Tender For Addition Alteration Of Labour Room To Operation Theatre And Pediatric Ward To Icu At Mother And Child Block At Bb Cantt, Srinagar In The Aor Of B/R-Ii Under Ge 864 Ews
Tender Value
1.45 Crore
Estimated cost
Bid Submission
15 Sep 2026
22 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration Of Labour Room To Operation Theatre And Pediatric Ward To Icu At Mother And Child Block At Bb Cantt, Srinagar In The Aor Of B/R-Ii Under Ge 864 Ews
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Glazed ceramic coloured tiles, of size 450mmx300 mm and 7mm thick, as in skirting, dado set and jointed with neat cement slurry over and including & Rendering 10 mm thick on wall and the like to receive tile in cement mortar (1:4), including pointing in white cement with pigment to match the shade of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for Joint free non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry over and including & screed bed or bedding layer 10 mm thick (average thickness) for laying floor finishes in cement mortar 1:4 and pointed in white or coloured cement to match laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick average thickness for laying floor finishes in cement mortar 1:4 and pointed in white or coloured cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 4 | S&F 10-12mm thick 1st class softwood wooden (Australian) panelling fixed with tounged and grouted a wall panelling and including fillets/cornices and 9mm ply wood fixing on wall and two coats of varnishing polishing and including prerparation with sneezing, complete all as specifiedf and directed. |
| 5 | M&L for 3mm thick epoxy flooring/coving with approx 6kg/sqm, forming minimum 3 mm thickness over scratch coat and finishing it, It shall have compressive strength of more than 45 mpa and flexure strength of 15 mpa and having shore hardness of 70 after 7 days and temperature withstanding ability of -15 to 60 degree C , Complete all as per Manufacturer's instruction and as directed by Engr-In-Charge. |
| 6 | M&L for 6mm thick non Asbestos fibre cement/pre laminated self embossed texture designer board E-Board classic 595mmx595mm, HSPC (high pressure steam cured) to be fixed or inserted to pre laminated GI frame work for sealmess ceiling size 600mmx600mm with main runner 38x24x0.9mm thick, cross tee 8.6x0.9mm and wall angle 19mmx19x0.9mm duly suspended with 2mm dia GI wire hangers 1200mm centre to centre bothe ways fixed with steel dash fasternes or from purlin from the roof with alignment clip, including dismantling of existing false ceiling of any type complete all as specified and directed. |
| 7 | M&L for Anti-microbial & mold resistant fiberglass false ceiling 9.5(+/- 0.2)mm thick complying with relevant IS Standard width (mm) 595 (+/-0.2) & Length (mm) 595 (+/-0.2) square edge white with more than 80% light reflectance and Humidity resistance -70% to -90%. Face side laminated with biocide treated white PVC lamination & Rear side laminated with 12 micron metalized polyester film with antifungal & antimicrobial properties. Surface shall be smooth, wipeable suitable for health care & hygienic applictaions to be fixed to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600mmx 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 2mm outer diameter M-6 dash fasteners and Lshape level adjuster of size 85mmx25mmx2mm. Galvanised iron perimeter wall angle of size 24mmx 24mmx0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 8 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in cement mortar 1:6 etc including demolition of brick work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed. |
| 9 | M&L for cutting of existing grouting in tiles carefully with cutter / grinder & refilling the same gaps with white cement/ epoxy & cleaning the surface to get a smooth finished look upto the satisfaction of Engr - in - charge, complete all as specified and directed. |
| 10 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed. |
| 11 | Taking down chowkats or frames with shutter area not exceeding 1.50 Sqm without taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and directed. |
| 12 | Taking down chowkats or frames with shutter area exceeding 1.50 Sqm and not exc 4.00 Sqm (without taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete all as specified and directed. |
| 13 | S&F powder coated aluminium (minimum thickness of powder caoting 50 micron) work for doors, windows, ventilators and partition (fixed portions) with extruded built up standard tubular sections/3 track and other sections of approved make conforming to IS-733 and IS-1285, fixing with dash fasteners of rquired dia and size including necessary filling up the gaps at junction i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight , mitred and jointed mechanically where required including cleat angle, Aluminium snap beading for glazing/panelling CP brass/stainless steel screws, all complete as per architectural drawings and as directed by Engineer-in-charge. |
| 14 | S&F powder coating of any colour (thicknes of powder coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, locking arrangement, handles, tower bolt & necessary butt hinges etc complete all as specified and directed by Engineer-in-charge. |
| 15 | S&F powder coating of any colour (thickness of powder coating not less than 50 micron ) anodised aluminium window and ventilator shutters fixed/sliding/side hung type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle , locking arrangement, necessary butt hinges, tower bolts etc complete all as specified and directed by Engineer-in-charge. |
| 16 | S&F in repair 4.0mm thick coloured plain/ tinted sheet glass of selected quality and glazing with aluminium beading in squares/rectangular window/door shutters complete all as specified and directed by Engineer-in-charge. |
| 17 | S&F 4.0 mm thick Frosted sheet glass of selected quality and glazing with aluminium beading in squares/rectangular window/door shutters complete all as specified and directed by Engineer-in-charge |
| 18 | S&F in repair for ACP sheet 4mm thick in aluminium frame including necessary fittings, complete all as per specified and directed by Engineer-in-Charge. |
| 19 | M&L for RCC (nominal mix) 1:2:4, type B1 (using 20mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste forwork including demolition of old RCC items complete all as specified and directed. |
| 20 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 21 | M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over 15mm thick in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 22 | S&F sink with drainage board, made of stainless steel 1.0mm thick, suitable for kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or including cast iron cantilever brackets of suitable size and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 23 | S&F wall hung stainless steel surgical scrub sink construction utilizing medical grade 304 stainless steel of 3 bay size 79\\" wide x 27 1/4\\" deep x 38\\" high incl all fittings & fixtures as per drgs in CA and as per site requirement, complete all as specified and directed. |
| 24 | Dismantling structural steel work including doors, gates etc. complete all as specified and directed. |
| 25 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 and framed and hung as gates, rollers for sliding on sliding MS plate including pintle hinges,/Pin type hinges stops, hand-made sliding bolts, etc. complete all as pecified and directed. |
| 26 | S&F 2000 litres capacity rotational moulded triple layered polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve, complete all as specified in SSR Part I complete all as specified and directed. |
| 27 | M&L for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white including 3mm thick lipping and equal to thickness of board as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed. |
| 28 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 29 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed |
| 30 | S&F continuous (piano) hinges 30mm width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 31 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 32 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base over rammed earth complete all as specified and directed. |
| 33 | M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment (grey, red, yellow coloured as in combination & pattern as approved by EIC) laid over 50mm thick sand cushioning complete all as specified and directed. |
| 34 | M&L chequered cement concrete tiles of glossy finish type 30cmx30cmx25mm thick with grey cement and pigments over and including 20mm thick screed bed or bedding layer in cement mortor (1:6) , set, jointed and pointed in neat cement slurry complete all as specified and directed |
| 35 | M&L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, ramps , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 36 | M&L for 75mm thick cement concrete 1:3:6, type C-1(using 20mm graded stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement including making joints every 2.5m and corner filled with bitumen 85/25 complete all as specified. |
| 37 | M&L for providing precast cement concrete (1:1.5:3 RCC, 10# bars - 100mm x 100mm ) as in drain/ manhole cover of 75 mm thick exc 0.25 Sqm and n exc 1 Sqm in area embedded in 75x75x6 mm angle and placed over locations complete all as specified and directed. |
| 38 | Excavating in post holes each n.exc 0.5 cum getting out soft and loose soil and returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed. |
| 39 | M&L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in post/strut foundation complete all as specified and directed. |
| 40 | M&L for MS work conforming to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete and all as specified and directed. |
| 41 | Supply only Chain link fencing complete all as specified and directed. |
| 42 | Fixing only Chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 43 | S & F flat iron of size as directed as in fixing clamps or support to chain link fencing, stiffeners etc fixed with nut and bolts including making necessry holes complete all as specified. |
| 44 | S&F mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed of the other end, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed. |
| 45 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L type or J type or cranked hook and washer in wall complete all as specified and directed. |
| 46 | S & F mild roof structural steel angles/rectangular hollow section/steel tubular roof trusses (framed), purlines and fastening including distance pieces etc. complete all as specified and directed. |
| 47 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 48 | S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as complete all as specified and directed. |
| 49 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed. |
| 50 | S&F in repairs Aluminium (die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 51 | S&F 20mm thick machine cut designer MDF board fixed with nails in any situation as in eaves board of design/ pattern as approved by EIC complete all as specified and directed |
| 52 | M&L for preparation of new or previously untreated wooden surfaces/ boarding of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 53 | S&F in 25 mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes two in each door and window complete all as specified and directed (Sample as approved by GE). |
| 54 | S&F in venetion blind of 100mm wide strip for windows including Headrail section, Top fix (Spring), End caps, Chain & cord, Cord weight, Stabilising chain with C Clip, Ballast weight, Hanger & Carrier track and all other necessary fittings & fixtures complete all as specified and directed. Design and colour as approved by GE. |
| 55 | Taking down cement plaster on brick or stone walls etc built in cement or lime mortar and including racking out joints, hacking for lkey, scrubbing down with wire brush etc complete all as specified and directed. |
| 56 | M&L for preparatin of old/new plastered surfaces and applying 1 to 2 mm thick white wall care putty in internal surface or water-proof exterior grade wall care putty in external surfaces in two coats and sanding of putty surafce in each coat to obtain smooth/ even and undulated finish surface complete all as specified & directed |
| 57 | M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick surfaces complete all as directed by Engr-In-Charge. |
| 58 | M&L for 15mm thick rendering in cement mortar 1:4 other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 59 | M&L for complete removal of existing treatment including scraping, removing all mud, cake with wire brush and gunny bags from old plastered surfaces complete all as specified and directed. |
| 60 | M&L for applying two or more coatsof 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including preparation & priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ old surfaces complete all as specified and directed. |
| 61 | M&L for preparation of newly plastered surfaces and applying two coat of oil emulation distemper on wall priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and directed. |
| 62 | M&L preparation of old surface of walls and applying two coats of oil emulsion distemper , complete all as specified & directed |
| 63 | M&L plain cement concete 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundation filling / flooring ,including demolition complete all as specified and directed. |
| 64 | S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 20 mm outer dia SDR7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors, including taking up or down old pipe ,complete all as specified and directed |
| 65 | S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 25 mm outer dia SDR7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors, including taking up or down old pipe complete all as specified and directed. |
| 66 | S&F 12mm thick toughened glass as in hinged doors, partitions automatic doors with necessary long soild fancy handles 2 Nos in each door, suitable hinges, locking arrangment hydraulic floor spring as required, design in printing 92 BH logo on glass door. including cutting to shape, drilling holes required, including frame work of mild steel to support hinges on top and sides , frame work duly fixed/embeded in to wall with minimum 150mm long flats/fastener at every 0.30m interval along its length necessary items, all fittings and fixtures as per requirement ,complete all as specified and directed. |
| 67 | M&L for cutting into existing manholes of internal dia of pipe 100mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed. |
| 68 | M&L for 110mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls including demolition of old pipes of any type complete all as specified and directed. |
| 69 | M&L for 75mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls, incl demolition of old pipes of any type complete all as specified and directed. |
| 70 | S&F PVC(SWR) branch piece single equal or unequal 110mm cojmplete all as specified and directed. |
| 71 | S&F PVC(SWR) branch piece single equal or unequal 75mm complete all as specified and directed. |
| 72 | S&F PVC(SWR) bends any radius 110mm, complete all as specified and directed. |
| 73 | S&F PVC(SWR) bends any radius 75mm, complete all as specified and directed. |
| 74 | S&F PVC(SWR) 'S' trap any radius 110mm, complete all as specified and directed. |
| 75 | S&F PVC(SWR) vent cowl any radius 110mm, complete all as specified and directed. |
| 76 | S&F Vanity type WHB long pattern of 78cmx 48cm including all fittings & fixtures with decorative cabinet with door/ shutter 02 Nos drawers etc complete all as specified and directed. |
| 77 | S&F in vitreous china counter top wash basin of selected quality with inclusive 32mm waste fittings, brass, chromium plated ,waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement etc complete all as specified and directed. |
| 78 | S&F in repair Vitreous China wash down water closet one piece pan (Pedestal pattern), white/colour (including all fitting all fixing bolts, flushing cistern, jet spray and flush pipe) complete all as specified and directed . |
| 79 | S&F in 125mm brass chromium plated shower roses including fixing to steel pipe etc complete all as specified and directed. |
| 80 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 90gms) complete all as specified and directed. |
| 81 | S&F in repair brass chromium plated tubular towel rail 20mm dia complete all as specified and directed. |
| 82 | S&F in repair 15mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 83 | S&F in repair 15mm bore Brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 84 | S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. |
| 85 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 86 | S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 87 | S&F in repair 15mm bore stop valves or angle valve, fancy type chromium plated (Concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 88 | S&F in repair Toilet paper holder, vitreous China, box type, white, fixed to walls with chromium plated (CP) brass screwsc complete all as specified and directed. |
| 89 | S&F in repair glass shelf assembly, consisting of 5.50mm thick sheet glass, 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed. |
| 90 | S&F in repair corner glass shelf ,three set type, of size 300x300mm (lower), 225x225mm (medium) & 150x150mm (upper) fixed with Cp brass scews, complete all as specified and directed. Make :- Jaquar Cat Part No CAN-CHR-1173N or techno commercially equivalent make/model as aproved by GE. |
| 91 | S&F CP grating 100mm dia complete all as specified and directed. |
| 92 | S&F PVC (SWR) 100mm dia multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 93 | S&F 600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 94 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 95 | S&F in repair PVC connections 600mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed. |
| 96 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete including dismantling of old railing all as specified and as directed. |
| 97 | M&L for plain cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete finished ever and smooth complete all as specified. |
| 98 | M&L for RCC (Design Mix) M-30 as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 99 | M&L for RCC (Design Mix) RCC Design Mix M-30 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 100 | M&L for RCC (Design Mix) RCC Design Mix M-30 as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed. |
| 101 | M&L for RCC (Design Mix) RCC Design Mix M-30 as in Columns, pillars, piers, posts and struts all as specified and directed. |
| 102 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surface of concrete, complete all as specified and directed. |
| 103 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing & similar work exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 104 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions of square, rectangular or polygonal shape for fair finished surface of concrete, complete all as specified and directed. |
| 105 | S&F for mild steel TMT bars, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild seel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and directed. |
| 106 | M&L brick work with sub class `B' bricks straight or curved on plan exc. 6mtr mean radius built in cement mortor 1:6, complete all as specified and directed by engineer-in-charge. |
| 107 | M&L 40mm thick cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 108 | M&L rendeing 5mm thick on ceiling surfaces in cement mortar 1:3 finished even and smooth without using extra cement including necessary scaffolding, formwork, safety precautions for multi storey bldgs, complete all as specified & directed. |
| 109 | M&L for Maxi - grip endura anti-skid/ anti-slip ramp coloured tiles 300mmx300mm and 9-10mm thick confirming to DIN 51097 & 51130, laid in floors etc, set & jointed in neat cement mixed with pigment to match the colour of tiles over and including 20mm thick screed bed in cement mortar 1:6 including demolition/dismantling of old tiles, complete all as specified and directed. |
| 110 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan, bell, socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder, regulators, bell etc complete including making good to disturbed surfaces to match with existing surfaces and removing of all the old materials from the site for to taking as a schedule of credit complete all as specified and directed by EIC . |
| 111 | Taking down carefully ceiling fan from site and repair it if required Including spray painting complete and refixing the same position with entire satisfaction of Engr-in charge. |
| 112 | Taking down carefully of existing OT light from site and deposit in MES store complete all as specified and directed. |
| 113 | Taking down carefully existing concealed LED light fittings of sizes 2'x2' ,36 Watts from ceiling and refixing same position as per direction by EIC |
| 114 | M&L for single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 Volts grade with having multistranded copper conductor wire of size 1.5 Sq.mm (nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories with proper colour coding including providing of suitable sizes of modular boxes and modular plates mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 Volts grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc one light point / fan point wiring system controlled by one way switch complete all as specified and directed by EIC. |
| 115 | All as per Ser item No 114 here-in-before but one light point / fan point wiring system controlled by one way switch complete . |
| 116 | All as per Ser item No 114 here-in-before but one 5 Amp socket outlet point wiring system fixed on same board & controlled by one way switch complete |
| 117 | All as per Ser item No 114 here-in-before but one 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch complete |
| 118 | All as per above sr item No 114 but using PVC insulated FRLS wire 1100 Volts grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI marked for power socket point on independent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 Volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete all as specified and directed. |
| 119 | All as per above sr item No 5 here-in-before but using single runs of PVC insulated FRLS wire ,1100 Volts grade with multistranded copper conductor wire of size 4 Sq.mm (nominal area) ISI Marked for high power wiring system with fixed on independent board and also providing of 4 sqmm PVC insulated FRLS wire 1100 Volts grade ISI Marked with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed. |
| 120 | S&F of modular type switch 5/6 Amps 220 Volts AC,one module complete all as specified and directed. |
| 121 | S&F of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular complete all as specified and directed. |
| 122 | S&F of modular type switch of 15/16 Amps 220 Volts AC one module complete all as specified and directed. |
| 123 | S&F of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular complete all as specified and directed. |
| 124 | S&F ceiling rose three terminals type made out of polycarbonate, isolated body complete all as specified and directed. |
| 125 | S&F of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb Including providing of LED bulb of capacity 7/9 watt warm/ white colour type complete all as specified and directed . |
| 126 | S&F of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete all as specified & directed . |
| 127 | S&F of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and making electric connection all as specified and directed. |
| 128 | S&F recessed / ceiling concealed mounted flat slim panel square shape with LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/36/37 Watt 220 Volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete used for roof ceiling and required fitting use in both warm/white type colour complete set providing of suitable type of flat flexible two/three core cable and making electric connection complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete all as specified and directed. |
| 129 | Supply installation,testing and commisioning of Barrisol Interior solution stretch ceiling of the sky lights made of printed ceiling fabric PVC memrane with fabric sheet ,thickness 0.25 mm,Light Source : LED cool white 4.5 watt Type non flammable fixed at false ceiling complete all as specified and directed. |
| 130 | S&F of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amps and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site or directed complete all as specified and directed |
| 131 | S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 Volts 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP 160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical complete all as specified and directed by EIC. |
| 132 | Supply , fixing and proper inslalling ,testing and commisioning OT lights suitable for operation purpose Slim with following specification: (i) light source type -LED,(ii) Nos of Dome -02 Nos (iii) Made in india (iv) colour temparature - 4100 K SMPS -2Nos with Intensity control -stepless control facilities. (v) No. of LEDs–35 +35Nos.(Philips LUMILED- USA) (vi) Focus- adjustable type High Output of 1,35,000+1,35,000 Lux(vii) Model No PHILILED S 50 or all technical specification and technical parameter sizes and type shall be properly match with existing OT light with its complete accesories all as specified by EIC |
| 133 | S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 8 way type 220 Volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC. |
| 134 | S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 4 way type 220 Volt AC supply system with IP protection rating IP 65/66 with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection complete all as specified and directed by EIC. |
| 135 | S&F of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete all as specified. |
| 136 | S&F of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete all as specified. |
| 137 | S&F of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified. |
| 138 | S&F of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 10 Sqmm and 1 Run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note : 3 runs of 10 sqmm and one run of casing capping shall be measured as one RM |
| 139 | S&F of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 6 Sqmm and 1 Run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note:- 3 runs of 6 sqmm wire and one run of PVC casing capping/conduit shall be measured as 1.0 RM. |
| 140 | S&F of sheet metal enclosure duly powder coated with Triple pole and neural enclosure with having a three pin and earth plug & top and socket complete with one triple pole MCB 40/63 Amp all as specified and directed. |
| 141 | Supply, fixing and commissioning and testing of star rated of electric ventilation exhaust fan of size 250 mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall construction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work complete all as specified and directed by EIC. |
| 142 | S&F wall mounting fan of size 400 mm sweep single phase 220 Volt AC with complete assembly and cover, PVC stand bracket base frame, alongwith pull cord oscillating and speed knob system, single piece blade, outer mild steel guard frame system with wall bracket attachment with fixing arangement accessories complete all as specified and directed. |
| 143 | M&L for taking down carefully of existing Medical oxygen Gas pipe line and deposite to user complete all as specified and directed by EIC |
| 144 | M&L for fixing of copper tubing of size 12 mm OD , 0.9 mm wall thickness including proper saddling, clamping and insertion of branches connections including all fittings for medical use ,complete all as specified and directed. |
| 145 | M&L for fixing 1/2' Brass Ball valve suitable for controlling the machine and oxyzen pipe line with end fittings including all fittings for medical use ,complete all as specified and directed. |
| 146 | M&L for fixing of copper tubing of size 15 mm OD , 0.9mm wall thickness including proper saddling, clamping and insertion of branches connections including all fittings for medical use ,complete all as specified and directed. |
| 147 | M&L for fixing 12 mm Brass Ball valve suitable for controlling the machin and oxyzen pipe line with end fittings including all fittings for medical use ,complete all as specified and directed. |
| 148 | Supply and fixing Manifold valve for safety control the supply of gases as oxyzen,nitrous oxide medical air and carbon dioxide and maintain the continous gas supply complete all as specified and directed. |
| 149 | Supply and fixing oxygen panel stop valve suitable for isolation and control of oxygen supply system complete all as specified and directed. |
| 150 | Supply and fixing bed panel with oxygen, vacuum and nitrozen with complete accesoreis suitable for paitent bed all as specified and directed by Engineer in charge. |
| 151 | S&F Water heater storage type, electric, capacity 15 litres, BEE 5 star rated with complete fiiting i.e fastner nut bolts ,saftey valves , Thermostate, NRV, PVC connection and washer etc complete all as specified and directed. |
| 152 | S&F Water heater storage type, electric, capacity 5 litres, BEE 5 star rated complete fiiting i.e fastner nut bolts ,saftey valves , Thermostate, NRV, PVC connection and washer etc complete all as specified and directed. |
| 153 | S&F electric geyser storage type steel body and heating element upto 2 KW suitable for capacity 25 Litre .BEE 5 star rated complete with all accesories such as safety valve, thermostate , NRV,PVC Connection and fixed to wall with MS fastner ,nut bolts and making electric connection complete all as specified and as directed by Engineer-in-charge. |
| 154 | Supply and fixing new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source 25W, 5700K for fixing at gates with PCC work and GI pipe of suitable size including finishing of disturb surface all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender