Tender For Addition Alteration To Ops Room (P-135) At Af Station Madh Island Under Ge(Af) Thane
Tender Value
42.55 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
15 days left
EMD
85100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Ops Room (P-135) At Af Station Madh Island Under Ge(Af) Thane
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed by Engineer-in-Charge. |
| 2 | S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors, Frame works for floorings, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge. |
| 3 | S&F in repair for 35mm thickness Block boards, Grade 1 quality, exterior grade , commercial type fixed in false flooring as per grids size (area not exc .40 sqm) including cutting as per site requirement and fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 4 | S&F 3mm thickness cover fillets of standard hard board, 35mm wide and fixed with nails/screws to any type of boards as per directions, complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F 2mm thickness Linoleum sheet, plain coloured, is sealed down with an approved adhesive over PCC floors/ Wooden false/raised flooring boards of sizes not exc 1 sqm including stretching, cutting as per site requirement and fitting, and fixed over any type of boards with adhesives, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for cement concrete type B1 (20mm graded aggregate) 1:2:4 in walls or retaining wallls any thickness and size or shape including pilasters, butteresses columns, pillars and posts (including caps and bases) complete all as specified and directed by Engineer-in-Charge. |
| 8 | S&F Joist, channel, angle, or tee sections, vertical posts fixed independently, without connecting plates, etc. confirming to Fe 410- W (Gde- E-250) quality -A, complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F rolled sections as in main & cross beams , columns, hip and jack rafters , purlins where connected to common rafters and running rails & any other places with angles cleats or other connected plates, wind ties etc confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified and directed by Engineer-in-Charge. |
| 10 | S& F mild steel confirming to FE-290(Gde-E-165),(Flat sections) as in hand rails, foor doors, in wind ties and similar work including cutting to required length nothing ,drilling,fitting , connecting with nuts bolts and fixed in true position complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attahment, confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified and directed by Engineer-in-Charge. |
| 12 | Use & waste of rough finished formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roofcoverings, complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick and 150 GSM of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall at 5th floor, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 16 | Preparation of new steel surafces & apply two coats of synthetic enemal paint over a coat of red oxide, complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for preparation of old steel Surfaces and apply one coats of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 18 | M&L for preparation of old steel Surfaces and apply one coats of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender