Educational and Research Institute Boards / Undertakings / PSU Closing in 16 days TDR #57088761

Tender For Electrical Work For Extended Area Of Dining Hall Of Guest House And Dg Shed At Ipr Bhat, Gandhinagar.

Issued by Boards / Undertakings / PSU · Ahmedabad, Gujarat
Tender Value
1.32 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
16 days left
EMD
2647
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmedabad → Gujarat
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Electrical Work For Extended Area Of Dining Hall Of Guest House And Dg Shed At Ipr Bhat, Gandhinagar.

BOQ

Name of Work:- Electrical work for extended area of dining hall of guest house and DG shed at IPR Bhat, Gandhinagar.
Sl. No. Item Description
1Run of mains (Concealed/Open PVC conduit)
2Supply and wiring with two runs of FRLSH 4 sq. mm 1.1 KV grade PVC insulated , single core , stranded copper conductor cable conforming to IS:694 (with latest amendments) in 25mm diameter electrical grade MMS grade , ISI marked, 2mm thick PVC Conduit concealed/open in wall, or ceiling and earthing with 4 sq. mm insulated copper wire run inside the conduit including supply of fixing materials and accessories, interconnections complete as required as directed by Engineer in Charge (EIC) or his representative.
3Supply and wiring with two runs of FRLSH 2.5 sq. mm 1.1 KV grade PVC insulated , single core , stranded copper conductor cable conforming to IS:694 (with latest amendments) in 20mm diameter electrical grade MMS grade , ISI marked, 2mm thick PVC Conduit concealed/open in wall, or ceiling and earthing with 2.5 sq. mm insulated copper wire run inside the conduit including supply of fixing materials and accessories, interconnections complete as required as directed by Engineer in Charge (EIC) or his representative.
4Ceiling fans (BLDC ceiling fan)
5Supply of 1200 mm sweep BLDC ceiling fans with regulator with the rated voltage 160V-265V, frequency 48-52 Hz, minimum air delivery 225 m3/min, input power 28-35 Watts with 3 leaf, remote ON/OFF, speed control completely pre-wired up to terminal block complete as required. The ceiling fan shall be BEE 5-Star Rated.
6Indoor luminaires (LED light fitings/luminaires)
7Supply of LED light fittings with driver, thermal management, optics along with suitable casing etc. These light fitting shall have a lumens output/ watt : ≥ 100 for indoor luminaire, ≥ 80 for outdoor luminaire, THD ≤ 10/15 % , CRI > 0.7 , power factor ≥ 0.95 as per IS 16107-2-1 (Part -2) with latest amendments, CCT - 5700K & shall be inclusive of LED lamps & other accessories complete as required & as directed by EIC.Driver shall conform to relevant parts of IS 15885 with latest amendments.Note: Lumens output indicated with LED light fittings shall have minor tolerances/variations of +10% as per manufacturer's standards.
83600 lumens output recessed/surface mounted square type (2 ft x 2 ft) fitting THD ≤ 10%
9LED Waterproof LED Luminaire (IP65/IP66)
103600 lumens output anti corrosive, dust proof, waterproof LED luminaires (1200mm) THD ≤ 10%
11Concealed/Open PVC conduit wiring (A/C Point)
12Supply and wiring with 4 sq. mm , 1.1 KV grade, ISI marked , PVC insulated , stranded , FRLSH copper conductor cable conforming to IS:694 (with latest amendments) in 25mm diameter 2mm thick, Electrical grade MMS grade PVC Conduit concealed/open in wall, or ceiling, or floor, or coloumn including supply and fixing of 20/25 Amp. DP MCB in metal sheet enclosure suitable for DP MCB of suitable size and earthing with 4 sq. mm insulated copper wire run inside the conduit including interconnections, supply of fixing materials, complete as required as directed by Engineer in Charge (EIC) or his representative.
13Ceiling fan point (with regulator )Supply and wiring for ceiling fan point with 1.5 sq. mm , 1.1 KV grade, FRLSH ISI marked , PVC insulated , stranded single core, copper conductor cable conforming to IS:694 (with latest amendments) in 20mm diameter 2mm thick, Electrical grade MMS grade PVC Conduit concealed/open in wall or ceiling, including supply and fixing of 5/6 Amp. , modular (plate) control switch fixed in suitable size metal sheet box suitable for modular switches suitable and fan regulator (two modules) suitable for conventional/BLDC and covered with modular switch plate and earthing system with 1.5 sq.mm insulated copper wire run inside the conduit including supply of all materials , accessories like fan hook welding to metal member at ceiling, terminal block, interconnections etc. complete as required as directed by Engineer in Charge (EIC) or his representative.
14Primary point:Supply and wiring with 1.5 sq.mm, 1.1 KV grade, ISI marked, PVC insulated, stranded, FRLSH Copper conductor cable conforming to IS:694 (with latest amendments) in 20 mm dia, 2 mm thick electrical grade MMS grade PVC conduit concealed/open in column, floor,wall or ceiling including supply &fixing of modular (plate) 5/6 Amp. , flush boxes suitable for modular switches and covered with modular switch plates and earthing with 1.5 sq.mm insulated copper wire run inside the conduit including supply of all fixing materials, accessories and interconnections complete as required as directed by Engineer in Charge (EIC) or his representative.Notes:1. Rates for all the point wiring items is inclusive of necessary circuit mains from the distribution board to the first switch board and also sub circuits from one switch board to the subsequent switch boards in the same circuit.2. The secondary point in case of point wiring shall include necessary wiring looped from the primary light point as indicated in the electrical layout drawings.3. Rates for the power point wiring items is inclusive of necessary power circuit from the DB to the power socket.
15Secondary point:Supply and wiring generally same as item no. 5.3 above, but without control switch
165/6 AMPS, 3 Pin switch socket outlet point:Supply and wiring with 1.5 sq.mm, 1.1 KV grade, ISI marked, PVC insulated, stranded, FRLSH Copper conductor cable conforming to IS:694 (with latest amendments) in 20 mm dia, 2 mm thick electrical grade MMS grade PVC conduit concealed/open in column, floor,wall or ceiling including supply &fixing of modular 5/6 Amps. , 3 pin switch socket oulet in a suitable size metal sheet box for modular switches and sockets and covered with modular switch plate complete as required as directed by Engineer in Charge (EIC) or his representative.
171 No. 15/16 Amp and 1 No. 5/6 Amp 3 pin combined switch socket outlet point:Supply and wiring with FRLSH 2.5 sqmm. 1.1 KV grade, ISI marked, PVC insulated , single core stranded copper conductor cable conforming to IS:694 ( with latest amendments) in 20 mm diameter 2 mm thick, electrical grade MMS grade PVC conduit concealed/open in ceiling, or wall, or floor including supply and fixing of modular 1 no. 15/16 Amp. , 3 pin and 1 No. 5/6 Amp. 3 pin combined switch socket fixed in same metal sheet box of suitable size complete as required as directed by Engineer in Charge (EIC) or his representative. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57088761
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 1.32 Lakhs
LAST DATE 08-09-2026
Authority
Authority Name Institute For Plasma Research
Work Description Tender for Electrical Work For Extended Area Of Dining Hall Of Guest House And Dg Shed At Ipr Bhat, Gandhinagar.
Basic Detail
Tender No IPR/TN/ELEC/02/2026/LTD
Bidding Type Tender
Location
City Ahmedabad
State Gujarat
Key Dates
Publish Date 19 Aug 2026
Submission Date 08 Sep 2026
Open Date 10 Sep 2026
Finance
Tender Value 1.32 Lakhs
Tender Fee Ref. Documents
EMD 2647
Exemption Not Available
Document List
56654adc-babf-41c8-9bb7-693ecd1ac541.html
BOQ_969136.xls
TechnicalBidIPRTNELEC022026LTD.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Sep 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

56654adc-babf-41c8-9bb7-693ecd1ac541.html

xls

BOQ_969136.xls

pdf

TechnicalBidIPRTNELEC022026LTD.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders