Tender For Comprehensive Maintenance To Md Accommodation Under Age B/R-Ii Of Ge(S) Mamun
Tender Value
27.50 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
55000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance To Md Accommodation Under Age B/R-Ii Of Ge(S) Mamun
BOQ
| Sl. No. | Item Description |
| 1 | M&L for 18 mm thick green marble (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4,including demolition of existing marble, complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tilling and terrazo topping incl cement mortar bedding ( but not backing) removing serviceable tiles to stores and rubish off the premises, complete all as specified and directed. |
| 3 | M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed. |
| 4 | M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick cement screed in cement mortar 1:6, complete all as specified and directed . |
| 5 | M &L for Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in skirting etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:4, complete all as specified and directed . |
| 6 | M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 7 | M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors, surface finished even & rough to receive floor top finish complete all as specified and directed. |
| 8 | S&F in repairs Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms complete all as specified and as directed. |
| 9 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed. |
| 10 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed. |
| 11 | Taking down shutters of any description area exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed. |
| 12 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 50 x 125 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 14 | S&F 35 mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc.; sizes of me-mbers of shutters as specified fitted to chowkats including preparation of surfaces of shutters and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed. |
| 15 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative both sides Flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative decorative both sides Flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 17 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 18 | S & F 150mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 19 | S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 20 | S&F in repair 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 21 | S&F 250 mm long aluminium alloy , anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 22 | S&F in repairs 250 mm long aluminium alloy , anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 23 | S & F 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 24 | S & F in repair100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 25 | S&F 150 mm long aluminium handle cast type anodised complete all as specified and directed. |
| 26 | S&F in repairs 150 mm long aluminium handle cast type anodised complete all as specified and directed. |
| 27 | Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed. |
| 28 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 29 | S&F 3mm thick Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed with oil putty complete all as specified and directed. |
| 30 | S & F GI wire cloth,0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed. |
| 31 | S&F in repairs GI wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed. |
| 32 | S&F 300mm size mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 33 | S&F in repair 300mm size mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 34 | M&L for preparation of old decorated surfaces of ceiling of any description by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed. |
| 35 | M&L for preparation of old decorated surfaces of walls of any description by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of white wash complete all as specified and directed. |
| 36 | M&L for preparation of old decorated surfaces of walls of any description and applying one coat of oil bound distemper, white or tinted, including removing nails etc and making good the disturbed surface complete all as specified and directed. |
| 37 | M&L for complete removal of existing treatment, preparation of surfaces, applying 1mm thick wall care putty making the surface even & smooth and applying two coats of oil emulsion distemper over complete all as specified and directed. |
| 38 | M&L for preparation of old painted surfaces of wood or wood based articles of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, white or tinted, complete all as specified and directed. |
| 39 | M&L for preparation of old painted surfaces of steel or iron of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, tint as approved,complete all as specified and directed. |
| 40 | Taking down cement plaster from brick / stone /concrete walls including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed |
| 41 | M&L for rendering 15mm thick cement plaster in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | M&L for rendering 10 mm thick plaster on fair face of brick work or concrete surface as in ceiling in cement mortar 1:3, finished even and smooth without using extra cement, including necessary scaffolding complete all as specified and directed. |
| 43 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed. |
| 44 | M&L for preparation of new plastered surfaces of ceiling of any description , and applying three coat of white wash complete all as specified and directed. |
| 45 | S & F in repair 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 455gm complete all as specified and directed |
| 46 | S&F in repair Shower rose swivel type brass chromium plated any size including fixing to steel pipe or unions complete all as specified and as directed. |
| 47 | S&F in repair Stop valve/Angle valve (ISI Marked), fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and as directed. |
| 48 | S&F in repair stop valve (ISI Marked) 15 mm bore fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed. |
| 49 | S&F in repairs 15mm bore bib tap, with flange, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 50 | S&F in repairs 15mm bore PTMT bib tap, any colour, high pressure screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 51 | S & F in repair Flush pipe (PVC) squatt pattern closet including all joints and making good to the floor complete all as specified and directed. |
| 52 | S&F in repairs vitreous china wash hand basin flat back or angle back type, white of bowl size 550mm x 400mm including CP brass waste coupling and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe of 32mm dia, complete all as specified and directed. |
| 53 | S&F in repairs 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 54 | S&F in repairs Brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed. |
| 55 | S&F in repairs Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed. |
| 56 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting etc, complete all as specified and directed. |
| 57 | S&F in repairs PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed. |
| 58 | S&F in repairs 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed. |
| 59 | S&F in repairs 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed. |
| 60 | S&F in repairs 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed. |
| 61 | S&F in repairs 75mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed. |
| 62 | S&F PVC (SWR) floor trap, plain with grating of 75/100mm dia including jointing with solvent cement all as specified |
| 63 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe. |
| 64 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe. |
| 65 | S&F GI pipe 25mm dia light grade (in short length) as spout pipe in sunken floor slab laid in slope to brick wall with PCC (1:2:4) type B-1, complete all as specified. |
| 66 | M&L for cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, sunken floor, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs incl demolition of existing concrete etc complete all as specified and directed |
| 67 | S&F in repairs sheet glass shelf assembly, consisting of 5.5 mm thick sheet glass 12 cm wide with CP brass bracket, complete all as specified and directed. |
| 68 | S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and directed. |
| 69 | M&L for 75 mm thick cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate as in plinth protection finished even and smooth using extra cement (incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed. |
| 70 | S&F in repairs 20mm bore stainless steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed. |
| 71 | S&F in repairs syphonic action kit for 10 litres capacity PVC flushing cistern, complete all as specified and directed. |
| 72 | S&F in repairs Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed. |
| 73 | S&F in repairs 32/40mm CP waste coupling for sink complete all as per specified and directed. |
| 74 | S&F and fixng 18 mm thick made N.F.C. (Natural Fiber Composite) Board for backing of Cup Boards and Bathroom/ Kitchen Cabnites etc. of required size having minimum 40% high strength plant derived fibers, consisting of thermoset polymers, non-toxic additives (minimum toxicity index of 12 for 100Gms), having density of 650Kg/cum. Modulus of elasticity (3,4), screw withdrawl strength of 1800N (Face) and 900N (Edge), having interlaminar shear strength and thermal stability, all as per specification of the manufacturer and direction of Engineer-in-Charge including dismantling existing boarding. |
| 75 | S&F 30 mm flap Continuous (piano) hinges, mild steel, bright finish or lectrogalvanised complete all as specified and directed. |
| 76 | M&L 100 mm Hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws. |
| 77 | S&F in repairs 32/40 mm dia, corrugated waste pipe suitable for WHBs/sinks including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed. |
| 78 | S&F in repairs 32/40mm PTMT waste coupling for basin/sink (half or full threaded) complete all as per specified and directed. |
| 79 | S&F ball catcher with proper magnetic effect fixed with shutter, complete all as specified and directed. |
| 80 | Supply and fixing as in repair fancy type looking mirror of overall size 600mm x 450mm of bevelled edges, made out of selected quality glass of 6mm thick mounted on 6mm thick building board or commercial plywood & fixed to wooden plugs with Stainless Steel brackets & Stainless Steel fancy type screws & locking washers at 04 corners complete all as specified and directed. |
| 81 | M&L for 20mm thick cement plaster on concrete surfaces of roof top in cement mortar 1:4 finished even and smooth using WPC liquid as per manufacturer instruction @ 200ml /50 kg of cement after sweeping/brushing clean & washing down with water incl taking down existing plaster complete all as specified & directed.Note : GI pipe of any dia on roof srfaces to be desmenteled befor application of WPT and refix in the same position and the rates for desementeling and refixing deemed to be included in above rate |
| 82 | M& L preperation of accessible roof surface by scrapping and properly cleaning the existing roof treatment in any number of layers upto original RCC roof top surafce. Apply first coat Fiber reinforced Elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres with sun reflective index(SRI) of 100-110 , hsving minimum elongation of 350% tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resisit 10 bars of hydrostatic pressure reduce surface temperatureuoto 10 degree celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3 mm thickness weave in leno pattern having 45 gsm/Sqm and pasting it properly iwith overlap of 50mm and aloow it toodry.Apply second of undiluted coat @4.5 Ltr/Sqm. Apply third and final co for 10mm thick cement rendering in CM 1:E168at undiluted @0.45 ltr/sqm. Aplly third and final coat [email protected]/Sqm as directed by Engr in Charge.(a) M&L for 10mm thick cement rendering in CM1:3 and finishing the surface even and smooth before application of priming coat complete all as specified and directedNote : GI pipe of any dia on roof srfaces to be desmenteled befor application of WPT and refix in the same position and the rates for desementeling and refixing deemed to be included in above rate Please Enable Macros to View BoQ information |
| 83 | M& L preperation of accessible roof surface by scrapping and properly cleaning the existing roof treatment in any number of layers upto original RCC roof top surafce. Apply first coat Fiber reinforced Elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres with sun reflective index(SRI) of 100-110 , hsving minimum elongation of 350% tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resisit 10 bars of hydrostatic pressure reduce surface temperatureuoto 10 degree celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3 mm thickness weave in leno pattern having 45 gsm/Sqm and pasting it properly iwith overlap of 50mm and aloow it toodry.Apply second of undiluted coat @4.5 Ltr/Sqm. Apply third and final co for 10mm thick cement rendering in CM 1:E168at undiluted @0.45 ltr/sqm. Aplly third and final coat [email protected]/Sqm as directed by Engr in Charge.(a) M&L for 10mm thick cement rendering in CM1:3 and finishing the surface even and smooth before application of priming coat complete all as specified and directedNote : GI pipe of any dia on roof srfaces to be desmenteled befor application of WPT and refix in the same position and the rates for desementeling and refixing deemed to be included in above rate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender