Tender For Repair/Replacement Of Hard Standing Path, Fencing And Misc B/R Wks At 150 Ta Under Ge (West) Delhi Cantt-10.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Hard Standing Path, Fencing And Misc B/R Wks At 150 Ta Under Ge (West) Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground Complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and directed by Engineer-in-Charge. |
| 3 | Excavation in post holes (or similar holes) n exc 0.5 cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface Complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete Complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc including embeding in concrete and similar work conforming to Fe-290 Gde-E-165 Complete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F 23-25mm factory made single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali approved design by Engineer-incharge which are machine 3D cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 56 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and GRIHA certified. Fixing on M.S (Mild Steel) frame made of required square hollow box section approved by engineer-in-charge including applying a priming coat of approved steel primer, places at grid made at 1.0 X 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (Mild Steel) framework with priming coat shall be paid separately). The manufacturer should be ISO 9001:2015 Quality Management System Certification and ISO 14001:2015 Environmental Management Systems with in-house testing facility and should have their own manufacturing plant in India complete all as specified and directed. |
| 7 | M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic anamel paint over and including one coat of red oxide Complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for preparation of new or previously untreated steel Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth and applying a coat of black bituminous paint complete all as specified and directed by Engineer-in-Charge. |
| 9 | Demolition of cement concrete(unreinforced) of any description andin any position not otherwise specifically provided for, complete all as specified and directed. |
| 10 | M&L 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 Complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F Chequered cement concrete PU coated colourtiles 300cm X 300cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments Complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for Surface dressing n exc 15 cm deep and getting out in soft/loose soil Complete all as specified and directed by Engineer-in-Charge. |
| 13 | M/L for Hard core of guage not exc 63mm with broken stone deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface Complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for 100mm PCC 1:4:8 type D2 (40mm graded aggregate) in sub base Complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 16 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required Complete all as specified and directed by Engineer-in-Charge. |
| 17 | Demolition of brickwork or stone/ boulder masonary built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 18 | M&L for brickwork in masonry with sub class 'B' old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 19 | All as per item No. 18, here-in-before, but except bricks complete all as specified and directed. |
| 20 | M&L Rendering 15 mm thick in CM 1:4 on brickwork or concrete surfaces, and finished even & smooth without using extra lime or cement complete all as specified and directed. |
| 21 | M&L for two coats of cement base paint over and incl priming plastered and other surfaces with a coat of alkali resistant priming paint and incl preparation of wall surfaces newly plastered, complete all as specified and directed. |
| 22 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc including embeding in concrete and similar work conforming to Fe-290 Gde-E-165 Complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 23 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc including embeding in concrete and similar work conforming to Fe-290 Gde-E-165 Complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender