Tender For Addition Alteration To Certain Md Accommodation At Af Stn Ad Ur
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
1 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Certain Md Accommodation At Af Stn Ad Ur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | B/R Works |
| 2 | M&L for providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed . |
| 3 | M&L cement concrete (1:5:10) type E-2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.(sunken portion) complete all as specified and directed. |
| 4 | M&L for RCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and shown on drgs. |
| 5 | Supply only integral water proofing compound complete all as specified and directed. |
| 6 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 7 | All as per item No. 6 above here-in-before but except bricks. |
| 8 | M&L for cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed. |
| 9 | M&L for granite 15-18 mm (of any type) work (table rubbed and polished) thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20 mm thick screed bed in CM (1:6) for laying of granite slab & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all spd and directed. |
| 10 | M&L for formwork to ,rough finished surfaces of flat concrete,soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),etc complete all as spd and directed. |
| 11 | S&F 35 mm,2nd class hard wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as spd and directed. |
| 12 | S&F or factory made 2nd class hard wood rail and style, thicknesss of shutters,35 mm, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,etc complete all as specified and directed. |
| 13 | S & F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , complete all as spd and directed. |
| 14 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each and removing to or from store complete all as specified and as directed by the Engineer-in-Charge |
| 15 | Taking down, Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame),etc and removing to or from store complete all as spd and directed. |
| 16 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified. |
| 17 | Taking down, easing, adjusting of old wooden shutters of any description exc. 1 Sq,m and not exc. 2 Sq.m each and refixing in same opening after tiling work complete all as directed by EIC. |
| 18 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded wood grain PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styiles and wood grain colour PVC sheet for top rail, lock rail and bottom rail, panelling of wood grain colour PVC sheet to be fitted in the MS frame welded / sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement as specified in SSR Part II, complete all all as specified. |
| 19 | S&F Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain finished colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete all as specified. |
| 20 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed by Engineer-In-Charge. |
| 21 | S&F for 300 mm long , Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, etc complete all as spd and directed. |
| 22 | S&F for Butt hinges, extruded Stainless steel with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinges in 100 mm, etc complete all as spd and directed. |
| 23 | S & F 300 mm long mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed by engineer incharge |
| 24 | S&F 125 mm size, aluminium anodized handles, cast type complete all as specified and directed by Engineer-In-Charge. |
| 25 | S&F in repair Stainless steel conduit 20 mm bore, cut to size and erected in position including provison SS brackets & SS decorative type finial (Two nos for each opening) complete all as apecified and directed. |
| 26 | S&F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 27 | S&F for Stainless steel wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, etc complete all as spd and directed. |
| 28 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;frame structure; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 29 | S & F Mild steel TMT bars 10mm dia and over , cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 30 | S & F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 31 | S & F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 165 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and as directed. |
| 32 | Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and as directed . |
| 33 | M&L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations etc complete all as specified and directed. |
| 34 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and directed. |
| 35 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sq. metre, etc completed all as specified and directed. |
| 36 | M&L for 7 to 8 mm thick Coloured Glazed ceramic tiles of size 200 mm x300 mm and pattern as approved by Engr-in-charge , as in vertical surface such as skirting , dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat of 10 mm thick in cement mortar 1:4 completed all as specified and directed. |
| 37 | M&L for Coloured Glazed ceramic tiles in vertical surface of size 600mmx300mm and 6-7 mm thick of colour and pattern as approved by Engr-in-charge , set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat completed all as specified and directed. |
| 38 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 |
| 39 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 completed all as specified and directed. |
| 40 | Dismantling floor, hearth or wall tiling or stone chips including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc completed all as specified and directed. |
| 41 | M&L for rendering 10 mm thick on brick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and directed. |
| 42 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface finished fair & even in CM 1:6 complete all as specified and directed. |
| 43 | M&L for 15 mm thick rendering in 1:4 CM with using 3% WPC as in sunken portion completed all as specified and directed. |
| 44 | M&L for rendering 15 mm thick on fair faces of brick wall with mixing WPC @ 3% by wt of cement finished fair & even in CM 1:4 upto three storey complete all as specified and directed. |
| 45 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 46 | M&L for prepration of newly plastered wall surfaces of any description complete all as specified and applying Two coats of interior acrylic distemper over and including a coat of wall care putty and acrylic emulsion primercomplete all as specified and directed. |
| 47 | M&L for two coat of white wash on old wall surfaces, including preparation of surfaces, complete all as specified and directed. |
| 48 | M&L for complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying Two coats of interior acrylic distemper over and including a coat of wall care putty and acrylic emulsion primer complete all as specified and directed. |
| 49 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed. |
| 50 | M&L for one coat of white wash on old ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 51 | Supplied only for 4 mm thick,Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane,etc completed all as specified. |
| 52 | Supplied only for 4 mm thick,Figured glass, pin head type in squares n exc 0.5 sq.m each pane,etc complete all as specified and directed. |
| 53 | Preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 54 | M&l for applying one coat (finishing coat) of synthetic enamel paint, including preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and complete all as specified and directed. |
| 55 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer. |
| 56 | M&L for applying one coat (finishing coat) of synthetic enamel paint including peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth, complete all as specified. |
| 57 | S&F in repair GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors 15mm bore complete all as specified and directed. |
| 58 | S&F in repair tubes 20 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floos, complete all as specified and directed. |
| 59 | Taking down 15 mm dia GI steel tubing and connection, including cleaning for refixing or removal, completed all as specified and directed. |
| 60 | Taking down 20 mm dia GI steel tubing and connection, including cleaning for refixing or removal, completed all as specified and directed. |
| 61 | Dismantling water tanks P.V.C. or R.C.C. capacity exc 250 ltr & n exc 500 ltr and removing to store,etc completed all as spd and directed. |
| 62 | S&F 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical verical with closed top) hoisted and fixed in position complete all as specifed and directed. |
| 63 | Disconnecting existing tanks, Capacity exc. 250 ltr but not exc. 500 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed. |
| 64 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 65 | S&F in repair Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 66 | S&F in repairs stop cock/angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 67 | S&F in repairs concealed stop cock type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 68 | S&F for Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, Bore dia of pipe in 20 mm, etc complete all as specifed and directed. |
| 69 | S&F in repair grating doom 100mm dia size with PTMT complete all as specified and directed. |
| 70 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and as directed. |
| 71 | S&F in repair for 100mm cast iron sanitary P or S trap to fit WC out-let, etc complete all as specifed and directed. |
| 72 | S&F in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors , bore of pipe in 75 mm, etc complete all as specifed and directed. |
| 73 | S&F in repair for PVC (SWR) bends any radius, bore of pipe in 75 mm, etc complete all as specifed and directed. |
| 74 | S & F in repair for 75 mm cast iron sanitary connections short connections pipe of length upto 300 mm, etc complete all as specifed and directed. |
| 75 | S&F in repair for 100 mm cast iron sanitary connections short connections pipe of length upto 300 mm, etc complete all as specifed and directed. |
| 76 | S&F in repair 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) complete all as specified and directed. |
| 77 | S&F in repair 75mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) complete all as specified and directed. |
| 78 | S & F for PVC (SWR) pipes single socketed, in any length with or without rubber ring joints, fixed to walls, bore of pipe in 150 mm, etc complete all as specifed and directed. |
| 79 | S&F in repair for PVC (SWR) bends/shoe any radius, bore of pipe in 150 mm, etc complete all as specifed and directed. |
| 80 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe etc. complete including making good to floor,complete all as specified and directed. |
| 81 | S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm aps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 82 | S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 83 | S&F in repair Stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug , waste pipe ,washers including cantilever cast iron brackets, connecting union etc overall size 940mm x 460mm x 203mm with bowl size 405mm x 354mm x 203mm complete all as specified and directed. |
| 84 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, flush pipe, waste pipe & brackets complete set complete all as specified and directed. |
| 85 | S & F in repair 600 mmx 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 86 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as directed. |
| 87 | Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete, etc complete all as spd and directed. |
| 88 | Demolition of reinforced cement concrete as in chimney, Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as spd and directed. |
| 89 | M&L for applying two coats of two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smartcare Ultra block 2K or equivalent, having 215% elongation as per ASTMD-2370, resisting 5 bars hyrostatic pressure as per DIN 1048, crack briding upto 3.50 mm as per EN 1062-7 and sprinkling dry fine sand over wet second coating complete, as per maunfactures specifications.NOTE: - Unless otherwise recommended by manufacturer, the mixing ratio of the components shall be 6 parts of powder and 4 parts liquid without any water addition in the mixing, etc. |
| 90 | Cleaning the surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expantion contraction. Cutting the grooves with suitable cutter machine in \\"v\\" groove filled with Repair mortar/Microconcrete/General purpose grout as recommended proportionaly as per recommendation of manufacturer and applying FOSROC nitoproof 650PU over a priming coat of FOSROC Nitoproof WB primer or equivalent product of asian paints, M/s MC Bauchemie/CIPY/ SIKA/ Pidilite/ DR Fixit/ Thermex STP applied as per manufacturers instructions. Further provide a polypropylene/ polyster non woven geotextile fabric of 150 GSM. Followed by cement screed 15mm in CM (1:4) in slope, over that 20mm thick Teracotta burnt tiles are laid. While laying the tiles, care should be taken to see that joints are throughly filled with FOSROC Nitotile grout polymer based joint mortar or equivalent product of asian paints M/s MC Bauchemie/CIPY/ SIKA/ Pidilite/ DR Fixit/ Thermex STPas per manufacturers instructions.Note: Brick tiles should be measured and paid separately in respective item. |
| 91 | Supply and fixing heat resistant terrace tiles (300mm x 300mm x 20mm) with SRI (solar refractive index)> 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 and grouting the joints with Epoxy mix , including rubbing and polishing of the surface upto 3 cuts complete , including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 92 | M&L for M 20 cement concrete 1:1.5:3 type A1 (20 mm graded aggregate)as padding in roof including necessary formwork as specified. |
| 93 | M&L for cement concrete 1:2:4, type B0, using 12.5 mm aggregate providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as spd and directed. |
| 94 | S&F Steel windows made of MS sheet 1.25 mm thick box type (primer coated) ERW hollow ‘P’ section of size 60 mm x 25 mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1 mm thick & openable leaf consisting two Nos sash bars of ‘T’ section 20 x 3 mm complete welded to frame including cutting holes & making good dismantled portion in PCC 1:2: 4 type B1 four Nos for each window including following fitting welded to shutter ;- (a) Hold fast 150 mm long 12 mm x 3 mm made to shape -04 Nos(b) Handle of ‘Z’ section 20 x 25 mm , 100 mm long 01 Nos each leaf.(c) MS tower bolt 150 mm long 02 Nos each leaf.(d) ‘Z’ section 20 x 25 mm , 100 mm stopper-01 Nos each leaf.(e) Cleat 55 mm long of hollow square 15 x 20 x 63 mm welded to hinges-01 Nos per leaf.(f) MS box type hinges of size 75 x 12 mm -02 Nos per leaf.(g) Fabrication & fixing complete. |
| 95 | All as per item above here-in-before but without sash bars complete all as specified and directed. |
| 96 | S&F floor door stopper of aluminium alloy body double leg 75-80 mm long with rubber stopper at bottom complete all as specified and directed. |
| 97 | S&F in repair 450 mm long Glass Shelf fixed with and including chromium plated brass screws and wooden/ plastic cleates complete all as specified and directed. |
| 98 | S&F in repair steel plate rack made of stainless steel 0.61 mm thick over all size 600mmX750mm complete allas specified and directed by Engineer-in-charge. |
| 99 | S&F in repair Stainless steel Soap dish complete all as specified and directed. |
| 100 | Prepration of newly plastered wall surfaces of any description complete all as specified and applying Two coats of exterior acrylic emulsion over and including a coat of exterior (water based) primercomplete all as specified and directed. |
| 101 | Uprooting tree/plants upto 30 cm girth from wall or any part of building upto double storey buildings completly to the entire satisfaction of Engineer-in-Charge, making good the disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-1 using 20mm graded stone aggregate to match with existing surfaces and removal of rubbish outside MOD land complete all as specified and directed. |
| 102 | Dismantling Brick tiles or terracing tiles, single layer on roofs, etc complete all as specified and directed. |
| 103 | Demolition of mud puska in roof any thickness incl plastering & leeping removed complete all as specified and directed. |
| 104 | E/M Works |
| 105 | Taking down copper/aluminium point wiring (light, fan , socket or power) complete including fixtures and fittings such as switches, ceiling rose, pendant ,regulators,sockets,light fittings etc.removing materials to store for keeping in safe custody or for taking credit (credit for items shall be made as per conditions separatly) and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed. |
| 106 | M&L for pointing wiring with 1.5 sqmm (nominal area) PVC insulated FRLS H, unsheathed, multistrand, 1100 volts grade copper conductor cable single core drawn through in and including non metallic concealed PVC conduit medium grade of suitable dia as per SSR specification and its accessories including one run of 1.5 sqmm PVC insulated copper conductor cable green in colour for continuous earthing including MS terminal box flushed to wall with 3mm thick laminated hylem sheet top cover for fixing of switch/socket etc all as specified. Note:- surface conduit shall be laid in ceiling portion only. |
| 107 | One light/ceiling fan/exhaust fan /call bell point controlled by one switch. |
| 108 | One 3 pin 5 amps socket point on independent board |
| 109 | One 3 pin 5 amps socket point on same board |
| 110 | One light point controlled by 2 Nos two way switches |
| 111 | All as per item No.106 here-in-before but size of copper conductor 2.5 sqmm for 3 pin 15 Amps switch socket outlet (power point) complete all as specified and directed. |
| 112 | S&F Switch piano, flush type single pole, one way 6 Amps complete all as specified and directed. |
| 113 | S&F Switch piano, flush type single pole, two way 6 Amps complete all as specified and directed. |
| 114 | S&F Switch Bell push Flush type 6 Amps complete all as specified and directed. |
| 115 | S&F Socket outlet 2 in 1,3 pin, 6 and 16 Amps flush type complete all as specified and directed. |
| 116 | S&F Switch Piano flush type, single pole, one way 16 Amps complete all as specified and directed. |
| 117 | S&F Socket outlet 2 in 1,3 pin, 6 Amps flush type complete all as specified and directed. |
| 118 | S&F Ceiling rose, 03 terminal, PVC/polycarbonate isolated body complete all as specified and directed. |
| 119 | S&F Lamp holder PVC/carbonate type with back plate complete all as specified and directed. |
| 120 | S&F Fan regulator electronic stepped type, flush type (Socket/Switch type) complete all as specified and directed. |
| 121 | S&F Call bell AC, 230 volts , Ding Dong/Buzzar complete all as specified and directed. |
| 122 | S&F in repair LED light fitting 1x10W bulkhead luminaires including LED light connecting up with three core flexible copper conductor cable of suitable size. |
| 123 | M&L for Submain wiring alongwith PCV insulated unsheadhed multi stranderd copper conductor cable of size 2x6.00 sqmm+1x6.00 sqmm earth wire FRLS in and including 20 mm dia non metalic concealed/on surface PVC conduit complete all as specified and directed. |
| 124 | S&F (Load line) sheet metal enclouser (DB) duble door triple pole and netural 4 way, 415 volt with 200 Amps rated bus bar in and including MCCB 4 pole 63 Amps, 16 KA, 415 Volts complete all as specified and directed. |
| 125 | S&F sheet metal enclouser (DB) double door single pole and netural 12 way,240 volt with 200 Apms rated bus bar complete all as specified and directed. |
| 126 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete including one single pole MCB 20 Amps complete all as specified and directed. |
| 127 | S &F MCB SPN 32 Amps, C Curve (10KA) complete all as specified and directed. |
| 128 | S&F MCB SP 6-32 Amps, B Curve (10 KA) complete all as specified and directed. |
| 129 | S&F in repair LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed. |
| 130 | S&F in repair LED mirror light fitting with high out put diffuser 2 feet, 10 watt 220 V AC batten type with driver holder including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed. |
| 131 | Material & Labour for earthing complete with Galvanised steel earth plate electrode of size 600x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 m below normal ground level), with top edge of earth plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (medium grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1 (using 20mm graded aggregate) and pre-cast RCC cover slab of suitable size, reinforced with 8mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar, funnel, wire mesh 20 mm bore galvanised (medium grade) for watering, charcoal and salt in alternate layers including necessary execution and earth work in any type of soil complete. NOTE:-(a) The unit rate includes earthing lead and proctection pipe upto 7.5 metre from top of earth plate.(b) Factory made PCC pit with RCC cover shall be fixed at least 500mm away from the earth pit.(c) Earth resistance should be less than five Ohm. In case the test results are not found below five Ohm, complete earthing shall be redone by contractor without any extra cost to Govt . |
| 132 | Taking down carefully electric geyser any type any capacity, depositing in MES store yard till the work in progress and refixing the same as its original position. |
| 133 | Taking down carefully exhaust fan any type any capacity, depositing in MES store yard till the work in progress and refixing the same as its original position complete all as specified and directed. |
| 134 | Taking down carefully ceiling fan, sealing cable end, dismantling blades and removing fan and blades to MES store yard till the work in progress and refixing the same as its original position complete all as specified and directed. |
| 135 | Supply and fix exhaust fan made of steel body, heavy duty complete with louvers shutter, voltage 230V, 50 Hz, RPM 1400, Copper winding of sweep 300mm complete all as specified and as directed. |
| 136 | Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 daySep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender