Tender For External Electrification Work At Ffc Jhandewalan New Delhi.
Tender Value
8.37 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
5 days left
EMD
16750
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for External Electrification Work At Ffc Jhandewalan New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 2.5 sq. mm |
| 2 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders n existing cubicle panel board including drilling holes in cubicle panel,making connections,Ics=100% Icu and Operational Voltage 690 V etc. as required.125 A,36 KA,FPMCCB |
| 3 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A |
| 4 | Supplying and fixing Cable End Box (Loose Wire Box) suitablefor following single pole and neutral, sheet steel, MCBdistribution board, 240 Volts, on surface/ recess, complete withtesting and commissioning etc. as required.For 6 way, Double door SPN MCBDB |
| 5 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 6 | Providing and fixing & 6 SWG dia G.I. Wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/cable as required. |
| 7 | Supplying, Installation, testing and commissioning of of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection,EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) 135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).72 watt |
| 8 | 150 watt |
| 9 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required,but excluding sand cushioning and protective covering.Upto 35 sq. mm |
| 10 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wallsurface as required.Upto 35 sq. mm (clamped with 1 mm thick saddle) |
| 11 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed I XLPE aluminium conductor cable of 1.1 kV grade as required.4 x 25 sq.mm (28 mm) |
| 12 | 4 x 35 sq.mm (32 mm) |
| 13 | Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps,bolts,nuts, etc. as required. |
| 14 | Supplying and fixing of 32 mm dia x 2.00 meters long G.I.pipe (medium class ) bracket for mounting of fluorescent/HPMV/HPSV street light fitting on pole including bending the pipe to the required shape,2 nos 40 mm x 3 mm flat iron with primer and finish paint etc. as required . |
| 15 | Supplying of Following Items for Routine Operation and Maintenance of Electrical Panels situated at Pump House of FFC complex.4pole MCCB, 400A, 50kA,Ics=100% Icu and Operational Voltage 690 V |
| 16 | Supply of G.I. pipes 50 mm dia (medium class) |
| 17 | Supply and fixing of Sheet steel DP MCB enclosure |
| 18 | Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. 16.13.1 bituminous portion (50 mtrx0.25mtrx0.30 mtr) bituminous portion |
| 19 | Supply of following sizes of XLPE ARMOURED Cables with ALUMINIUM Conductor 650/1100 V. grade confirming to IS : 7098 (Part-1) 1988 Complete with all respect4 core X 35 Sq.mm |
| 20 | 4 core X 25 Sq.mm |
| 21 | 2 core X 6 Sq.mm |
| 22 | Painting on MS Pole including sand papering ,one coat of Primer ,onr coat of Aluminium paint Pole numebaring etc as etc as required site. |
| 23 | Supply and fixing of surface mounting totally (500x300x200mm) enclosed compartmentalized, cubical, dust, vermin proof and outdoor type feeder piller fabricated out of 1.6 mm thick , for non load bearing members (doors,panel front side covers etc) sheet steel, with I-43 protection degre, internally strengthened with angle iron frame work with following incoming and outgoing cables with 3 phase indicators(fabricated out of 2 mm CRCA sheet steel,load beraing)for Mountung 4 pole mccb upto 160 A ,2nos 4pole isolatots required a complete. |
| 24 | Supply and Fixing of Hot press moulded Sintex Make SMC Junction Box of Size 300x200x105mm Hinged as complete as required etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender