Tender For Repair/ Maintenance Including Replacement Of Damaged Barbed Wire, Concertina Coil, Chain Link Fencing, Security Gate, Footpath, Storm Water Drain, Compound Wall, Painting Of Perimeter Wall, Sewage Network And Repair/ Maintenance Incl Repla
Tender Value
19 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
38000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Including Replacement Of Damaged Barbed Wire, Concertina Coil, Chain Link Fencing, Security Gate, Footpath, Storm Water Drain, Compound Wall, Painting Of Perimeter Wall, Sewage Network And Repair/ Maintenance Incl Replacement Of Damaged Ug Xlpe Cable, Security Light, Street Light At Engineer Lines, Kurukshetra Lines, Did Lines & Rameshwaram Lines At Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 2 | M & L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even complete. |
| 3 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified. |
| 4 | M&L for preparation of old plastered surfaces and applying one coat of cement based paint complete all as specified. |
| 5 | Dismantling fencing wire mesh any type |
| 6 | Dismantling posts/pillers or struts (Wood, Steel, or RCC) any section, including taking out embedded portion and making good disturbed ground. |
| 7 | Excavating in post holes (or similar holes) each not exc 0.5 cu.m, getting out, retuning, filling in and ramming earth broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil. |
| 8 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone as in foundation , filling and mass concrete complete. |
| 9 | S&F Mild steel framed work as in posts and struts in fencing including cutting tops to shape as directed, drilled holes,notching for wire etcflats iron fillets (for securing wire mesh etc ) including all necessary drilling,bolting or fixing etc, and similar work confirming to Fe-290 GdeE -165 . |
| 10 | Supply only 3 mm dia galvanised iron chain link fencing of mesh size 75x75 mm . |
| 11 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. |
| 12 | S&F mild steel screw bolts (machine made ) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long of diameter of shanks 11 to 15 mm |
| 13 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured |
| 14 | Description as per item no 13 above but restraing recurring including making good staples etc only |
| 15 | M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide of approved colour and shade. |
| 16 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 17 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging of Fe-290 (Gde E- 165) also fastening and fixing complete. |
| 18 | Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses. |
| 19 | Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level). |
| 20 | M&L for 75mm thick PCC type D2, 1:4:8 (using 40mm graded stone agg) as in sub base floor surface complete. |
| 21 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed or bedding in CM 1 : 6 complete all as specified. |
| 22 | M&L Providing, cement concrete type B1 1:2:4 (20mm graded aggreate) as in kerbs or mud stops, rounded or chamfered on edges etc similar work complete. |
| 23 | S&F 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 24 | Demolition of brick wk masonry built in cement mortar incl all quoins arches pillars etc |
| 25 | M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6 |
| 26 | M & L PCC 1 : 4 : 8 type D-2 using 40 mm stone aggregate as in foundation filling and mass concrete . |
| 27 | M&L for Plain cement Concrete C2,1:3:6 (40mm graded aggregate) as in surface channels and drains. |
| 28 | M & L PCC 1:2:4 type B-1 using 20 mm graded store aggregate as in coping including use and waste of form work where necessary. |
| 29 | M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc. |
| 30 | Exavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 Mtr in depth for foundation, disilting of drains, manhole, laying of cable etc n exc 10sqm on plan and n exc 1.5m in depth and getting out in any tpe of soil. |
| 31 | Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed. |
| 32 | Removing Surplus soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed. |
| 33 | Demolition of cement concrete (reinforcement) any description and position not other wise specifically. |
| 34 | M&L for precast RCC 1:2:4 manhole cover extra set in cement mortar 1:6 |
| 35 | M & L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips. |
| 36 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. |
| 37 | M&L for Sand filling under floors or in foundation including watering and consolidation for laying interlocking tiles complete all as specified and directed. |
| 38 | M& L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment in paths and hardstanding laid tightly over dry sand cushion (compacted) and joint filled with dry sand(colour and pattern as approved by GE) complete all as specified and directed.(Note: Sand will be measured and paid separatly). |
| 39 | M&L for preparation of old plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified. |
| 40 | M&L for complete removal of existing treatment from wall surfaces |
| 41 | M & L old size Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in built in CM 1:4 . |
| 42 | M&L old size Brick work with sub class 'B' Bricks straight or curved on plan to any radius in half brick thick wall built in cm 1:4 . |
| 43 | M&L loose filling using broken bricks with aggregate of gauge 80 to 150mm in soakage pits & soakage wells etc. |
| 44 | M & L, 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:3) surface finished even & smooth without using extra cement using WPC. |
| 45 | M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished even & smooth without using extra cement using WPC. |
| 46 | M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished even & smooth without using extra cement using WPC. |
| 47 | M & L for cleaning of Manholes (as existing shape & size) of depth exc 1.0 Meter but n.exc 2.00 Meter by pumping out the sewage water complete removing the sluge and other materials from Manholes by Mechanical means , roading or any other suitable means removing the accumulated Night Soil, Sludge and other materials obtained from sewage lines and disinfacted the sludge within 50 metres distance including necessary excavation of Pits & returning, filing in sprinkling of Bleaching powder @ 0.50 kg/Sqm and dressing of surplus Soil, ground to slope if required and well flushing the manholes with water complete all as specified and directed by Engr-in-Charge |
| 48 | Dewatring /Desludging of septic tank/soak well /soak pit and Manhole by manually or mechanically and removing muddy soil sludge etc . The removal of sludge to a distance not exceeding 250 metre and burried in the same pit. |
| 49 | S & F in replacement of Junction Box for Street Lights of size 250 x 300 x 150 mm made out of CRCA sheet 2 mm thick totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection single leaf shutter in front having proper locking arrangements, and painted with powder coating paint and suitable size of \\"connectwell\\" stud terminal (provision for socket bolting)- 05 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable clamp made out of MS flat of size 32 mm x 6 mm thick bend to required shape and suitable size of nuts, bolts including removal of existing unsv one of any type complete all as specified and directed. |
| 50 | M & L in replacement for Street Light Fitting Bracket made out from GI Pipe 40 mm bore (dia), medium grade 1.50 metre long, bent to required shape and fixing to Poles with and including Clamp sets suitable for tubular pole made out of MS flat iron of size 40 mm x 6 mm thick, Nuts, Bolts as required duly painted with Two Coats of Aluminum Paint over a coat of Red Oxide Zinc Chrome Primer including taking down old unserviceable bracket, comlete all as specified and as directed.Note : Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemd to be included in the quoted Unit Rate. |
| 51 | S & F in replacement of for Energy saving new generation environmental friendly LED street light luminaire with long life versatile pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection with high power LEDs as light source and electronic driver of capacity 90 watts with pre wired and necessary mounting arrangement and provision of 4 sq mm twin core copper conductor cable multi stranded from fitting to junction box including necessary GI pipe medium braket of required dia 1.5 mtr long bend to required shape with suitable with MS clamps made out of flat iron of size 40 x 6 mm - 02 sets, bolt & nuts and taking down old unserviceable Street Light Fitting form Electric Pole of any description complete all as directed by Engineer- in-charge. |
| 52 | S&F in replacement driver for LED energy saving & enviornment area light fitting > 90 watts security light with active power factor correction (APFC) electronic driver. LED driver 90 Watt with operating voltage between 100-270 V of existing specifications & make complete all as specified and directed by Engineer-in-Charge. |
| 53 | Description all as per above ser Item No 52 but for LED Street light 60 watt |
| 54 | Supply and fixing in replacement of LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified & directed. |
| 55 | Taking down old unserviceable and Supply and fixing connecting and testing (in replacement) time switch panel box size 400mm x 350mm x170 mm dust and vermin proof made of 16 gauge MS sheet factory made duly painted with two coats of synthetic enamel paint recommended colour over a coat of red oxide primer and mounted inside the following .Location-wise photos be attached alongwith the bills..Note:- Time switch pannel box shall be fixed on one pole/wall in feeder pillar box with flat iron clamp 40x6 mm or other suitable fixing arrangement complete all as specified and directed.MCB triple pole 32 Amps 230 volt-01 No Analog electro mechanical time switch 24 hours with minimum setting 30 minutes for daily working contact rating 16 Amps,240 volts,AC with initial charging battery backup having supply and reserve failure upto 150 Amp hours and coil voltage 415 volts AC contactor ,3 pole,ML-2,415 Volts,50 Hz Internal wiring with pvc insulated stranded copper conductor of suitable size and making electric connection -01 No. By pass MCB single pole ,32/40 Amps,230 volts-01 No. Note:- Time switch panel box shall be fixed on one pole/wall in feeder pillar box with flat iron clamp 40x6 mm or other suitable fixing arrangement complete all as specified and directed. |
| 56 | M & L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 18 cm thickness, complete all as specified and as directed. Note : For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid. |
| 57 | S & F Sub-Class ‘B’ Brick, well burnt, laid breadth wise along the length of Cable laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed. |
| 58 | Supply & Fixing or Passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 6 sqmm 2 core including Brass compression cable gland, terminal lug etc and testing complete all as specefied and as directed |
| 59 | M& L for GI tubing medium grade of size 50 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc including taking down of old unseviceable pipe any type and any size complete all as speified and directed.Note - Excavation to be paid separately in respective items. |
| 60 | M& L for GI tubing medium grade of size 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc including taking down of old unseviceable pipe any type and any size complete all as speified and directed.Note - Excavation/PCC cutting to be paid separately in respective items. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender