Tender For Upgradation Of Central Verge In Sector-08, Dwarka. Sh:- Supplying, Installation, Testing And Commissioning Of Automatic Misting System Including Civil Work At Sec-8 Road Dwarka.
Tender Value
1.74 Crore
Estimated cost
Bid Submission
29 Aug 2026
6 days left
EMD
3.48 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Central Verge In Sector-08, Dwarka. Sh:- Supplying, Installation, Testing And Commissioning Of Automatic Misting System Including Civil Work At Sec-8 Road Dwarka.
BOQ
| Sl. No. | Item Description |
| 1 | PART ASupplying and laying of stainless steel (SS:304) pipe of size 25mm OD is designed for high-pressure misting systems up to suitable depth below the ground level with trenching and backfilling, capable of handling operational pressures 80 bar. Made from durable, corrosion-resistant stainless steel, this seamless pipe ensures reliable performance in demanding environments, such as outdoor cooling systems, greenhouses, and industrial misting applications. Its polished exterior prevents rust and scaling, while the precision-engineered wall thickness guarantees strength and safety under high pressure. Compatible with various high-pressure fittings, this pipe meets international standards like ASTM A269/A213, making it ideal for both residential and commercial misting installations, including supplying and fixing of all other suitable accessories for connection between steel pipe and nylon pipe ,cutting,welding, testing & commissioning etc. as required. |
| 2 | Supplying and laying of stainless steel (SS:304) pipe of size 15mm OD is designed for high-pressure misting systems up to suitable depth below the ground level with trenching and backfilling, capable of handling operational pressures 80 bar. Made from durable, corrosion-resistant stainless steel, this seamless pipe ensures reliable performance in demanding environments, such as outdoor cooling systems, greenhouses, and industrial misting applications. Its polished exterior prevents rust and scaling, while the precision-engineered wall thickness guarantees strength and safety under high pressure. Compatible with various high-pressure fittings, this pipe meets international standards like ASTM A269/A213, making it ideal for both residential and commercial misting installations, including supplying and fixing of all other suitable accessories for connection between steel pipe and nylon pipe ,cutting,welding, testing & commissioning etc. as required. |
| 3 | Providing & Fixing of 9mm high-pressure nylon pipe (on the exiting pole up to required height) is designed for applications requiring a pressure rating of 80 bar, making it ideal for use in misting systems, industrial automation, and other high-pressure environments. Constructed from durable, lightweight nylon, this pipe offers excellent flexibility, resistance to abrasion, and chemical stability, ensuring long-lasting performance under demanding conditions. Its smooth inner surface minimizes friction losses, promoting efficient fluid flow, while its tough outer layer withstands environmental factors like UV exposure and impact.Including supplying and fixing of all other suitable accessories for inter connection between nylon pipe misting nozzle, testing & commissioning etc. as required. |
| 4 | Providing, fabricating, supplying, fixing and commissioning of Stainless Steel (SS-304) Ring Bracket/Clamp for mounting of misting system on existing pole with connection of pipeline, nozzle assembly and accessories. The ring bracket/clamp shall be manufactured from high-quality Stainless-Steel Grade SS-304 with inner dia 180 mm-190 mm and outer dia 900 mm. it should be corrosion resistant and suitable for outdoor atmospheric conditions. The bracket should have the provision of 6 outlet of 8mm to fix the cluster of nozzles 5 on each. Fabrication shall be neat, rigid and free from cracks, sharp edges, bends or manufacturing defects complete as required and as directed by Engineer-in-Charge. |
| 5 | Supplying and fixing of Brass type Misting Nozzle on existing bracket ,capable for throw the water jet upto one meter radius with a discharge rate 2.8 LPH at operating pressure 50 bar, featuring a precision-drilled orifice, integrated filter, and corrosion-resistant finish , Including supplying and fixing of all suitable accessories for connection between misting nozzle and braket , testing & commissioning etc. as required. |
| 6 | Supplying ,installation ,testing and commissioning of Ball Valve Metallic of size 25 mm Including supplying and fixing of all suitable accessories for connection , testing & commissioning etc. as required. |
| 7 | Supplying ,installation ,testing and commissioning of reciprocating Pump capable for discharging water 2.6 cu meter @ 80 bar head with NRV and header fittings complete including supplying and fixing suitable size electric cable, base frame i/c foundation, panel with sequential timerwith all fittings complete as required.( i/c 3 phase induction motor capacity of 15 HP) |
| 8 | Supplying ,installation ,testing and commissioning of Pump Starter Relay suitable for pumpset of minimun capacity 15 HP Including supplying and fixing of all suitable accessories like cable ,wire etc., connection , testing & commissioning etc. as required. |
| 9 | Supplying ,installation ,testing and commissioning of Reverse Osmosis (RO) system shall have a capacity of 2000 liters per hour (LPH) (and output water TDS upto 50 PPM) and be equipped with all necessary components, including high-pressure pumps, membranes, filters, and associated piping for efficient operation. The system will include a highpressure pump capable of delivering the required pressure for optimal membrane performance, typically around 10-15 bar, with corrosionresistant materials to handle water conditions. The RO membranes shall be of high quality, TFC (Thin Film Composite) type, with a recovery rate ofup to 75%, designed to remove dissolved solids, contaminants, and impurities, ensuring high-quality permeate water. The system will feature a pre-treatment stage with multi-media and activated carbon filters to remove sediment, chlorine, and organic matter, ensuring the longevity of the membranes. It shall also include an anti-scalant dosing system to prevent membrane fouling. Post-treatment options, such as UV sterilization or ozonation, may be provided for disinfection purposes. The system shall be fully automated with a control panel for real-time monitoring, pressure gauges, flow meters, and safety features like low-pressure and highpressure switches, ensuring smooth operation and protection of the components. The frame should be made from stainless steel for durability and corrosion resistance, and the entire system must be easy to maintain, energy-efficient, and compliant with international water treatment standards. Including supplying and fixing of all suitable accessories for installation etc. as required. |
| 10 | Providing, laying & jointing and commissioning of HDPE pipe of 63 MM OD PN 6 PE 100 conforming to IS:4984 :2000 and suitable for the respective working pressures with all Electrofusion fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, including earth work in excavation and refilling (Earth work includes 450mm of soil cover over the pipe and width of 300mm). |
| 11 | Providing & Fixing of 16mm/30cm/2LPH dripline with all necessory fittings like take odd, grovemet, tee elbow etc. Pipe Material: Virgin LLDPE (UV stabilized), Wall Thickness: 1.0 ± 0.1 mm, Operating Pressure Range: 0.8 – 4.0 kg/cm² Flow Path: Turbulent flow path to minimize clogging. |
| 12 | Providing and Fixing of PVC ball valve single union of 40 mm dia PN 6 with all necessory fittings. Body Material: Plasticized Polyvinyl Chloride (uPVC / PVC-U). Handle: High-strength ABS / PVC, ergonomically designed. Test Pressure: 1.5 × PN (Hydrostatic). Colour: Grey, UV Stabilized. |
| 13 | Providing & Fixing of 3/4\\" One piece Plastic QCV along with key and sweil elbow. It has auto close lid made of heavy duty rubber when QCV is not in use, one piece construction, having stainless steel spring. Body Material: High-strength engineering plastic (Polypropylene). Pressure Rating: PN 6 (6 kg/cm² at 27 °C). Operating Pressure Range: 1.0 – 6.0 kg/cm² |
| 14 | Providing and Fixing of PP Service Saddle of 63 mmX3/4\\" with brass bush and 3/4\\" Nipple of sutaible height. |
| 15 | Providing & Fixing of Valve box 6\\" Round Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture. Top Diameter (Cover OD): ~6 inch (150 mm). Height: ~8 inch (200 mm) |
| 16 | Providing & Fixing of 3 way pilot operated Quick Pressure relief valve size 2\\" along with bypass arrangement.. It shall be adjustable Pressure setting from 21 PSI - 130 PSI for maximize performance. It has 3 way pilot with 4 ports of the size 1/8\\"-28 BSP at a tempreture of 600c. It should be made of high streangth engineering plastic with great durability and corrosion resistance. Its pilot has glass reinforced plastic base and cap for streangth, Pilot has a max height of 155 mm and width of 69 mm. |
| 17 | Providing & Fixing of a double acting Continuous Air release & Vacuum Relief valve 2\\" made of Aluminum. The Continuous Air release valve shall be capable of both releasing and admitting air from and into the line during system operation. The minimum sealing pressure of the valve is 7 PSI while working pressure shall be 7-150 PSI. The valve height should be 266, width 135 mm and weight should be 2640 gm. |
| 18 | Providing & Fixing of filter (120 mesh) 25m3 /hr having an inlet & two outlets connections of 3\\", 2 pressure gauze ports of 3/4\\" ,a helix made of fiber glass reinforce polyamide at base of screen filter cartridge to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4\\" outlet for flushing at bottom of filter & maximum working pressure of 14 bars. . |
| 19 | Providing & Fixing of Pressure Gauge (Glycerine filled and stainless steel body). Accuracy: ± 2% of F.S, Operating Pressure Range: 75% of Scale Value, Case & Bezel: Engineering Plastic (Push Fit Type), Socket: Copper Alloy, Joints: Alloy Brazing/ Soldering, Dial: Plastic, Black Graduation on White Background Harit/Aqua/Armas/Wika |
| 20 | Providing and Fixing of enclosure for electrical equipment duly powder coated with complying to IP 55 with dimension 500(H)x 500(W)x 210 (D) MM along with mounting plate, Bottom gland plate, Faricated out of CRCA steel sheet 16/14 SWG. |
| 21 | Providing and Fixing of three phase motor capaity of 5 H.P Booster Pump Capable of Discharging 2.0 lps at 30 mtr Head with Control Panel Suction and Delivery assembly. |
| 22 | Providing and Fixing of Water Level Sensor. It should be have low and high level both and will swith off the pump in event of water goes below the set level of sensor to avoide the dry run the pump and shutt off valve to avoide overflow. Input Voltage: 220 VAC, Out put Current 5A, Water dip senser SS. |
| 23 | Providing & Fixing of 2\\" BSP Straight flow 3 way Solenoid valve with victaulic grooved coupling flow control and \\"pressure regulation unit\\" which shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact, weather-resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for \\" tamper proof\\" operation. The valve shall operate with minimum 24 VAC at 10.5 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation. |
| 24 | Providing and Fixing of single station BOC. With IP 68 watertight eloserbody, Power supply: 2 alkaline battaries 1.5volts, backlift screen with closer lid, Low battery signal Maximum nos of zone-1, Number of programs-1, start time per program-1, Maximum nos of starts per day:8, minimum irrigation time per zone: 1 minute, Maximum irrigation time per zone: 180 min, Irrigation frequency: from every 6 hours to every 15 days. |
| 25 | Moling / Drilling up 150 mm dia bore with trenchless method by manual / mechanical means and fixing 150 mm dia MS pipe under the road or any other area in all types of soil including hire & running charges of all equipments, tools, plants and machineries required for the job all complete as per Direction of Engineer-in-charge. |
| 26 | Providing & fixing of sand filter 25m3hr having an inlet & two outlet connection of 2 inch, 2 nos pressure gauze ports of ¾ inch, maximum working pressure of 6 bars made of FRP material free from corrosion. 3 inch X3 inch X3 inch plastic straight flow back flushing 3 way hydraulic drive diaphragm control valve of corrosion proof and long lasting PP material chamber (2Nos), maximum working pressure of 10 bar, 3 way solenoid latches, along with auto back flushing filtration controller DC type 4 station ( time based & pressure differential). Command tube & fittings, automatic Disc filter (120 mesh) 503/hr (battery of two filter) having an inlet & two outlets connections of 3 metallic clamp PN 10 rating complete suction and header assembly complete etc as required |
| 27 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 28 | Providing and fixing 25 mm x 5 mm G.I. strip in 40 mm dia GI pipe from earth electrode including connection with GI nut, bolt, spring washer, excavation and refilling etc. as required. |
| 29 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 30 | Part B (Civil Works)Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.a) All kinds of soil. |
| 31 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth levela) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 32 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:a) Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 33 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :a) Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 34 | Neat cement punning. |
| 35 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 36 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth levela)1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 37 | Centering and shuttering including strutting, propping etc. and removal of form fora) Foundations, footings, bases of columns, etc. for mass concrete |
| 38 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 39 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.a) Hot finished welded type tubes |
| 40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:a) Two or more coats on new work |
| 41 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 42 | 12 mm cement plaster of mix :a)1:6 (1 cement: 6 coarse sand) |
| 43 | 15 mm cement plaster on rough side of single or half brick wall of mix:a)1:6 (1 cement: 6 coarse sand) |
| 44 | Finishing walls with water proofing cement paint of required shade :a) New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 45 | Seel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.a)Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External worka)25 mm nominal dia Pipes |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External worka)50 mm nominal dia Pipes |
| 48 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,\ transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 50 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.A) Using M.S. angels 40x40x6 mm for diagonal braces |
| 51 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 52 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth. |
| 53 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources). |
| 54 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :a) 4.0 mm thick glass panes. |
| 55 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.A)In cement mortar |
| 56 | Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 57 | PART C (Electrical Maintenance)Running maintenance operation of mist pump installed on street light poles and associated items etc as per inventory, terms & condition attached( sector 8)a) operator -2 nos. |
| 58 | b) khallasi - 3 nos. |
| 59 | Hiring charges of tower wagon(l/s) |
| 60 | Modified Estimated Cost after using Correction factor on DSR 2023 on account of GST@ 0.973 (Part B, Civil Work, Sr. No 30 to 56) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender