Tender For Special Repairs / Replacement Of 11 Nos Eot/Hot Cranes At 515 Abw Against Ber Under Ge (South) Banaglore.
Tender Value
1.70 Crore
Estimated cost
Bid Submission
16 Sep 2026
23 days left
EMD
2.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs / Replacement Of 11 Nos Eot/Hot Cranes At 515 Abw Against Ber Under Ge (South) Banaglore.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 2 | Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating G I based plain sheet steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa, 150 AZ as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 4 | All as per SI item No 3 herein before but except sheets |
| 5 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa, 150 AZ as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 6 | All as per SI item No 5 herein before but except sheets |
| 7 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250) quality- B complete all as specified and as directed. |
| 8 | Erection and fixing only Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed. Note - Taken down of old structural members shall be refxed to its original position. |
| 9 | M&L for Preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide primer complete all as specified and as directed. . |
| 10 | M&L for Preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enemel paint complete all as specified and as directed. |
| 11 | Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 13 | M&L preparation of newly plastered surfaces of wall and finishing as per following specification complete all specified and as directed :-(i) Applying 1 mm thick wall care putty & finished to smooth surfaces (ii) Applying one coat of alkali resistant primer (iii) Applying two coats of Acrylic emulsion distemper. |
| 14 | Dismantling of Electrically operated overhead travelling (EOT) Crane of capacity 5 Ton (Approx span -12.23m, Lift-10.83, Bay length -15.08m) using suitable T&P, including connecting wiring , panel etc., complete and keeping aside serviceable parts, unserviceable parts and shifting all items to E/M Store Yard using suitable transport complete all as specified and directed.(Note: Dismantling of existing roof sheets will be measured and paid seperately under respective item of this schedule |
| 15 | Dismantling of Hand operated overhead travelling (HOT) Crane of capacity 1.5 ton (2Nos) / 2 Ton (5Nos) / 5 Ton (1No) using suitable T&P, including connecting wiring, panel etc., complete and keeping aside serviceable parts, unserviceable parts and shifting of all items to E/M store Yard using suitable transport complete all as specified and directed.Note: Dismantling of existing roof sheets required for dismanting will be measured and paid seperately under respective item of work |
| 16 | M & L for Design, Manufacture, Supply, Installation, commissioning & Testing for smooth functioning of Electrically operated overhead travelling (EOT) Crane 5 Ton capacity double girder, Class IV heavy duty and conforming to IS-3177, IS 807 & structural steel component conforming to IS-2062 (latest revision) floor pendent and radio remote operated with suitable size squirrel cage induction motor S4 crane duty,40% CDF, Class F insulation controlling with micro VVVF / VFD drives based control panel and phase sequence corrector capacity 25 HP, suitable size rail track confirming to IS 3443, arrangement of DSL shrouded copper bus bar 160Amps with 4 bar (RYBG) , steel wire rope 14mm dia FMC construction 6 x 36 ungalvanised as per IS -2266, 4Nos of fall C shunk with safety latch lifting hook conforming to IS-3815 with the following specification complete all as specified & directed:- Location :- Foundary Shopa) Capacity - 5 Ton Double Girder with platform b) Span - 12.23 Mtrsc) Bay Length - 15.08 Mtrd) Hook Lift - 10.83 Mtre) Speed- 1. Hoist Speed = 3.0 Mtr/ Min 2. Cross Travel Speed = 5.0 Mtr/ Min 3. Long Travel Speed = 10.0 Mtr/ Min Contd/- Please Enable Macros to View BoQ information |
| 17 | M & L for Design, Manufacture, Supply, Installation, commissioning & Testing for smooth functioning of Electrically operated overhead travelling (EOT) Crane 5 Ton capacity double girder, Class IV heavy duty and conforming to IS-3177, IS 807 & structural steel component conforming to IS-2062 (latest revision) floor pendent and radio remote operated with suitable size squirrel cage induction motor S4 crane duty,40% CDF, Class F insulation controlling with micro VVVF / VFD drives based control panel and phase sequence corrector capacity 25 HP, suitable size rail track confirming to IS 3443, arrangement of DSL shrouded copper bus bar 160Amps with 4 bar (RYBG) , steel wire rope 14mm dia FMC construction 6 x 36 ungalvanised as per IS -2266, 4Nos of fall C shunk with safety latch lifting hook conforming to IS-3815 with the following specification complete all as specified & directed:- Location :- Foundary Shopa) Capacity - 5 Ton Double Girder with platform b) Span - 12.23 Mtrsc) Bay Length - 15.08 Mtrd) Hook Lift - 10.83 Mtre) Speed- 1. Hoist Speed = 3.0 Mtr/ Min 2. Cross Travel Speed = 5.0 Mtr/ Min 3. Long Travel Speed = 10.0 Mtr/ Min Contd/- Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender