Tender For Special Repair To Building No. P-158 Ncc Ota, Argum Line Govt Md Accn At Ncc Ota K Tee.
Tender Value
17.43 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
34860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No. P-158 Ncc Ota, Argum Line Govt Md Accn At Ncc Ota K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed. |
| 2 | Material and labour for provision of water proofing treatment by using APP torch on non woven polyester film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with and including WPC and two coat of aluminum paint of 0.2 Kg/Sqm (each coat) over membrane taking down existing water proofing treatment including Plain Cement Concrete padding, mortar etc and disposal of rubbish outside of MDcomplete all as specified and directed.Note:- Work to be executed through authorized applicator only. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar beading (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed. |
| 4 | Material and labour for coloured non skid ceramic premium quality tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 5 | Material and labour for coloured non skid ceramic premium quality tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 6 | All as in item 5 above but as in skirting with and including 10mm backing in cement mortar 1:4 complete all as specified and as directed. |
| 7 | Material and labour for glazed ceramic coloured premium quality tiles 300mm x 450mm, on vertical surface such as skirting/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in Cement Mortar 1:3 finished even and fair complete all as specified and as directed. |
| 8 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 9 | Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200 mm thick (Horizontal or sloping) rough finished surfaces of concrete flat complete all as specified and directed. |
| 10 | Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed. |
| 11 | Material and labour for reinforced cement concrete 1:1 1/2:3 type M-20 (Design Mix) (using 20 mm graded stone aggregate) Foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc.; basement slabs under-reamed piles and mass concretee complete all as specified and directed. |
| 12 | Material and labour for reinforced cement concrete 1:1 1/2:3 type M-20 (Design Mix) (using 20 mm graded stone aggregate) in chajjas complete all as specified and directed. |
| 13 | Material and labour for mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 14 | Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed. |
| 15 | Material and labour for pre-polished Machine cut kota stone slab flooring 20-25 mm thick over and including cement screed base 20mm thick in CM 1:4 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete, complete all as specified and directed. |
| 16 | Material and labour for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per SQM, mixed with pigment to match the shade of the slab incl rubbing and polishing, laid over and including 10mm thick screed in cement mortar 1:4, complete all as specified and directed |
| 17 | Supply and fix pre-polished granite 20mm thick fixed on platform/ shelves/ steps/ cills over and including 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as specified and directed |
| 18 | Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 19 | Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( using 40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including mass filling in complete all as specified and directed. |
| 20 | Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed. |
| 21 | Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 22 | All as per item 21 above but half brick wall in CM 1:4 complete all as specified and as directed. |
| 23 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed |
| 24 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 25 | Material and labour for rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed.Note: WPC shall be measured and paid separately. |
| 26 | Supply only liquid water proofing compound complete all as specified and directed. |
| 27 | Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 28 | Material and labour for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even and smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note : Rate for form work incl in the rate quoted by the contractor. |
| 29 | Material and Labour for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of surfaces complete all as specified and directed Note:- Painting to be executed by mechanical means through authorized applicator of approved make. |
| 30 | Material and labour for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer, over a coat of wall care putty complete all as specified and directed.Note:- Painting to be executed by mechanical means through authorized applicator of approved make. |
| 31 | Material and labour for complete removal of Existing Treatment and applying two coats of oil bound distemper over a coat of cement Primer and wall care putty complete all as specified and directed.Note:- Scrapping and painting to be executed by mechanical means through authorized applicator of approved make. |
| 32 | Material and labour for complete removal of Existing Treatment and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over Existing surfaces including preparation of surfaces complete all as specified and directed Note:- Painting to be executed by mechanical means through authorized applicator of approved make. |
| 33 | M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed |
| 34 | Material and labour for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed. |
| 35 | Taking down door / window frame with shutter (without taking of shutter from the frame) area n. exc 1.50 sqm complete all as specified and directed. |
| 36 | Taking down door / window frame with shutter (without taking of shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed. |
| 37 | Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed. |
| 38 | Supply and fix ( factory made) pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. |
| 39 | Supply and fix ( factory made) pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. |
| 40 | Material and labour for Plain Cement Concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed. |
| 41 | Supply and fix 30 mm thick flush shutters solid core construction with block board core and both face is covered with decorative face veneer with lipping/frame to matchplywood face panels complete all as specified and directed. |
| 42 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame but wire gauzed panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly at site as per specification & drawing |
| 43 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge complete all as specified and directed |
| 44 | Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge complete all as specified and directed |
| 45 | S & F powder coating aluminium frame for doors, windows , ventilators with one or more rebates incl joining cleat for fixing etc. complete all as spd. (thickness or powder coating not less than 50 micron) |
| 46 | S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron)Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 47 | S&F powder coated aluminium ventilator louvers type section aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc louvers after open use in ventilator in order to allow air or light in while keeping sun in or moisture out complete all as specified and directed.(thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 48 | S&F 4.8 mm thick glass, ordinary quality and glazing with oil putty/wooden beads in square exceeding 0.5 square metre in each pane complete all as specified and as directed. |
| 49 | Supply and fix 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.50 square metre in each pane complete all as specified and as directed. |
| 50 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 51 | Supply and fix framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 52 | Supply and fix 100 mm long stainless steel butt hinges and fixed with screw/welded to frames etc complete all as specified and as directed. |
| 53 | Supply and fixing 150mm stainless steel barrel tower bolts, fixed complete all as specified and as directed. |
| 54 | Supply and fixing 125 mm stainless steel pressed handles, fixed complete all as specified and as directed. |
| 55 | Supply and fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 56 | Material and labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 57 | Material and labour for complete removal of existing treatment of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, of approved make complete all as specified and directed. |
| 58 | Material and labour for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide on new surfaces in any tint complete all as specified and as directed. |
| 59 | Taking Down GI Pipe 15 mm bore dia complete all as specified and as directed. |
| 60 | Taking Down GI Pipe 20 mm bore dia complete all as specified and as directed. |
| 61 | Supplying and laying of CPVC pipes 16 mm bore SDR 11 & Plain CPVC SDR 11 fittings in trenches and including taking up or down steel tubing and connection complete all as specified and as directed. |
| 62 | Supplying and laying of CPVC pipes 20 mm bore SDR 11 & Plain CPVC SDR 11 fittings in trenches and including taking up or down steel tubing and connection complete all as specified and as directed. |
| 63 | S & F Brass Elbow 16 mm for CPVC pipes complete all as specified and as directed. |
| 64 | S & F Brass Elbow 20 mm for CPVC pipes complete all as specified and as directed. |
| 65 | S & F Brass Tee 16 mm for CPVC pipes complete all as specified and as directed. |
| 66 | S & F Brass Tee 20 mm for CPVC pipes complete all as specified and as directed. |
| 67 | S & F Brass Union 16 mm for CPVC pipes complete all as specified and as directed. |
| 68 | S & F Brass Union 20 mm for CPVC pipes complete all as specified and as directed. |
| 69 | S & F Brass Ball Valve 16 mm for CPVC pipes complete all as specified and as directed. |
| 70 | S & F Brass Ball Valve 20 mm for CPVC pipes complete all as specified and as directed. |
| 71 | Supply and fix in repairs vitreous china white squatting pan \\"Orissa Pattern\\" size 580x440mm, with integrated foot rest (excluding flushing cistern, flush pipe etc) including making good to floor complete, all as specified and directed. |
| 72 | Supply and fix in repair Vitreous China wash basin, white, with pedestal flat back, size 540x400mm excluding ditto but including brackets and pedestal etc all as specified and directed. |
| 73 | Supply and fix in repairs 10 litre capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified. |
| 74 | Supply and fix in repair bib tap 15 mm dia cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 75 | Supply and fix, fixing Pillar taps, fancy type cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spd and directed |
| 76 | Supply and fix in repair Center hole basin mixer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type screwed for iron pipe and fixed, complete all as specified and as directed. |
| 77 | Supply and fix in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower incl supply of shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head, complete all as specified and directed. |
| 78 | Supply and fix in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specified and directed. |
| 79 | Supply and fix in repairs stop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed. |
| 80 | Supply and fix in repairs 25mm dia stainless steel curtain rod of approved quality including supply and fixing of SS braket for holding curtainrod complete all as specified and directed |
| 81 | Supply and fix fancy type finial decorative type of approved quality fixed to curtain rod with screws complete all as specified and directed. |
| 82 | Supply and fix in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 83 | Supply and fix in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 84 | Supply and fix in repair sinks with drainage board made of stainless steel thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm incl waste pipe 32mm dia complete all as specified and directed. |
| 85 | Supply and fix as in repair stainless steel kitchen plate rack of size 80x55x20 cm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed. |
| 86 | Supply and fix waste fitting, 32 mm/40mm brass, chromium plated for sink, basin, etc with long screwed shank and fly nut compete all as specified and directed. |
| 87 | Supply and fix in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed. |
| 88 | Material and labour for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and directed. |
| 89 | Supply and fix in repair chromium plated grating doom with/without waste hole of size 110/125mm dia complete all as specified and directed complete all as specified and directed. |
| 90 | Dismantling water tank of capacity exc 500 litres & not exceeding 1000 ltrs and removing to store of any description complete all as specified and directed |
| 91 | Supply and fix 100 litre capacity rotational moulded three layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed. |
| 92 | Material and labour gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed. |
| 93 | Supply and fix in repairs soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 94 | Supply and fix in repair corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. |
| 95 | Supply and fix 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 96 | M&L for providing precast RCC cover slabs 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:4 as in (for drain, man holes,chajja, platform etc) and similar articles with plain faces and each cover slab covered in 6 Nos loop holes complete all as specified and directed |
| 97 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) |
| 98 | S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed. |
| 99 | S & F in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed. |
| 100 | S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as direted. |
| 101 | S&F PVC (SWR) bends with oval access door any radius of 110 mm bore complete all as specified and as direted. |
| 102 | S&F PVC (SWR) junction single T, equal or unequal of 110mm bore complete all as specified and as direted. |
| 103 | S&F PVC (SWR) junction single T, equal or unequal with oval access door of 110mm bore complete all as specified and as direted. |
| 104 | S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as direted. |
| 105 | S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and as direted. |
| 106 | S&F PVC (SWR) bends with oval access door any radius of 75mm bore complete all as specified and as direted. |
| 107 | Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 108 | Material and labour for 100 mm thick plain cement concrete type C1, (1:3:6) (using 20mm graded stone aggregate) as in sub , etc finished surface even and fair without using extra cement, complete all as specified and directed. |
| 109 | Material and labour for pre-polished chequered tiles rubber pressed glossy finish (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed. |
| 110 | M&L for providing cement concrete1:3:6 type C1 (20mm graded aggregate) as in copings,plinth courses including weathering,slightly rounded or chamfered angles and throating on edges complete all as specified and directed. |
| 111 | Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed. |
| 112 | Taking down sheet metal enclosure, DB & MCBs main switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed. |
| 113 | Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed. |
| 114 | Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed.Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. |
| 115 | All as per item Sl No 114 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed. |
| 116 | All as per item Sl No 114 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed. |
| 117 | All as per item Sl No 114 above but One 3 pin 5 amps socket out let point on independent board, with 1.5 sqmm multi stranded cable and earth wire with copper conductor of size 1.5 sqmm complete all as specified and directed. |
| 118 | All as per item Sl No 114 above but One bell/buzzer point controlled by one bell push, complete all as specified and directed. |
| 119 | All as per item Sl No 114 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed. |
| 120 | All as per Item No. 114 above but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point. |
| 121 | Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 25 mm medium grade concealed in wall of the size 2x6.0 Sqmm with earth wire of 1x6.0 Sqmm, complete all as specified and directed.PVC Conduit.Note:- one run of 3 x6.0 sqmm and conduit will be measured as one unit. |
| 122 | Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. |
| 123 | Supply and fixing for socket modular type single pole one way 6 amp 2 module 3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed. |
| 124 | Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed. |
| 125 | Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed |
| 126 | Supply & Fix modular motor starter 25A , 2 module for AC complete all as specified and directed. |
| 127 | Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed. |
| 128 | Supply and fixing Electric Bell Ding dong AC 230 volts, single phase, complete all as specified and directed. |
| 129 | Supply and fixing bell push switch modular type single pole one way 5 amp 240 volts, complete all as specified and directed. |
| 130 | Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 80 watts single pole complete all as specified and directed. |
| 131 | Supplying and fixing 20 Watt LED Tube light fittings complete with PVC body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 220 to 240 V , 50 Hz, CCT 6500K, THD<10% connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. |
| 132 | Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed. |
| 133 | Supply and fixing LED light fitting 10W bulk head luminaries made of diecast PVC housing with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 220 to 240V, 50Hz, THD<10%, lumen 100 lm /watt, 6500 K complete all as specified and directed. |
| 134 | Supplying and fixing 10 Watt LED Tube light fittings complete with pvc body including tube rod, driver with not less than 1000 Lumen O/P and I/p rated voltage 220 to 240 V , 50 Hz, CCT 6500K, THD<10% connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. |
| 135 | Supply and fix building security light LED 35 W with Lumen O/P 3500 with driver with rated voltage 220 to 240 V, 50Hz, IP 66 including mounting GI (made out of light grade GI pipe of suitable dia) 0.8 m bent two shape including clamps nut bolts etc. complete all as specified and directed. |
| 136 | Supply and Fix ceiling fan 1200 mm sweep complete with 3 blades controllable by regulator min 225 CFM air delivery BEE 5 star rated copper wound Brushless Direct Current(BLDC) motor including all accessories like down rod, electronic circuit board complete all as specified and as directed. |
| 137 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. all as specified and as directed |
| 138 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. all as specified and as directed |
| 139 | Supply and fixing Exhaust fan PVC body 250 mm sweep, 1200 RPM single phase, 230 Volts, 50Hz, 5 blades with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes in window frame of suitable size complete all as specified and directed. |
| 140 | Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door including dummy plates wherever required complete all as specified and directed. |
| 141 | Supply and fix MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA. |
| 142 | Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed. |
| 143 | Supply and fix MCB single pole & neutral 240 volt 32 amps 10 KA, \\"C\\" curve complete all as specified and directed. |
| 144 | Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, \\"C\\" curve complete all as specified and directed. |
| 145 | S&F in repairs energy meter boxes suitable to accommodate single phase energy meter with all connections made of metallic sheet and bakelite window complete all as specified and directed. |
| 146 | Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil(b) PCC pit in cement concrete 1:2:4 TYPE B-1(c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric(d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified.(e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead.(f) Requisite quantity of charcoal and common salt(g) Connection to earthing test point and testing on completion. |
| 147 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as specified and directed |
| 148 | Returning, filling in soils including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick complete all as specified and directed |
| 149 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed |
| 150 | Supply and lay GI tubing 50 mm dia, light grade for cable protection at road crossing / on poles and tubing sealed at both ends after laying the cables complete all as specified and directed |
| 151 | M&L XLPE insulated ,armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq mm 3.5 core complete all as specified and directed |
| 152 | S&F of HDPE double wall corrugated pipe confirming to IS -14930 Part with IP protection IP-67 having outer dia 50mm complete all as specified and directed |
| 153 | M & L for road/footpath cutting for laying of cable as repairing the same by using PCC 1:2:4 all as specified and as directed |
| 154 | Supply and lay pipe galvanized, “Medium class”, including fittings 50 mm (2”) dia. including Bends, increasing sockets/decreasing or double socket etc, complete all as specified and directed |
| 155 | Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia. including Bends, increasing sockets/decreasing or double socket etc, complete all as specified and directed |
| 156 | S&F Gun metal gate valve with iron wheel head screwed both end of size 50mm dia for iron pipe and fixed complete all as specified and directed |
| 157 | S&F Gun metal gate valve with iron wheel head screwed both end of size 25mm dia for iron pipe and fixed complete all as specified and directed |
| 158 | Excavation in trenches for laying of cable trench, pole and stay foundation in any type of soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out complete all as specified and directed |
| 159 | Returning filling in,including spreading,leveling watering and well ramming in layers not exceeding 25 cms thick. Complete all as specified and directed |
| 160 | Removing excavated materials to a distance not exceeding 50 Mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed |
| 161 | M&L for cutting cast iron/Galvanised Iron pipes and reducing to required length before laying or in position for insertion of new tees,branches, for upto 100 mm pipe etc complete all as specified and directed |
| 162 | Construction of stone masonry valve pit for Gate valve all as specified and as per drawing including plastering, PCC in foundation, Excavation and earth work in any type of soil, MS sheet cover 3mm thick sheet with locking arrangement painted with two coat of anti corossive paint over one coats of zinc chrome primer of 450X450X600mm (type 'B') for 50 mm valve complete all as specified and directed |
| 163 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 26,973.80] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender