Tender For Provn Of Addn/Alteration To Bldg No T-69 (Sand Model Room) At Haws Gulmarg Under Ge 969 Ews.
Tender Value
43.59 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
87180
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Addn/Alteration To Bldg No T-69 (Sand Model Room) At Haws Gulmarg Under Ge 969 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work, PCC block masonary, stone masonry or boulder masonary built in cement mortar, complete all as specified and as directed. |
| 2 | M & L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified and as directed. |
| 3 | M&L for Cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg) as in coping including form work, complete all as specified and as directed. |
| 4 | M&L for walling of random rubble masonary uncoursed, well bonded , bedded and solidly hearted built in CM 1:4, complete all as specified and as directed. |
| 5 | M&L for extra over walling hammer dressing with mix depositing on face from straight edge held against the dressed surface n. exc 40mm dpression granite or trap stone, complete all as specified and as directed. |
| 6 | M & L for rendering 15 mm thick on stone masonary surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 finished even and smooth (without using extra cement), complete all as specified and as directed. |
| 7 | Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 8 | M & L For Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:4) and rendering is to be finished even and smooth w/o using extra cement, complete all as specified and as directed. |
| 9 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete all as specified and as directed. |
| 10 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 11 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 12 | Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and directed. |
| 13 | All as per Ser Item No 12 above but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position, complete all as specified and as directed. |
| 14 | M & L 2nd Class soft wood as in scantling, clean swan timber framed and fixed, complete all as specified and as directed. |
| 15 | All as per above Srl No 14 here-in-before but except timber, complete all as specified and as directed. |
| 16 | S&F plain fillets, square, rectangular or triangular in section using second class soft wood clean swan secured with nails exc 13 sqcm but not exc 25 sqcm in section, complete all as specified and as directed. |
| 17 | S&F plain fillets, square, rectangular or triangular in section using second class soft wood clean swan secured with nails exc 6 sqcm but not exc 13 sqcm in section, complete all as specified and as directed. |
| 18 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed. |
| 19 | S&F Softwood 2nd class Clean sawn with butt joints Eaves boards 20 mm thick, complete all as specified and as directed. |
| 20 | M&L for 9 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work on wall etc, complete all as specified and as directed. |
| 21 | M&L 2nd class soft wood \\"khatambandh (Kashmiri Art) in Ceiling/wall over 9 mm thick BWR plywood and scantling framework including comices and beading as required and applying three coats of polish after preparation of the surface, complete all as specified and as directed. |
| 22 | M&L for 9 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work on wall etc, complete all as specified and as directed. |
| 23 | S&F wooden wall panelling / ceiling with tongued & grooved joint laminated over high quality DHF 5 to 6mm thick fixed to timber frame work, complete all as specified and as directed. |
| 24 | M&L for preparation of New or previously untreated surface of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying finishing two coat of synthetic varnish, complete all as specified and as directed. |
| 25 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 26 | Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 27 | M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed. |
| 28 | M&L 75 mm thickness Cement concrete type D2, 1:4:8 (40mm graded aggregate) as in flooring, complete all as specified and as directed. |
| 29 | M & L for non skid coloured printed ceramic tile 8 to 10 mm thick ( Square /rectangular /in joint less) exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 30 | M&L for glazed ceramic tiles in vertical surface350x250x7mm/450x350x7mm mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4), complete all as specified and as directed. |
| 31 | M& L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement, complete all as specified and as directed. |
| 32 | Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit, complete all as specified and as directed. |
| 33 | All as per above item No. 32 here in before but n exc 1.5 Sqm each, complete all as specified and as directed. |
| 34 | Taking down of Shutters of any description n exc 1 sqm each, complete all as specified and as directed. |
| 35 | Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each, complete all as specified and as directed. |
| 36 | Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each and re-fixing in the same opening after easing and adjusting with existing frame or chowkat, complete all as specified and as directed. |
| 37 | S&F second class Soft wood, plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints and treating back of chowkhats etc with tar or coar black paint , complete all as specified and as directed. |
| 38 | S&F second class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 39 | S&F Plain, framed,panelled shutters thickness 35 mm of second class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed. |
| 40 | S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed , complete all as specified and as directed. |
| 41 | S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed. |
| 42 | S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 43 | S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 44 | S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 45 | S&F Aluminium handles 100 mm , cast type,anodised, complete all as specified and as directed. |
| 46 | S&F Aluminium handles 150 mm , cast type,anodised, complete all as specified and as directed. |
| 47 | S&F in repairs Rat tail mild steel (helical) door spring 300 mm long fix/welded with chowkhat, complete all as specified and as directed. |
| 48 | S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified and as directed. |
| 49 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified. |
| 50 | S&F Powder coated Anodised aluminums frame for doors, sliding windows, ventilators and with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc, complete all as specified and as directed. |
| 51 | S&F Powder coated Anodized Aluminium window and ventilators shutters, without sash bar, aluminum section weighting 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, locking arragement, Handles etc, complete all as specified and as directed. |
| 52 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed. |
| 53 | S&F Sheet glass 4 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and as directed. |
| 54 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts, complete all as specified and as directed. |
| 55 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts complete all as specified and directed.oden windows , complete all as specified and as directed. |
| 56 | S&F Door closer hydraulically regulated cost iron body designation No 1 universasl type suitable for door shuutters up to 700 mm in width and of weight not more than 35 kgs, complete all as specified and as directed. |
| 57 | S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed. |
| 58 | S&F stainless steel curtain rods of selective quality designed and colour shall be as directed by Engr-in-Charge |
| 59 | Decorative type brackets and funnal of selective quality designed and colour shall be as directed Engr-in-Charge. |
| 60 | Taking up or down 15mm bore steel water tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 61 | Taking up or down 20mm bore steel water tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 62 | S&F 15mm bore steel water tube, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 63 | S&F 20mm bore steel water tube, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors , complete all as specified and as directed. |
| 64 | S&F in repair Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 65 | S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed. |
| 66 | S&F in repairs for 15 mm bore bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule, complete all as specified and as directed. |
| 67 | S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630x450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long and trap set in with concrete, complete all as specified and as directed. |
| 68 | S&F in repairs Vitreous China Urinal, Full stall type, white including flushing cistern, flush pipe and waste pipe, complete all as specified and as directed. |
| 69 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup, complete all as specified and as directed. |
| 70 | S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings, brass, chromium plated for glazed ware basin etc with long screwed shanks and fly-nuts, flange end bedded in read lead cement and other end fixed and connection pipe etc including pedestal, complete all as specified and as directed. |
| 71 | S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed, complete all as specified and as directed. |
| 72 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cober incl provision of concrete/ white cementing and P or S trap, complete all as specified and as directed. |
| 73 | S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing, complete all as specified and as directed. |
| 74 | S&F in repairs CP health faucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connection and fixed in position completed in all respected, complete all as specified and as directed. |
| 75 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 76 | S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floor or to wall, complete all as specified and as directed. |
| 77 | S&F PVC (SWR) junction single T equal or unequal 110 mm bore, complete all as specified and as directed. |
| 78 | S&F PVC (SWR) bends 110 mm dia fixed, complete all as specified and as directed. |
| 79 | S&F PVC (SWR) vent cowl 110 mm bore fixed complete all as specified |
| 80 | S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed. |
| 81 | S&F PVC (SWR) junction single T equal or unequal 75 mm dia, complete all as specified and as directed. |
| 82 | S&F PVC (SWR) bends 75 mm dia fixed, complete all as specified and as directed. |
| 83 | S&F PVC (SWR) vent cowl 75 mm bore fixed, complete all as specified and as directed. |
| 84 | M&L for anti-freezing wire unlike the normal wire, a heating element, fireproof qulaity, works on electricity only, subject to a temperature of 80 degree C for both GI and PVC pipes of any dia, underground or upper ground. Post wiring the pipes, insulation layer of waterproof tapping (pipes, wires and insulation layer) against any exposure, works on a low electric voltage with an autocut sensor to prevent over-heating including 1.5mm wire with MCB), complete all as specified and as directed. |
| 85 | M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer, complete all as specified and as directed. |
| 86 | M&L preparation of old painted surface of wood and wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamal paint, complete all as specified and as directed. |
| 87 | M&L for preparing newly plastered surfaces of walls applying two coats of distemper oil emultion, white tinted, complete all as specified and as directed. |
| 88 | M&L for preparation of old plastered or unplastered surface of wall and applying one coat of oil bound distemper, complete all as specified and as directed. |
| 89 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 90 | M&L for preparation of old plastered or unplastered surface of wall and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete. |
| 91 | Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc |
| 92 | M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 20 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :-Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is. |
| 93 | (a) All as per above item No. 92 but One light/ceiling fan/exhaust fan point controlled by one switch |
| 94 | (b) All as per above item No.92 but One switch socket combination 5 Amps on independent board |
| 95 | (c) All as per above item No. 92 but One switch socket outlet 5 Amps on same board with other switches. |
| 96 | M&L Point wiring complete with FRLS 1100 Volts grade, 2.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 20 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 2.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is. |
| 97 | S & F in repair Ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block, complete all as specified and as directed.. |
| 98 | Supply & Fixing in repair Modular switch single pole one way 6 Amps 1 module 240 V,complete all as specified and as directed. |
| 99 | Supply & Fixing in repair Modular Socket, 6A - 2/3 pin combined 2 module 240 V,complete all as specified and as directed. |
| 100 | Supply & Fixing in repair Modular Switch socket Combination 16A, 6 pin, 3 module 240 V,complete all as specified and as directed. |
| 101 | Material and labour for white cover with frame suitable for accommodating 03 Nos module switch/socket etc, complete all as specified and as directed. |
| 102 | Material and labour for white cover with frame suitable for accommodating 04 Nos module switch/socket etc, complete all as specified and as directed. |
| 103 | Material and labour for white cover with frame suitable for accommodating 06 Nos module switch/socket etc, complete all as specified and as directed. |
| 104 | Material and labour for white cover with frame suitable for accommodating 08 Nos module switch/socket etc, complete all as specified and as directed. |
| 105 | Supply & Fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 Amp to 32 Amp, in the MCB DB Complete with connection testing and commissioning,complete all as specified and as directed. |
| 106 | Supply & Fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 32 Amp, in the MCB DB Complete with connection testing and commissioning,complete all as specified and as directed. |
| 107 | Supply & Fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of two poles and current carrying capacity 63 Amp SPN in the MCB DB complete with connection testing and commissioning,complete all as specified and as directed. |
| 108 | Supply & Fixing in repair MCB DB 12 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection,single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting,complete all as specified and as directed. |
| 109 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity TPN 100 Amp in the DB complete with connection testing and commissioning,complete all as specified and as directed. |
| 110 | Supply & Fixing in repair TPN DB 4 way sheet metal enclosure TPN 450 volts, 50 Hz, with IP-42 protection,Double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting,complete all as specified and as directed. |
| 111 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed. |
| 112 | Supply and fixing LED lights fittings 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. |
| 113 | Supply and fix SMD LED panel recess/surface/spot light 15 watt Round/square type ' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ, complete all as specified and as directed. |
| 114 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specfied and as directed. |
| 115 | M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work as Excavation, RF and removal etc. |
| 116 | S&F in repair Sub main wiring using two runs of single core PVC insulated cable with multistranded 1100 volts copper conductor of sizes 6.0 Sqmm through existing/ new in wall with PVC conduit including Copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling, complete as specified and as directed. Note: Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM make of cable.Contractor must make wall/ceiling cheasel cutting and after fixing make surface good as it is. |
| 117 | Note:- Schedule of credit Rs 64,760.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender