Tender For special Repair To Roof Sheet False Ceiling And Other Allied Works To Bldg No T-3 Of 3 Jhar Bn Ncc At Morabadi Pocket Under Ge Ranchi
Tender Value
26.22 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
10 days left
EMD
52500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Roof Sheet False Ceiling And Other Allied Works To Bldg No T-3 Of 3 Jhar Bn Ncc At Morabadi Pocket Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Dimantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 2 | S&F 0.60 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. as in roof covering fixed with coach screw as per manufacturers instrution complete. |
| 3 | S&F 0.60 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof covering fixed with coach screw as per manufacturers instrution complete. |
| 4 | Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc |
| 5 | M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6 |
| 6 | M&L for half brick wall work with old size brick straight or curved on plan to any radius built in cement mortar 1:4 complete. |
| 7 | Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc . |
| 8 | M&L for rendering in cement mortar (1:6), 15 mm thick on fair faces of brick work / Concrete /stone surfaces finished even & smooth without using extra cement . |
| 9 | Description all as per above ser Item No 8 but in cement mortar (1:4) with applying water proofing compound (As per manufrature instruction) surface finished fair & even complete.(WPC will be paid saperatelly) |
| 10 | Supply only liquid water proofing compound. |
| 11 | Dismantling of wall and ceiling board any thickness/description including cover fillet . |
| 12 | S&F for Anodised Aluminium snap grid size 605x605mm frame work for false ceiling all as specified and directed by Engr-in- charge. |
| 13 | M&L 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping. |
| 14 | S&F 25 mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick with wood grain printed PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and as directed. |
| 15 | 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.etc, complete all as specified and as directed. |
| 16 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete . |
| 17 | Description all as per above ser Item No16 but exceeding 1.5 Sqm and not exc 4 Sqm each. |
| 18 | Taking down shutters of any description Area .exc 1 sqm but n exc 2 sqm each |
| 19 | Cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cm (1:3) or cement mortar 1:2:4 Type B-1 exc half brick but n.exc one brick thick |
| 20 | M&L Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete. |
| 21 | M&L Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete. |
| 22 | M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work. |
| 23 | M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping / frame to match. |
| 24 | S&F 2nd class hard wood 30 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass gauge etc with sush bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a). |
| 25 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (style), with particle board core and 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. |
| 26 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2004. |
| 27 | S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2004). |
| 28 | S&F Mild steel 300 mm long ordinary rat tial rod pattern springs including roller and roller plate complete all as directed. |
| 29 | S & F 100 mm Butt hinges medium weight medium cold rolled mild steel. |
| 30 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete. |
| 31 | S&F of 150 mm size mild steel pressed handles, chromium plated oval type. |
| 32 | Fix in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 33 | S&F powder coated anodised/aluminium frame of size 65mm x 38mm x 1.00 thick or appropriate section as directed including with frame standard section for sliding type windows /ventilatorss with one or more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with and including 5.5 mm thick tinted glass & SS wire mesh, n.exc 1 Sqm each panes (window of frame 3 tract wt not less than 0.50kg/RM and shutter having wt not less 0.45kg/RM) all as specified and directed |
| 34 | S & F as in repairs Steel ventilator with top hung shutter including hinges steel peg stay, complete. |
| 35 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples over steel windows and gauzed door. |
| 36 | S & F 4mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane . |
| 37 | Description all as per above ser Item No 36 but in 4 mm thick figured glass pin headed type complete. |
| 38 | Dismantling timber scantling 40 sqcm and over in section in any position in framed work complete. |
| 39 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 40 | M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165 |
| 41 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. including brushing neat cement slurry with 3.0Kg of Cement per Sqm complete. |
| 42 | Dismantling floor, hearth or wall tiling includiing cemenet mortar bedding, removing serviceable tiles to store and rubbish off the premises |
| 43 | M&L for 15mm thick in screed bed or bedding layer of Cement Mortar in 1:6 for laying floor finishes. |
| 44 | M&L for rendering 10mm thick in Cement Mortar 1:4 on fair faces of brickwork or concrete surfaces to receive wall finishes. |
| 45 | M&L DGVT tiles 8 to 10 mm thick ( square / rectangular) area of each tiles not exceeding 0.36 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match . |
| 46 | Description all as per above ser Item No 45 but on vertical surface as dado/ skirting |
| 47 | M&L for non-skid joint free ceramic coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match. |
| 48 | M&L for glazed ceramic coloured tiles in vertical surface 350x250x7mm/450x350xx7mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces as in vertical surfaces. |
| 49 | Demolition of stone slabs and tiles of any description or thickness bedded and pionted in any mortar asin floors, aprons etc. |
| 50 | M&L 18-20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required . |
| 51 | Demolition of cement concrete (reinforcement) any description and position not other wise specifically. |
| 52 | M & L for providing RCC (1:2:4) type B-1 ( concrete cast -in- situ) using 20 mm graded stone aggregate as in llintels upto 1.5m clear span, cills, steps, copings etc. |
| 53 | M & L for RCC( Nominal Mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall . |
| 54 | Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or slopeing) making fair finished surfaces complete. |
| 55 | S&F TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to |
| 56 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for (unreinforcement) |
| 57 | M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete. |
| 58 | M&L for PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains. |
| 59 | M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc. |
| 60 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregare as in foundation filling & mass concrete. |
| 61 | Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site . |
| 62 | Supplying and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 63 | Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site . |
| 64 | Supplying and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 65 | 20mm CPVC Brass Elbow for 'hot or cold' water supply connection and similar works etc,. |
| 66 | 20mm CPVC Brass Tee for 'hot or cold' water supply connection and similar works etc,. |
| 67 | Cutting chases, pinning in, in brick walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making not exc 10 cm girth. |
| 68 | Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store |
| 69 | S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I |
| 70 | S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 25 mm bore pipe |
| 71 | S&F, vitreous china pedestal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe & EWC seat cover etc complete and making good to floor complete. |
| 72 | S&F in repair EWC sheet cover to match EWC complete. |
| 73 | S&F in repair 10 litres capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket . |
| 74 | S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing . |
| 75 | S & F in repairs Vitreous China half stall urinal flat back, white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) |
| 76 | S&F in repair brass chromium plated Basin mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC. |
| 77 | S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern |
| 78 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 4mm thick AC building board or commercial plywood and aluminium channel beading provided all around and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 79 | S & F in repairs Aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges |
| 80 | S&F in repair chromium plated health faucet for EWC with 1 meter PVC tube and hook complete all as specified and directed. |
| 81 | S&F grating doom 100mm dia CP/PTMT min weight 25gm fixed in repair |
| 82 | S&F in repair 100 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement. |
| 83 | S&F 110 mm bore PVC (SWR) pipes single socked in any length with rubber ring joints laid in trenches or in floors . |
| 84 | S&F, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in treches or in floors. |
| 85 | S&F PVC (SWR) bends any radius 110 mm dia |
| 86 | S&F PVC (SWR) 75 mm bore bends of any radius |
| 87 | S&F 100mm bore PVC (SWR) vent cowl |
| 88 | Supply only of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe. |
| 89 | S & F in repair, 15 mm bore fancy type bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule. |
| 90 | S & F 15 mm bore two way long body bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 91 | S&F in repairs stop valve/angle cock fancy type of 15 mm dia cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle long shank and cup (concealed type) screwed both ends for iron pipes or for unions. |
| 92 | S&F in repair Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe. |
| 93 | Supply and fix PVC connections 15 mm size with PTMT nuts of length 450mm. |
| 94 | S&F Chromium plated toilet paper holder with flap of standard size as per specification and as directed by Engr in charge. |
| 95 | S&F in repairs Glass shelf assembly consisting of 5.5 mm thick sheet glass with CP brackets and CP frame Size 600mm long complete |
| 96 | S&F CP soap tray fixed with rawl plugs complete. |
| 97 | M & L including preparation of new plastered wall surfaces and treating with two coat of oil bound distemper over a coat of primer over one coat of wall care putty . |
| 98 | Complete removal of existing treatment and applying two coat of oil bound distemper over a coat primer over one coat of wall care putty on old plastered wall surfaces. |
| 99 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness on new plastered wall surfaces. |
| 100 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness after complete removal of existing treatment on wall surfaces. |
| 101 | M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described. |
| 102 | M&L, applying one coats of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described. |
| 103 | S&F Harrision rails , mild steel of anodised alloy with fixing brackets, stops, rollers incl endcaps etc. |
| 104 | S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen with plug washers and waste coupling and pipe incl cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160 mm. |
| 105 | S&F in repairs stainless steel plate rack 1mm thick of size 750X600mm and depth 250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces . |
| 106 | M&L for fabrication of aluminum powder coated doors with box section frame of 65 x 35 x 1.15mm thick, shutter with top and bottom rail of section 100 x 45 x 1.35mm thick, style and middle rail of section 45 x 45 x 1.35mm thick with locking arrangements with lock with rebates including jointing cleats for fixing builder hardware fittings, , grating clips, rubber packing for air locking purpose, handle 120mm dia pivot, aluminium tower bolts 150mm long, anodized aluminium snap beading screw etc for fixing glass panes in frame shutter covered with fully selected quality sheet glass of 4.8mm thick with rubber packing complete all as specified and as directed. |
| 107 | S&F in repairs aluminium dicast body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete |
| 108 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for taking credit and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 109 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 110 | Taking down ceiling fan/ exhaust fan and refixing of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades complete all as specified and as directed. |
| 111 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- (Note: Rate of modular cover plates are deemed to be included in the rate quoted) |
| 112 | (a) One light point controlled by one, one way switch 5 Amps |
| 113 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 114 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 115 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 116 | Description all as per above ser Item No 111 here in before but using 2.5 sq mm single core copper conductor cable FRLSH of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm FRLSH copper conductor cable PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 117 | Description all as per above ser Item No 111 here in before but using 4.0 sq mm single core copper conductor cable FRLSH of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm FRLSH copper conductor cable PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.( for AC point) |
| 118 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified |
| 119 | S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 120 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 121 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 122 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 123 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 124 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 125 | S & F for MCB Single pole and neutral rated capacity 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 126 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 127 | S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 9/10 watts complete all as specified and as directed. Make Havells , Philips, Bajaj. |
| 128 | S & F for Lamp holder, PVC body suitable for batten fitting completes all as specified. |
| 129 | S & F for LED mirror light 9/10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Havells, Philips. |
| 130 | S & F for Energy saving new generation 9/10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :-Havells Bajaj Philips |
| 131 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Philips, Havells. |
| 132 | S & F for recess mounted 2' x 2' square LED panel 36 watts, 596 x 596 x 9 mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. |
| 133 | S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium ip 66 for building security light fitting luminare with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangement and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge.Make:- Bajaj, Philips, Havells |
| 134 | S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed |
| 135 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 4 core |
| 136 | Excavation in trenches n. exc 1.5 m wide & n. exc 1.5 m in depth for laying under ground cables/erection of pole and getting out in soft loose soil, complete all as specified. |
| 137 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified. |
| 138 | Removal of excavated surplus material (Soil) to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified. |
| 139 | M&L for Sand filling in cable trenches for cable protection with clean dry sand unwashed including gently put in trences. |
| 140 | S&F for old size brick well burnt, laid flat, for cable protection complete all specified and directed. |
| 141 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable,one run of 4.0 sqmm cable and one run of PVC casing caping will be measured as one unit |
| 142 | S & F for metal body exhaust fan, AC single phase, 240 V of size 225 mm sweep 1380 rpm with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and M&L for making hole and proper finishing the surface as existing before and taking down of old unserviceable fan complete all as specified and as directed |
| 143 | M& L for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised earth wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No 3 of MES Schdule Part-I connected to earthing point and testing on completion with and including 15mm bore light grade GI protection pipe (upto 7.5 meter beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C-1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8mm dia TMT bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore medium grade GI watering pipe common salt and charcoal filling, necessary excavation and earth work complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender