Tender For Repair And Polishing To Wooden & Painting Of Steel Furniture At Sangrur And Nabha Under Ge (South) Patiala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Sep 2026
20 days left
EMD
34000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Polishing To Wooden & Painting Of Steel Furniture At Sangrur And Nabha Under Ge (South) Patiala
BOQ
| Sl. No. | Item Description |
| 1 | 'Notes: (i) Please refer Schedule 'A' Notes of tender documents. |
| 2 | TABLE DINNING FOR 6&8 PERS (FD-273/ FD-279)M&L for carrying out repair/replacement of following parts of Table dining for 6 pers as per drawing after removing the old unsv parts complete all as specified and directed. |
| 3 | Top using 18mm thick prelaminated particle board ISI marked and providing 6mm thick Teak beading all around. |
| 4 | Leg using Teak wood (MP Teak). |
| 5 | Long rails using Teak wood (MP Teak). |
| 6 | Short rails using Teak wood (MP Teak). |
| 7 | Stiffeners using Teak wood (MP Teak). |
| 8 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 9 | PEG TABLE (FD-384)M&L for carrying out repair/replacement of following parts of Peg Table as per drawing after removing the old parts complete all as specified and directed. |
| 10 | Top using 18mm thick prelaminated particle board ISI marked exterior grade and 6mm thick Teak edging all around. |
| 11 | Legs using Teak wood(MP Teak). |
| 12 | Long rails using Teak wood(MP Teak). |
| 13 | Short rails using Teak wood(MP Teak). |
| 14 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 15 | TABLE BED SIDE (FD/E6/MAP/15 'R')M&L for carrying out repair/ replacement of following parts of Table bed side as per drawing after removing the old unservicable parts complete all as specified and directed. |
| 16 | Top using 18mm thick prelaminated particle board to table bed side ISI marked and 6mm thick edging shall be provide all around the top all as shown on drg. |
| 17 | Both Side using 18 mm thick prelaminated particle board ISI marked and 6mm thick Teak edging all around. |
| 18 | Side of drawers using 12 mm thick comercial plywood ISI marked. |
| 19 | Bottom of drawers using 6mm thick commercial plywood. |
| 20 | Back of table using 6 mm thick plywood commercial. |
| 21 | S&F aluminum handle to drawers complete all as specified and directed. |
| 22 | S&F Hard rubber/PVC shoes to each legs complete all as specified and directed. |
| 23 | S&F steel channel to each drawer for Movement of pull out tray all as specified and directed. |
| 24 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 25 | TABLE CENTRE/TABLE CENTRE TWO TIER (FD-274)M & L for carrying out repair/replacement of following parts to table as per drawing after removing the old unservicable parts complete all as specified and shown on drg. |
| 26 | Top using 18mm thick prelaminated particle board exterior grade, Make Archid/ Novapan/ECO) ISI marked and 4mm thick teak wood beading all around. |
| 27 | Legs using Teak wood (MP Teak). |
| 28 | Long rails using Teak wood (MP Teak). |
| 29 | Short rails using Teak wood (MP Teak). |
| 30 | Stiffners using Teak wood (MP Teak). |
| 31 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 32 | CHAIR DINNING ( FD-279 & FD/MAP-II/5)M & L for carrying out repair/replacementof following parts to chair dining, as per drawing after removing the old unservicable parts complete all as specified and shown on drgs. |
| 33 | Legs using Teak wood (MP Teak). |
| 34 | Rails using Teak wood (MP Teak). |
| 35 | Stiffners using Teak wood (MP Teak). |
| 36 | Supply and Fixing of PVC seat to chair dining (FD/MAP-II/05) complete all as specified and directed. |
| 37 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 38 | CHAIR EASY (FD-229 & 1108)M & L for carrying out repair/replacement of following parts to chair easy as per drawing after removing the old unservicable parts complete all as specified and shown on drgs |
| 39 | Legs using Teak wood (MP Teak). |
| 40 | Rails using Teak wood (MP Teak). |
| 41 | Arms using Teak wood (MP Teak). |
| 42 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 43 | M&L for removing old broken cane and recanning with plastic cane (oval shape) 4 mm wide and border with 3mm wide cane complete as per Godrej pattern to the following furniture articals:- |
| 44 | Chair writing (Drg No FD-280 & FD-1107) |
| 45 | Chair dinning (Drg No FD-279) |
| 46 | Chair Easy (Drg No FD-229 & FD-1108) |
| 47 | SOFA SET THREE SEATER/SINGLE SEATER WITH DETACHABLE CUSHION (FD-373 / FD-1113)M&L for carrying out repair/replacement of following parts to sofa set, as per drawing after removing the old unservicable parts complete all as specified and shown on drgs. |
| 48 | Long rails of seat for three seater sofa of size 1590mmx100mmx35mm of using Teak wood (MP Teak). |
| 49 | Side rail of size 575mm x 100mm x 35mm of using Teak wood (MP Teak) |
| 50 | Long rails of seat for three seater sofa of size 1590mmx70mmx35mm of using Teak wood (MP Teak) |
| 51 | Long rails of single seater of size 575mmx70mmx35mm of using Teak wood (MP Teak). |
| 52 | Arms using Teak wood (MP Teak). |
| 53 | Leg using Teak wood (MP Teak). |
| 54 | Sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth not less than Rs. 180/- per meter as approved by GE. |
| 55 | Applying two coats of French polish (ready made) after necessary preparation of surfaces to sofa three seater |
| 56 | Applying two coats of French polish (ready made) after necessary preparation of surfaces to sofa single seater |
| 57 | TABLE WRITING (FD-275 & FD-240)M & L for carrying out repair/replacement of following parts of Table writing as per drawing after removing the old unsv parts complete all as specified and shown on drg. |
| 58 | Top of table using of 18mm thick prelaminated particle board ISI marked, including 6mm thick Teak beading all around. |
| 59 | Legs using Teak wood (MP Teak). |
| 60 | Rails using Teak wood (MP Teak). |
| 61 | Front of drawer and shutter of cabinet using 18mm thick prelaminated particle board (one side teak finish). |
| 62 | Shutter of cabinet using of 18mm prelaminated particle board(one side teak finish and other side white balancing laminated). |
| 63 | Sides, bottom and shelf of cabinet using 12mm thick particle board. |
| 64 | Bottom of drawer and side of cabinet using 6 mm thick commercial plywood. |
| 65 | Supply and fixing knobs to drawers. |
| 66 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 67 | TABLE OFFICE CLK (FD-1004)M & L for carrying out repair/replacement of following parts of Table office clk as per drawing after removing the old unsv parts complete all as specified and shown on drg. |
| 68 | Top of table using of 18mm thick prelaminated particle board ISI marked, including 6mm thick Teak beading all around. |
| 69 | Side, front and back of drawer using second class hard wood planks. |
| 70 | Bottom of drawer using 6mm thick commercial plywood. |
| 71 | Leg using Teak wood (MP Teak). |
| 72 | Rails using Teak wood (MP Teak). |
| 73 | Stiffners using teak wood |
| 74 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 75 | TABLE DRESSING GENTS WITH MIRROR (FD-230)M & L for carrying out repair/replacement of following parts of Table Dressing Gents as per drawing after removing the old unsv parts complete all as specified and shown on drgs. |
| 76 | Top of table using of 12mm thick wood plank with laminated sheet 1.5mm thick for one side. |
| 77 | Bottom and back of table using of 12mm thick wood plank . |
| 78 | Both side of table and front of drawer using 12mm thick teak wood plank with laminated sheet 1.5mm thick for one side , bottom of drawer using 6mm thick commercial plywood, side of drawer using 12mm thick teak wood plank. |
| 79 | Supply and fixing Chromium plated knobs for drawers complete all as specified and directed. |
| 80 | Supply and fixing mirror 5.5mm thick electro copper plated of polished plate with frame of Teak wood and back ply all as shown on Drg. |
| 81 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 82 | SIDE BOARD (FD-241)M&L for carrying out repair/replacement following parts to side board as per drawing after removing the old unservicable parts complete all as specified and shown on drgs. |
| 83 | Top using 18mm thick prelaminated particle board exterior grade, ISI marked including 4mm thick teak wood beading all around. |
| 84 | Legs using teak wood (MP Teak). |
| 85 | Bottom and shelvs of side board using 18mm thick prelaminated particle board exterior grade, ISI marked including 4mm thick teak wood beading all around. |
| 86 | Back using of 6mm thick commercial plywood |
| 87 | Side using 18mm thick prelaminated particle board |
| 88 | Front of drawers using 18mm thick prelaminated particle board, side and back of drawer using 12mm thick commercial plywood and bottom of drawer using 6mm thick commercial plywood. |
| 89 | Shutter of Cabinet using of 18mm thick prelaminated particle board fixed with continous piano type hinges. |
| 90 | Supply and fixing knobs for drawers and door shutter. |
| 91 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 92 | TABLE DRESSING LADIES WITH MIRROR (FD-251)M & L for carrying out repair/replacement following parts to table dressing ladies, as per drawing after removing the old unsv parts complete all as specified and shown on drgs. |
| 93 | Suuply and fixing mirror 5.5mm thick electro copper plated of polished plate with frame of Teak wood and back ply all as shown on Drg. |
| 94 | Top of table using of 18/19mm thick particle board decorated with phenol formal dehide with laminated sheet 1.5mm thick for one side, including 6 mm thick teak wood beading all around. |
| 95 | Bottom portion and side using 18mm thick Teak veneered face on one side and another side commercial particle board decorated with phenol formal dehide including 4mm thick teakwood beading. |
| 96 | Side of table and front of drawer using 12mm thick teak wood plank with laminated 1.5 mm thick in one side. |
| 97 | Side and back of drawer using 12mm thick teak wood plank, bottom of drawer using 6mm thick commercial plywood. |
| 98 | Supply and fixing knobs for drawers. |
| 99 | Leg using Teak wood (MP Teak). |
| 100 | supply and fixing plane sliding glass 5mm thick alongwith aluminum channel having02 trade 'U' shaped channel of required size. |
| 101 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 102 | CHAIR DINNING WITH CUSHION (FD/E6/ MAP/10'R')M & L for carrying out repair/replacement of following parts of Chair Dinning as per drawing after removing the old unservicable parts complete all as specified and shown on drg. |
| 103 | Legs using Teak wood (MP Teak). |
| 104 | Rails using Teak wood (MP Teak). |
| 105 | Stiffners using Teak wood (MP Teak). |
| 106 | Seat using 12mm thick BWR phenol bonded plywood over with 75mm thick 40 density foam cover with quality fabric cloth (cost of cloth not less than Rs. 150/- per meter) as approved by GE |
| 107 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 108 | BIN SOLID MULTIPURPOSE (FD/E6/MAP/09)M & L for carrying out repair/replacement following parts to bin solid as per drawing after removing the old unservicable parts complete all as specified and shown on drgs. |
| 109 | Top using 18mm thick prelaminated particle board, ISI marked and 4mm thick teak wood beading all around. |
| 110 | Legs using teak wood (MP Teak). |
| 111 | Back using 18mm thick prelaminated particle board. |
| 112 | Side, shelves and drawer using 18mm thick prelaminated particle board, ISI marked. |
| 113 | Stiffners using teak wood(MP Teak). |
| 114 | Shutters of cabinet using of 18mm thick prelaminated particle board fixed with continous piano type hinges. |
| 115 | Supply and fix CP MS handle |
| 116 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces. |
| 117 | ALMIRAH MEDIUM/ SMALL STEEL (FD - 1034/ 1032) |
| 118 | Repair to the almirahs such as removing dents from shutters,back, top, bottom and sides of almirah, repair and fixing of existing legs by welding, repair and refixing of existing shelves and making it servicable and applying a coat of redoxide primer where ever required all as directed and specified. |
| 119 | Supply and fix in replacement 3 way lock, 4 levers with duplicate Key and other standard makes as approved by GE all as directed and specified. |
| 120 | Supply and fix in replacement CP MS handles as pre existing pattern and design to any type of almirah complete all as directed and specified. |
| 121 | Repair/replacement of legs by welding to almirah med steel shall be made out of 1 mm thick plane black sheet all as directed and specified. |
| 122 | One coat spray painting to almirah medium steel inner and outer surface with synthatic enamel paint olive green including preparation of surface after cleaning dirt/dust with emery paper complete all as specified and directed. |
| 123 | ALMIRAH LARGE STEEL (FD-1033/ 1031, FD/E6/MAP/18) |
| 124 | Repair to the almirahs such as shutters,back top, bottom and sides of almirah, repair and fixing of existing legs by gas welding,repair and refixing of existing shelves and making it servicable and applying a coat of redoxide primer where ever required all as directed and specified. |
| 125 | Supply and fix in replacement 3 way lock, 4 levers with duplicate Key and other standard makes as approved by GE all as directed and specified. |
| 126 | Supply and fix in replacement CP MS handles as pre existing pattern and design to any type of almirah complete all as directed and specified. |
| 127 | One coat spray painting to almirah large steel inner and outer surface with synthatic enamel paint OG/ as per specified colour in drg, including preparation of surface after cleaning dirt/dust with emery paper complete all as specified and directed. |
| 128 | LOCKER STEEL (FD-1029) |
| 129 | Repair to the lockers such as removing dents from shutters, back, top, bottom and sides, repair and refixing of existing legs by welding, repair and refixing of existing shelves and making it serviceable and applying a coat of redoxide primer where ever required all as directed and specified. |
| 130 | Supply and fix in replacement of chromium plated handle as per existing pattern complete all as specified and directed. |
| 131 | Supply and fix in replacement chromium plated Haps and staple as per existing pattern complete all as specified and directed. |
| 132 | Supply and fix in replacement steel rod complete all as specified and directed. |
| 133 | Repair/replacement of legs by welding to locker steel shall be made out of 1 mm thick plane black sheet all as directed and specified. |
| 134 | One coat spray painting to locker steel inner and outer surface with synthetic enamel paint OG, including preparation of surface after cleaning dirt/dust with emery paper complete all as per drg. |
| 135 | CHAIR VERANDAH (FD-256, FD/MAP-II/06) |
| 136 | Welding broken joints of 20mm dia 16 gauge thick conduit pipe of chair verandah. |
| 137 | Supply & Fix hard rubber toes to legs all as specified and shown on drg. |
| 138 | M&L for preparation of old painted surfaces for painting to chair and apply one coat of white synthetic enamel paint to framed chair verandah complete all as specified. |
| 139 | Supply & fixing by welding of MS flat of size 32mm x 455mm x 5mm thick to lower portion of seat of chair verandah (FD/MAP-II/06) |
| 140 | Supply & fixing of Seat and Back to chair verandah (Drg No FD/MAP-II/06) shall be of 4 mm thick PVC (Weight not less than 1.85 kg) and with 10 Nos grooves to seat and back, all as specified and shown on drg. |
| 141 | Recanning of chair verandah (Drg No FD-256) with plastic cane (oval shape) 3mm wide and border with 4mm wide cane complete as per Godrej pattern (removing of old broken cane shall be done at BSO yard). |
| 142 | TEAPOY VERANDAH (FD-383, FD/E6/MAP/17 ) |
| 143 | Supplying and fixing top of 18 mm thick prelaminated particle board ISI marked exterior grade and 6mm thick Teak edging all around. |
| 144 | S&F Hard rubber/PVC shoes to each legs all as specified and shown on drg. |
| 145 | M&L for preparaing of steel surface of teapoy whereever required by welding and applying one coat of synthatic enamel paint of required colour all as specified and directed. |
| 146 | TABLE OFFICE OFFICER STEEL (FD-1003) |
| 147 | Top using 18mm thick prelaminated particle board ISI marked exterior grade and 6mm thick Teak edging all around. |
| 148 | S&F Hard rubber/PVC shoes to each legs all as specified and directed. |
| 149 | Repair/replacement of drawer and box of table using 1mm thick plane black sheet and applying redoxide primer to prepare surface all as shown on drawing. |
| 150 | S&F 3 way 4 lever lock to table and other standard makes as approved by GE |
| 151 | Apply one coat of synthetic enamel paint OG to steel frame , complete all as specified and directed. |
| 152 | CHAIR WRITING (FD/E6/MAP/12) |
| 153 | Removing the old unservicable fabric cover and foam from chair and welding the frame wherever required and preperation of entire surface and applying one coat of synthetic enamel paint of black colour all as specified & directed. |
| 154 | Supply and fixing seat and back shall be 12 mm thick hot pressed plywood up holstered with fabric and moulded polyurethane foam ( shall be 50 mm thick and moulded with density 50.55 kg per cubic mtr) with pvc lipping all around. The colour of fabric shall be approved by Engr-in-Charge complete all as specified and shown on drawing. |
| 155 | Supply and fixing a pair of arms made out of black integral skin polyurethane with 75-85 shore 'A' hard ness and reinforced with MS insert to chair writing all as shown on drg. |
| 156 | Supply and fixing rubber stoper shall be provided as shown on drg. |
| 157 | BED HARD STEEL (FD/E6/MAP/08) |
| 158 | Head board using 18mm thick prelaminated particle board (both side decorative finish shade, standeard PVC edging (minimum thickness 1.6mm) shall be provided allround in Head board, all as shown on Drg. |
| 159 | Foot board using 18mm thick prelaminated particel board (both side decorative finish shade, standeard PVC edging (minimum thickness 1.6mm) shall be provided allround in foot board, all as shown on Drg. |
| 160 | Supply hard rubber/PVC shoe to the bottom of each leg. |
| 161 | Top of bed using 12mm thick commercial ply wood ISI marked and providing 4mm thick teak wood edging the ply and shall be fixed with steel nut and bolts to steel frame, all as shown in Drg. |
| 162 | Supply only hexagonal bolt of size 10mm x 50mm |
| 163 | Applying one coat of synthetic enamel paint black to steel frame of bed hard steel, complete all as specified. |
| 164 | CHARPOY GI PIPE WITH 12 MM PLYWOODM&L for repairing of unsv parts and fixing new parts for items as mentioned below;- |
| 165 | Plywood top made out of 12 mm thick commercial type BWR exterior grade as per existing shape and size complete all as speciifed and directed. |
| 166 | Removing the existing unsv broken elbows of charpoy GI Pipe and supplying and fixing new 32 mm bore 3 way elbow ISI marked all as specified and shown on drg. |
| 167 | Supply and fixing 05 mm thick GI check nuts suitable for 32 mm dia pipe all as specified and shown on drg. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender