fixing Seated Chest of pull pair of size 1800X700X2000 mm fabricated with main post of 114 mm dia and 3.00 mm thick and other pipes of 40 mm dia 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and power coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints sclloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastice 4.00 mm colorful and U V resistant environmental friendly. Bearing used shall be maintance free duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge Equipment to be fited within built limiters to prevent unwanted movement. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge material, shape of equipment colour on metal, seat and bse cover plate and fixing of equipment etc. |
| 13 | Rowing Mchine:- Providing designing and fixing Rowing Machine of size 1280X800X1500 mm fabricated with main post 114 mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coted using Akzo Nobel or equivalent in desired shade and colour.Base plate cover shall be made up of virgin LLDE plastic by rotational moulding with minimum 4.00 mm thickness UV resistant environmental friendly. Bearing used shall be maintance free duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge Equipment to be fited within built limiters to prevent unwanted movement. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge material, shape of equipment colour on metal, seat and bse cover plate and fixing of equipment etc. |
| 14 | [10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth. [Through Rate] |
| 15 | [10.30.3]Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 3. Dark shade pigment using ordinary cement [Through Rate] |
| 16 | [11.5.4]12 mm cement plaster of mix : 4. 1:6 (1 cement: 6 fine sand) [Through Rate] |
| 17 | [11.60]Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. [Through Rate] |
| 18 | [11.67.1]Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. Water thinnable cement primer [Through Rate] |
| 19 | [11.98.1]Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 1. New work (Two or more coats applied @ 1.43 litre/ 10 sqm Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm [Through Rate] |
| 20 | [13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate] |
| 21 | [2.B0242] B0242. 150 mm dia PVC pipe [Rate] |
| 22 | [20.114.1]Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Minswitch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in all respect. 1. 10 HP Motor [Through Rate] |
| 23 | [22.161.1]Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : 1. 100 mm dia Ductile Iron Double Flanged [Through Rate] |
| 24 | [23.22.1.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.2. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. Double pole MCCB 100 to 125 Amp, 25 Ka [Through Rate] |
| 25 | [23.28.18.4]Supplying, installation, Testing and Commissioning of Smart Street light LED fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement ( ( 700ma), Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000- 4-5, Driver efficiency )85%,THD ( 10% as per IEC 61000-3-2 , P. F.=0.95, IP-66,IK-08, CRI )80 , under voltage and over voltage protection, EMI- EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy =105 and (120 lm/Watt output . LM79 and LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Smart inbuilt controller shall have following features. 1. Control and monitor LED luminaries with bi directional control (Status, Fault, Alarm, dimming level, wattage, energy) 2. to measure voltage, current, power, power factor, apparent energy, active energy, operating hours. 3. Inbuilt ambient light sensor, motion sensor based on Passive Infra Red (PIR). 4. Wi-Fi LoRA/Zigbee/Power line with Ethernet network based IOT feature as per site requirement or engineer in charge. 5. should be controlled through auto/ manual 6. Programmable level of not less than 48 different light intensity settings, 7. Inbuilt repeater and relay signals function to other controllers 4. 90 Watt [Rate] |
| 26 | [23.3.6.1]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.1. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) [Through Rate] |
| 27 | [24.2.2.2]LT CABLE 2.2. Laying of underground cable 0.75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:- 16 Sq mm to 35 sqmm 2 to 4 Core [Through Rate] |
| 28 | [24.4.15.2]STREET LIGHT 15.2. B.S.E.N. 10025 High Masts \\"Supply, installation, testing and commissioning of 16 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-ChargeThickness of Top and Bottom Section = 3 mm & 4mm (minimum)Top Dia = 150 mm and Bottom Dia = 410mmThickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)\\" [Through Rate] |
| 29 | [24.5.1.4]MISCELLANEOUS ITEMS 1.4. Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 6 sqmm [Through Rate] |
| 30 | [26.105]Providing and displaying of Areca Palm plant, having ht. 1.95 m to 2.40 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots and as per direction of the officer-in-charge. [Through Rate] |
| 31 | [26.58.2]Supply and installation of garden bench 2. Rectangular garden bench with h-shaped sides made of reinforced concrete (M30), thickness 100 mm, back height 750 mm, base width 450 mm. Back and seat shall consist of rectangular reinforced concrete planks 1500 mm x 350 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications. [Through Rate] |
| 32 | [26.7]Grassing of play grounds with doob grass including uprooting rank vegetation and weeds by digging area to a depth of 30 cm , removing all weeds and other growth with roots by forking repeatedly, ploughing and dragging with ‘swagha’ breaking of clods, removal of rubbish, dressing and supplying doob grass roots, and planting at 10 cm apart in both directions , watering weeding including supplying and spreading of farm-yard manure at the rate of 0.18 cum per 100 sqm fertilizers DAP 50 g per sqm etc and maintenance till weed free turf is formed [Through Rate] |
| 33 | [3.1.2]By Mechanical Transport including loading, unloading and stacking 2. Earth [5km] |
| 34 | [3.CA001] CA001. Good earth [Rate] |
| 35 | [34.11.1]Informatory sign board 900x600 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67-2012 1. Using retro reflective Sheeting Class C as per IRC 67 2012 [Through Rate] |
| 36 | [4.14.1]Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil. [Through Rate] |
| 37 | [4.33]Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. [Through Rate] |
| 38 | [5.45]Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. [Through Rate] |
| 39 | [6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). [Through Rate] |
| 40 | [6.3.1]Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 1. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) [Through Rate] |
| 41 | [7.22.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender