Tender For Provision Of New Toilet In Mt Area Of Med Regt (Basantar River) At Faridkot Mil Stn
Tender Value
9.04 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
20 days left
EMD
18080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridkot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of New Toilet In Mt Area Of Med Regt (Basantar River) At Faridkot Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cables, DWCP pipesetc. n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified |
| 2 | M&L for PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified |
| 3 | M&L for old size brickwork with fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 complete all as specified |
| 4 | M&L for RCC (1:1½:3) type A-1 (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m , lintel bend complete all as specified |
| 5 | M&L for RCC (1:1½:3) type A-1 (using 20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves complete all as specified |
| 6 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified |
| 7 | Form work to sides and soffits of floor or roof beam, beam, hauchings, girders, bressumemers, lintels, cantilevers, shelves incl supports overhangs etc also splays between floors and beams, flat, rough finished surfaces of concrete complete all as specified |
| 8 | S&F MS TMT Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securining with clip complete all as specified |
| 9 | S&F MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securining with clip complete all as specified. |
| 10 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate), as in flooring, sub base etc complete all as specified. |
| 11 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base, foundation mass concrete etc complete all as specified and directed |
| 12 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregate), as in flooring complete all as specified. |
| 13 | M&L for Brickwork with fly ash brick, straight or curved on plan to any radius in half brick thick walls built in cement Mortar 1:6 etc. complete all as specified and directed. |
| 14 | S&F Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) (coloured tiles) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified and directed |
| 15 | S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work complete all as specified. (Highlighter shall be provided as directed by Engr-in-Charge) |
| 16 | M&L for mild steel framed work of Fe-290 (Gde E-165) as in grills/guard bars shouldered with steel windows/ventilators frames. Cooler stand, ladder etc including red oxide primer coat complete all as specified |
| 17 | S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified |
| 18 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified |
| 19 | S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tined tacks or galvanized wire staples or wooden bead complete all as specified and directed. |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-In-Charge. |
| 22 | S&F 100 mm long, Stainless Steel hinges with stainless steel screws complete all as specified. |
| 23 | S&F 150 mm long Aluminium handles cast type anodised complete all as specified |
| 24 | S&F 125mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified |
| 25 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasps staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified |
| 26 | M&L for Rendering 15mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for Rendering 10 mm thick in cement plaster 1:3 on ceiling finished even and smooth without using extra cement complete all as specified |
| 28 | M&L for Rendering 15 mm thick in cement plaster 1:4 on surface other than fair face of brickwork or stone masonry surfaces or on one side of lathing, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for preparation of new plastered Internal wall surface and applying followings complete all as specified and directed :- (a) Applying 1mm thick wall care putty on wall surface and smoothening the surface prepatory to paint. (b) Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work |
| 30 | M&L for preparation of newly plastered surfaces of ceilings and applying two coat of OBD complete all as specified and directed. |
| 31 | M&L for preparation of new external plastered wall surface and applying followings complete all as specified and directed:-(a) Applying 1mm thick wall care putty on wall surface and smoothening the surface prepatory to paint.(b) Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm |
| 32 | M&L for 50mm thick Cement concrete 1:3:6 type C-2 (using 20mm graded aggregate) as in plinth protection/ path finishing surfaces even and fair (without using extra cement) complete all as specified |
| 33 | M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection/ path finishing surface even and fair complete all as specified and directed. |
| 34 | Supplying and laying of CPVC pipes ISI SDR 11 pipe 20mm dia with all fittings solvent and fixed to wall and Ceiling/ Concealed or laid in floor, bore of pipe 20mm including all fitting (Brass/CPVC) as required except item 38, 39, 40, 41 complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F of 15/20 mm inner dia CPVC Brass Male/ Female Brass Threaded Adaptor fittings complete all as specified |
| 36 | S&F 15/20 mm inner dia CPVC Brass Elbow fittings complete all as specified |
| 37 | S&F 15/20 mm inner dia CPVC Brass Tee fittings complete all as specified |
| 38 | S&F 15/20 mm inner dia CPVC Brass Tank Adapter fittings complete all as specified |
| 39 | S&F 20mm Gun-metal, globe or gate valves/UPVC valve with , screwed both ends for pipe and fixed |
| 40 | S&F 15 mm fancy type chromium plated Angle valve/stop valve, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 41 | S&F 15mm bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified |
| 42 | S&F 15mm fancy type chromium plated pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified |
| 43 | S&F Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, PVC 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified |
| 44 | S&F Vitreous china wash down water closet pan (pedestal pattern), white including PVC 'P' or 'S' trap, Cover and fixing bolts, complete all as specified and directed. |
| 45 | S&F 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified |
| 46 | S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, painting around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, including water coupling of PTM suitable for urinals (inclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed |
| 47 | S&F vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 48 | S&F PVC Connections 15mm size with PTMT nuts of length 450mm complete all as specified |
| 49 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified |
| 50 | M&L for 20mm thick granite(of any type ) work (table rubbed and polished) in steps, jambs pillars windows cills cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified |
| 51 | S&F in Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified |
| 52 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including fixing clamps with nut and bolts including taking down existing pipe complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F 110mm bore PVC (SWR) bends with or without shoe / with or without access door any radius fixed to walls including distance pieces and fixed with shaddle complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to floor including fixing clamps with nut and bolts including taking down existing pipe complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F 75mm bore PVC (SWR) bends with or without shoe / with or without access door any radius fixed to walls including distance pieces and fixed with shaddle complete all as specified and directed by Engineer-in-Charge. |
| 56 | M&L for PVC (SWR) Floor trap long neck 75 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) etc fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F 75mm PVC (SWR) vent cowls Complete all as specified and directed. |
| 58 | S&F Rotational moulded polythylene 1000 capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including PVC float valve 20 mm bore, high pressure with polythene ball & float complete all as specified |
| 59 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified |
| 60 | Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified |
| 61 | M&L for Roof Treatment as specified below and as directed : (a) Cleaning, washing of surface and removing all existing bitumen coatings/ APP membrane completely with intense wire brushing or high speed water jet. Surface should be free from any loose paint, dust or grease. (b) Rendering 10 mm thick in cement plaster 1:4 with WPC on roof, fair faces of brick work or concrete surfaces all as specified (c) All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars. (d) Applying one coat of PrimeSeal/ Epoxy Primer/ShaliUrethane BTD White diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ Sqm (0.20 kg BTD+0.20 Kg water) (e) Laying polyster reinforced fiber net/50 gsm Geotextile mesh, upto 300 mm on walls. (f) Applying three coat of HydroShield PUD microfibre reinforced UV resistent polyurethane (solid content 68%) / Damp Proof ultra UV Stable fibre reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers (Solid content 55%)/ SmartCare PU Magnum elastomeric waterproofing coating based on hydrophobic polyurethane (solid content 85%)/Single Component Elastomeric Liquid Membrane ShaliUrethane BTD White/coloured (Elongation 400% ± 50, Solid Contents > 80% & Specific Gravity @ 30 OC 1.5 ± 0.03) @ total 2.00 Kg per Sqm in two coats for maintaining thickness of 1.5mm, with paint brush/ roller upto 300 mm on walls. (g) The complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Make : DrFixit/ Asian/STP Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment |
| 62 | Supply and laying for DWCPE pipe 150mm dia complete laid and jointed with collars complete they are laid and tested complete all as specified and directed |
| 63 | M&L for concrete bed 1:3:6 type C2 150mm thick to drain pipes of 150mm (internal dia) including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed |
| 64 | M&L for 25mm thick sand filling under floors in foundation including watering and consolidation as required complete all as specified and directed. |
| 65 | M&L for machine pressed pre-cast concrete interlocking paver block with grey cement and no pigment any shape & size conforming to IS-15658-2006 of 60mm thickness M35 grade laying above sand cushioning surface etc complete all as specified and directed. |
| 66 | M&L for Hardcore of broken boulders/ stone gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge. |
| 67 | M&L for Point wiring complete with ISI marked 2.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through & including PVC rigid concealed conduit suitable size with all accessories bend, reducers, MS hooks, MS junction boxes, terminal boxes & including Modular steel terminal boxes factory made and white cover modular plate with frame suitable for (modular switches, sockets, modular fan regulator) and including fixing and 2.5 sqmm copper conductor as earth continuity to connect common earth dolly complete for One light point/Fan point/Exhaust point /bell point controlled by one way switch all as specified and directed by Engr-in-Charge |
| 68 | All as per Srl Item No.67 here-in-before but One three pin socket out let 5 amps on the same board with other switches |
| 69 | S&F Modular switch single pole 1 way 6 amps, 1 Module 230 volt AC supply complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F Modular socket two in one 2/3 Pin 6 Amps 2 Module 230 volt AC supply complete all as specified and directed by Engr-in-Charge. |
| 71 | M&L for ceiling rose 3 terminal/ PVC/ polycarbonate isolated body complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F of MCB DB confirming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed . |
| 75 | S&F of LED tube light fitting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F of LED tube light fitting 10W, (2 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size complete all as specified and directed by Engr-in-Charge |
| 77 | S&F exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fasteners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. |
| 78 | S&F in replacement energy efficient LED Security light fitting of 35W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, with all accessories complete all as specified and directed by Engr-in-Charge |
| 79 | S&F in replacement of street light fitting bracket, 1.0 mtr long bent to shape made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as specified and directed by Engr-in-Charge. |
| 80 | M&L for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel & wiremesh, PCC chamber in cement concrete (1:2:4) type B1 including 40mm thick pre-cast RCC (1:2:4) type B0 cover and 40x40x6mm angle iron frame on top of pit cover and excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed by Engr-in-Charge. |
| 81 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed |
| 82 | Supply and laying double wall corrugated pipe (DWC), non-metallic, Resistance to Compression : Type 450, Resistance to Impact: Normal, Resistance to Bending : Pliable, Resistance to External Influence: Ingress Protection : IP 67, Resistance against Corrosion : Without Protection, Resistance to Flame Propagation : Non Flame Propagating, Nominal outside diameter 77 mm, minimum inside dia 63 mm conforming to IS 16205 (Part 24) : 2017 complete all as specified and directed. |
| 83 | M&L for cutting existing CI/ DI pipe 80MM bore branch GI pipe line 80 mm bore and inserting tee including all accessories complete all as specified and directed. |
| 84 | S&F GI Pipe 40mm bore Medium grade and including GI Fitting in Trenches/on Wall or Laying in floors complete all as specified and directed. |
| 85 | S&F GI Pipe 20mm bore Medium grade and including GI Fitting in Trenches/on Wall or Laying in floors complete all as specified and directed. |
| 86 | S&F GI Pipe 25mm bore Medium grade and including GI Fitting in Trenches/on Wall or Laying in floors complete all as specified and directed. |
| 87 | S&F GI Pipe 50mm bore light grade and including GI Fitting in Trenches/on Wall or Laying in floors complete all as specified and directed. |
| 88 | S&F Gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe & fixed 25 mm bore of pipe complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender