Tender For Addition Alteration To Building No P-570 And T-388 At Hisar Mil Stn Under Ge (W) Hisar
Tender Value
33.70 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
14 days left
EMD
67400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Building No P-570 And T-388 At Hisar Mil Stn Under Ge (W) Hisar
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in trenches n. exc 1.5m wide and n. exc 1.5m in depth etc in soft/loose soil and getting out complete all as specified and directed. |
| 2 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and directed. |
| 3 | Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level exceeding 1.50m from the starting point, complete all as specified and directed. |
| 4 | M&L for hard core of broken bricks of gauge nexc 63mm deposited and spread and levelled in layers nexc 15cm tick watered and rammed to a true surface and complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 type D2 using 40mm graded stone graded aggregate as in mass concrete ,foundation.ans as subbase complete all as specified and directed. |
| 6 | M&L for demolition of brickwork complete all as specified and directed. |
| 7 | M&L for brick work with fly ash bricks,straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 8 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Notes : 1 the quoted price is inclusive of providing grooves as per existing pattern. 2 Curing of plastered surface shall be carried out for the required period as per standard specifications. |
| 9 | M&L for precast cement concrete louvres and jallies,using 12.50mm aggregate Type C-0, set in cement mortar (1:6), 25mm thick (measured solid), including all mouldings and including precast frame pillar as per required shape and size complete all as specified and directed. |
| 10 | M&L for precast post for jafri jalli of size 50 mm x 50 mm and of 1:2:4 type B-0 (12.5 mm graded aggregate) of decorative type having size as per required height and complete all as specified and directed. |
| 11 | M&L for preparing new plastered surface of walls/jafri jali and applying two coats of weather proof paint complete all as specified and directed. |
| 12 | Excavation in post holes each n. exc .50 cum, getting out in soft/loose soil and removing surplus material n. exc 50 meter and making good disturb surfaces complete all as specified and directed. |
| 13 | M&L PCC 1:4:8 type D-2 as in foundation of posts and struts complete all as specified and directed. |
| 14 | M&L for plain cement concrete type C-2 1:3:6 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 15 | M&L 10 mm dia baluster running bar for fixing of chain link fencing with post complete all as specified and directed. |
| 16 | S&F MS work in posts and struts in fencing including cutting tops to shape as directed , drilling holes notching for wire etc, flat iron fillets for securing wire mesh including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 17 | S&F 10mm dia 75mm long MS screw bolt machine made with hexagonal or Square head at one end and screwed the other,screwed end fixed with washer complete all as specified and directed. |
| 18 | Supply only GI Chain link fencing, any dia,any size or type complete all as specified and directed. |
| 19 | Fixing only GI chain link fencing of any dia, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed. |
| 20 | M&L two coats of synthetic enamel paint over red oxide primer on new steel surfaces of any description over 10 cm in width or girth not otherwise described including preparation of surfaces complete all as specified and directed. |
| 21 | M&L one coat of red oxide primer on new steel surfaces of any description not exc 10 Cm in width or girth including preparation of surfaces complete all as specified and directed. |
| 22 | M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia, fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed fixed in repair (each line wire to be measured) complete all as specified and directed. |
| 23 | M&L formwork to sides of concrete foundation footing, bases of columns & plinth beams complete all as specified and directed. |
| 24 | M&L formwork to sides and soffits of floors & roof, beams beam haunchings, girders etc complete all as specified and directed. |
| 25 | M&L formwork to sides of pillars, posts, struts, columns & stanchiours etc complete all as specified and directed. |
| 26 | M&L formwork to soffit of suspended slabs,such as roof slabs, floor slabs, landing and simillar work n.exc 200mm thick(Horizontal/Sloping) complete all as specified and directed. |
| 27 | M&L RCC, Nominal Mix M-25 using 20mm graded stone aggregate as in columns pillars and struts etc complete all as specified and directed. |
| 28 | M&L RCC, Nominal Mix M-25 using 20mm graded aggregate as in foundations, including, footings, rafts, plinth beams and mass concrete complete all as specified and directed. |
| 29 | M&L RCC, Nominal Mix M-25 using 20mm grated stone aggregate as in beam, contilevers, lintels over 1:5m span complete all as specified and directed. |
| 30 | M&L RCC, Nominal Mix M-25 using 20mm graded stone aggregates as in slab complete all as specified and directed. |
| 31 | M&L RCC, Nominal Mix M-25 using 20mm graded stone aggregates as in Chajjah complete all as specified and directed. |
| 32 | M&L for precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed. |
| 33 | M&L high strength deformed TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 34 | Description all as per item No 33.00 above but 5mm dia and over up to 10mm dia in stirrrups, spacers and binders etc complete all as specified and directed. |
| 35 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 36 | M&L15mm thick cement plaster on the fair face of brick or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed. |
| 37 | M&L15mm thick cement plaster on the fair face of brick or concrete surface in cement mortar 1:4 with WPC@ 200 ml per bag of cement finished even and smooth without using extra cement, complete all as specified and directed.Note :- WPC shall be measured and paid separately |
| 38 | Rendering 5mm thick on ceiling surfaces of brick or concrete in CM 1:3 finished even & smooth without using extra cement complete all as specified and directed. |
| 39 | M&L preparing new plastered surfaces of walls and applying two coat of oil bound distemper over one coat of primer complete all as specified and directed. |
| 40 | M&L preparing new plastered surfaces of walls and applying three coat of cement base paint and complete all as specified and directed. |
| 41 | M&L preparing new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 42 | Supply only water proofing compound, complete all as specified and directed. |
| 43 | S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs/Hold Fast, hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6, including PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in filling in chowkhats, complete all as specified and directed. |
| 44 | S&F Factory made 30 mm thick Flush Shutter, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and directed. |
| 45 | S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded.The rates include for painting with one shop coat of zinc chromate primer complete all as specified and directed.Note:- Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3. |
| 46 | S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete w/o glazing bars devetailed or welded. The rates include for painting with one shop coat of zinc chromate primer complete all as specified and directed.Note:- Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3. |
| 47 | S&F steel ventilator with top hung shutter of glazed & gauged including hinges, steel peg stay complete with glazing bars including one shop coat of redoxide primer complete all as specified and directed. |
| 48 | S&F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed. |
| 49 | S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed. |
| 50 | S&F, MS framed work such as grill grating, framed Guard bars, barred iron doors, ladders, frame work for securing water tank,cooler stand and similar work conformed to Fe-410 or 310-0 complete all as specified and directed. |
| 51 | M&L Preparation of wood and wood based surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 52 | M&L Preparation of steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 53 | Providing and fixing factory made 100% solid WPC (wood polymer composite)- door frame of size 75mmx60mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60(suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawel strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for WC/Bathroom/Toilet and external uses complete all as specified and directed. |
| 54 | providing and fixing , 30mm thick factory made 100% solid WPC (wood polymer composite) solid plain/prelam/enrouted plain/enrouted painted flush door shutter of required size comprising of virgin PVC resin of K value 57-60(suspension grade) calclum carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capcity (screw withdrawl strength of 2000 n (face) and 1100 N (edge) minimum copmressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with property of being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws for WC/bathroom/toilet/Kitchen/Balcony doors complete all as specified and directed. |
| 55 | S&F MS Sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed. |
| 56 | S&F Aluminium anodised, barrel tower bolts of extruded section 150mm long complete all as specified and directed. |
| 57 | S&F Aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and directed. |
| 58 | M&L for 50mm thick cement concrete type C1 (1:3:6) as in plinth protection finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 59 | M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in sub base complete all as specified and directed. |
| 60 | S&F steel water tubing galvanised 15mm nominal bore, medium grade with all fittings fixed to wall and ceiling or in floor including cutting /chiseling in trenches including making good the disturbed surface, complete all as specified and directed. |
| 61 | S&F steel water tubing galvanised 20mm nominal bore, medium grade with all fittings fixed to wall and ceiling or in floor including cutting /chiseling in trenches including making good the disturbed surface, complete all as specified and directed. |
| 62 | S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) tiles of size 400 x 400 mm in floors, over and including 15 mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed flush with white or coloured to match and complete all as specified and directed. |
| 63 | M&L for coloured glazed ceramic tiles of size 350 x 250 x 7mm/ 450 x350 x 7mm thick as in vertical surface and jointed in neat cement slurry and pointed flush with white or coloured to match ,over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed. |
| 64 | S&F 15 mm dia CP Angle Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. |
| 65 | S&F PVC connection 15 mm dia and 450 mm long with PTMT nuts complete all as specified and directed. |
| 66 | S&F Premium Design ,Stainless steel Heavy weight Cloth Hanger of 6 pin with length 250-400 mm and complete all as specified and directed. |
| 67 | S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 68 | S&F vitreous china squatting pan \\"ORISSA\\" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed. |
| 69 | S&F PVC flushing cistern 10 litre capacity, valveless, syphonic action type with float, handle including 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified and directed. |
| 70 | S&F Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and complete all as specified and directed. |
| 71 | S&F PVC waste pipe 32 mm dia of standard length suitable for WHB or for sink as required at site, complete all as specified and directed. |
| 72 | S&F in 15mm size Swan Neck ,long Body ,wash basin mixer, fancy type cast copper alloy, Quarter turn, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 73 | S&F in repair Wall Mixer 3-in-1 System with 115 mm Bend Pipe & Aerator complete all as specified and directed. |
| 74 | S&F in repair 150 mm brass chromium plated over head shower rose fitted to steel pipe or union complete all as specified and directed. |
| 75 | S&F Rotational moulded polythylene water storage tank tripple layer in white colour of capacity 500 litre (Cylindrical, Vertical with closed top) in position with 20mm float ball and complete all as specified and directed. |
| 76 | S&F 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 77 | S&F 110mm dia PVC bend any radius for rain water pipe including benching of bends provided at ground surface in PCC 1:3:6 and complete all as specified and directed. |
| 78 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 79 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 80 | S&F 110mm PVC (SWR) access door bends any radius complete all as specified and directed. |
| 81 | S&F 75mm PVC (SWR) access door bends any radius complete all as specified and directed. |
| 82 | S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 83 | S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 84 | S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 85 | S&F 75mm PVC (SWR) vent cowl complete all as specified and directed. |
| 86 | S&F, PVC Nahani trap 75mm bore with grating incl jointing with solvent cement fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 87 | Dismantling brick tiles in single layer on roof (laid dry and pointed) complete all as specified and directed. |
| 88 | Demolition Mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof) and removing debries out of MD land complete all as specified and directed. |
| 89 | M&L for providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) as in roof kerbs, Roof padding finishing surface of concrete topping even and fair(without using extra cement) all as specified of average thickness in slope 1:40 over roof complete all as specified and directed. |
| 90 | M&L for providing 10mm thick polymer modified plaster in ratio 1:10 (1 part of polymer and 10 parts of cement with solid contents not less than 30%) over slab and applying coat of epoxy primer with resin and hardner with water dilution as per manufacturer instructions, applying 1st coat of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm and applying 2nd coat solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm over derived 1st coat complete all as specified and directed.Make:- M/S Asian Paints Ltd., M/S STP Ltd, M/S Sika India Pvt. Ltd or equivalent in.Note:- (a) The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the directions of Engr-in-Charge. (b) Primer shall be used as recommended by manufacturers of waterproofing coating is to be applied. The firm will give six-year warranty of their products and same shall be applied using their authorized applicant. |
| 91 | Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, partition and similar suspended work and making good the disturbed area in CM 1:3 complete all as specified and directed. |
| 92 | S&F in repair Rotational moulded polythylene water storage tank tripple layer in white colour of capacity 1000 litre (Cylindrical, Vertical with closed top) in position with 20mm float ball in repairs including dismantling of the old unserviceable water tank complete all as specified and directed. |
| 93 | M&L for factory made rubber moulded vibratory precast concrete interlocking paver block of approved shape, size and colour confirming to IS 15658-2006 of 60mm thickness M-35 grade fixed with grey cement and pigment laid over and including 25mm thick sand cushion complete all as specified and directed. |
| 94 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 95 | Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed. |
| 96 | M&L for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed. |
| 97 | Description all as per item No 96.00 (here-in-before) but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 98 | Description all as per item No 96.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed. |
| 99 | Description all as per item No 96.00 above but point wiring with 2.5 sq mm single core FR cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 100 | M&L for Point wiring with 4 sq mm, single core ,PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS -694 marked, with multistandard copper conductors and earth continuity wire with similar 4 Sq mm cable (incl connecting to earth dolly) drawn through and including rigid PVC conduit and conduit accessories / fittings, fixed / laid in concealed in walls and surface on ceilings(including cutting chases in wall) and also including sunk in type pressed steel terminal box and 3 mm thick plastic laminated sheet independent board complete all as specified and directed. |
| 101 | S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts complete all as specified and directed. |
| 102 | S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed. |
| 103 | S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed. |
| 104 | S&F Modular lamp holder, insulated body with back plate with lamp suitable for batten fittings and complete all as specified and directed. |
| 105 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 106 | S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. |
| 107 | S&F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 108 | S&F in repairs Sheet metal enclosure distribution board SP&N,4 way, Single door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 complete all as specified and directed. |
| 109 | S&F in repairs Sheet metal enclosure distribution board SP&N,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed. |
| 110 | S&F MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.Note : Make of the MCB should be the same as that of DB |
| 111 | S&F MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.Note : Make of the MCB should be the same as that of DB |
| 112 | S&F in replacement of Bldg security light fitting LED 35 W, pressure die cast housing epoxy powder coating IP -65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 mtr length and fixed with MS Calmps of size 40x5 mm- 02 nos ,nuts, bolts and washers on wall complete all as specified and directed. |
| 113 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion complete all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 114 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section, 2 Core in service connections complete all as specified and directed. |
| 115 | S&F cable of 6 sqmm Elastomer sheathed flat twin core with aluminium conductor suitable for single phase , 230 V complete all as specified and directed. |
| 116 | S&F PVC 20/25mm casing and caping, ISI marked complete all as specified and directed. |
| 117 | S&F electric water heater storage type steel body with copper inner tank and heating element upto 3KW capacity 50 Ltr. BEE 5 Star rated complete with all accessories such as safety valve, Thermostate, NRV, PVC connection piece etc complete all as specified and directed. |
| 118 | S&F sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one SP MCB of 20 Amp rating 240 Volt complete all as specified and directed. |
| 119 | M&L for providing/cutting the round/ square hole of reqd size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing propeller type ac ventilating fans, single phase , 230 volts 250 mm sweep complete and grouting the ragged bolts in wall fixing the frame on the exhaust side (outer surface of the wall ) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor complete all as specified and directed. |
| 120 | S&F of post top lantern of LED 15 W with symmetrical light distribution , spun alumnium landascape luminaire with high power LEDs as light source ,ip 65 protection with suitable GI tubing suitable for fixing on boundary wall including all accessories all as specified and directed. |
| 121 | S&F of post top lantern of LED 40 W with symmetrical light distribution , spun alumnium landscape luminaire with high power LEDs as light source ,ip 65 protection with suitable GI tubing including all accessories all as specified and directed. |
| 122 | Supply and laying steel water Tubes, 'medium grade', galvanised, with all fitting; laid in trenches/fixing on walls of 25 mm dia complete all as specified and directed. |
| 123 | S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 25 mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender