Tender For Addition Alteration To Building No P-598 At Af Station Under Ge (Af) Jamnagar No.2
Tender Value
42.50 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
14 days left
EMD
85000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Building No P-598 At Af Station Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work / stone work / PCC block masonry built in cement mortar complete all as specified and directed. |
| 2 | Forming jambs,with cement mortar 1:6 etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed. |
| 3 | Excavation in trenches not exceeding 1.5 meters wide and 1.5 meters in depth and getting out in hard/dense soil including cutting of tree roots any size/ dia complete all as specified and directed.Note: The entire excavation work wiil be carried out by manual/labours. (Mechanical / mechinery will not be use). |
| 4 | Returning, filling including spreading, watering and well ramming in layers n.exc 25cm in soft/loose and hard/dense soil complete all as specified and directed. |
| 5 | Removing excavated material exc 1.5 km but n.exc 5.0 km and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 6 | M & L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4 type C1 (1:5:8) (using 20mm graded stone aggreagate), complete including demolition of old PCC and removal of debris outside of MD land all as specified and directed. |
| 7 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed. |
| 8 | M&L for 25 mm thick cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as in levelling concrete finished even and fair to receive floor finshes, complete all as specified and directed. |
| 9 | M&L for non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.11 sqm but n exc 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 10 | M&L for glazed ceramic tiles in vertical surface 300 x 450 x 7mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of mortar in CM 1:4 for laying wall tiles finishes complete all as specified and directed. |
| 11 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. all specified and directed. |
| 12 | M&L for rendering 10mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed . |
| 13 | M&L for rendering 15mm thick in CM 1:4 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed . |
| 14 | M & L for cement plaster 5 mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified and directed. |
| 15 | M&L for preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed. |
| 16 | M&L for preparation of new plastered surfaces of wall applying two coats of Acrylic emulsion (Exterior weather coat) paint of any tint as approved complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 18 | M&L for repairing of chajja / roof projection / roof spout by taking down old plaster applying 10 mm thick rendering in cement mortar 1:3 and finishing the surface even & smooth with out using extra cement and complete surface finish with two coats of exterior emulsion etc complete all as specified and directed. |
| 19 | Dismantling of kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc all as specified and directed. |
| 20 | M & L for machine cut & machine polished kota stone slab 18 to 20 mm thick as in kitchen plateform, treads of steps laid over and including 15 mm thick screed bed in CM 1:6, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed. |
| 21 | M & L for 18-20mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over and including cement mortar in 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 22 | M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar 1:3 complete all as specified and directed. |
| 23 | M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for Shelf and similar works supported on walls set in cement mortar 1:6 complete all as specified and directed.Note:- Reinforcement steel will be measured & paid separately. |
| 24 | M & L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 25 | S&F 15 mm size bib cock long body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. |
| 26 | S&F 15 mm size angle cock, cast copper alloy, chromium plated with long shank, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. |
| 27 | S&F 600 mm x 450 mm x 5 mm thick mirror selected quality, mounted on 4-5 mm thick water proof plywood (BWP grade), with aluminium angle beading all around, fixed on wall with nylon sleeve & cadmium plated screws complete all as specified and directed. |
| 28 | Supply and fix 1000 litres capacity, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified and directed. |
| 29 | S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 30 | S& F brass chromium plated shower rose 75 mm size with arms 15 mm inlet complete all as specified and directed. |
| 31 | S&F 15mm tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 32 | S&F 20mm rubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 33 | Supply and fix 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle, flush pipe 32 mm , PVC connection 450 mm fixed in position and connecting complete all as specified and directed. |
| 34 | S&F white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete all as specified and directed. |
| 35 | S&F white vitreous china wash hand basin of size 550 x 400 mm, fixed over & including MS brackets comprising of the following items :-(a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap fancy typev cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete. (c) LDPE/PVC waste pipe 32 mm dia 1000 mm long complete. |
| 36 | S&F 15mm PVC connection 45 cm long between ends with PTMT nut and washer complete all as specified and directed. |
| 37 | S & F health faucet brass chromium plated with flexible pipe, one GI Tee and one angle cock brass chromium plated 15 mm bore complete all as specified and directed. |
| 38 | S&F PVC (SWR) pipe 110mm bore in any length with rubber joints, laid in trenches or in floor complete all as specified and directed. |
| 39 | S&F PVC (SWR) bend any radious 110mm dia including necessary scaffoling upto 5 storeyies, fixed complete all as specified and directed. |
| 40 | S&F PVC (SWR) pipe 75mm bore in any length with rubber joints, laid in trenches or in floor complete all as specified and directed. |
| 41 | S&F PVC (SWR) bend any radious 75mm dia including necessary scaffoling upto 5 storeyies, fixed complete all as specified and directed. |
| 42 | S&F grating doom 125mm dia with waste hole of PTMT, fixed complete all as specified and directed. |
| 43 | Material and labour for 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs complete all as specified and directed. Note: The rate inclusive of scaffolding and necessary arrangements. |
| 44 | M & L for Powder coated Aluminium ventilators any colour (thickness of powder coating not less than 50 micron) anodised aluminium partitions, with using aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, sliding chanel witth roller, anodized aluminium snap beading screws etc inculding frosted glass 4 mm thick and fixed with wall complete all as specified and directed. |
| 45 | Supply fabricate & fix in position anodised aluminium powder coated (minimumthickness of powder coating 50 micron) three track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, (a) Frame (top & side) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jidal, Contractor may use similar section of other make mention in Appx B |
| 46 | Taking down chowkats or frame with shutter (with out taking off shutter from the frame) n.exc 1.5 Sqm complete all as specified and directed. |
| 47 | Taking down chowkats or frame with shutter (with out taking off shutter from the frame) .exc 1.5 Sqm and n. exc 4.0 sqm area of each complete all as specified and directed. |
| 48 | S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 49 | S & F 35 mm thick II class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed. |
| 50 | S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 51 | S & F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 52 | S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long, Aluminium tower bolt tower bolt 100 mm long and Aluminium handle 150 mm long complete all as specified and directed. |
| 53 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 54 | M & L for 100mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed. |
| 55 | S&F 150mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 56 | S&F 150mm long aluminium handle fabricated type anodised complete all as specified and directed. |
| 57 | S&F 300mm x 16mm dia aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed. |
| 58 | S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 59 | S&F 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 60 | S&F Mild steel hold fast and similar works fabricated with mild steel section conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 61 | M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) for fixing hold fast including necessary formwork, complete all as specified and directed. |
| 62 | M&L for preparing sufaces of new, previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and priming with pink primer and applying two coats of Synthetic Enamel paint complete all as specified and directed. |
| 63 | M & L for framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 64 | M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 65 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested including demolition of old PCC and removal of debris outside of MD land complete all as specified and directed. |
| 66 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed to 200mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested including demolition of old PCC and removal of debris outside of MD land complete all as specified and directed. |
| 67 | M & L for PCC 1:4:8 type D-1 (using 20 mm graded stone aggregate) as in bedding including haunching & packing under and against the side of pipe 300 mm bore, after they are laid and tested including demolition of old PCC and removal of debris outside of MD land complete all as specified and directed. |
| 68 | S&F 150 mm bore reinforced cement concrete pipes, class NP 2, laid and jointed with collars complete all as specified and directed. |
| 69 | S&F 200mm bore reinforced cement concrete pipes, class NP 2, laid and jointed with collars complete all as specified and directed. |
| 70 | M&L for 300 mm bore reinforced concrete hume pipes, class NP2, laid and jointed with collars complete all as specified and directed. |
| 71 | M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including demolition of old PCC and removal of debris outside of MD land complete all as specified and directed. |
| 72 | M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping bed plates, water trough and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work and finishing the surfaces even and smooth without using extra cement including demolition of old PCC and removal of debris outside of MD land complete all as specified and directed. |
| 73 | M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in benching, channels and the like including use of necessary moulds, etc. and finishing the surfaces even and smooth with using extra cement including demolition of old PCC and removal of debris outside of MD land complete all as specified and directed. |
| 74 | M & L for preparation of old distempered surfaces of wall, distempered surfaces and applying one coat of oil bound distemper on walls complete all as specified and directed. |
| 75 | M&L for complete removal of existing treatment on old surfaces including brooming down, scrapping down smoke soot, mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coat of Acrylic emulsion (Exterior weather coat) paint of any tint as approved complete all as specified and directed. |
| 76 | Removing building materials (Cement concrete any description, bricks, stone slab and tiles, bricks dust or mud etc) to a distance of 30 KM beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed by Engr-In-Charge. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations complete all as specified and directed. |
| 77 | M & L for concealed Point wiring with PVC insulated and unsheathed multistranded Fire retardant low smoke (FRLS) copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawn through heavy duty rigid non metalic PVC conduit not less 20mm dia including all accesories like bend,tess,junction boxes etc with all accessories suitable for moduler type fitmnet including making arrangement for fixing of moduler flush boxes of suitable size complete along with copper earth wire PVC insulated & unsheated multitranded (FRLS) copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and erth dolly complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or froof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. |
| 78 | (a) One Light point /Fan point controlled by one switch |
| 79 | (b) One 3 pin socket outlet 5Amps on the same board with other switches |
| 80 | (c) One 3 pin 5 Amp socket out let controlled by one switch on independent board |
| 81 | M & L for concealed Point wiring with PVC insulated and unsheathed multistranded Fire retardant low smoke (FRLS) copper conductor single core 2.5sqmm (nominal area) cable using approved colour code as per IS drawn through heavy duty rigid non metalic PVC conduit not less 20mm dia including all accesories like bend, tess, junction boxes, modular flush box, cover plate with frame etc with all and accessories suitable for moduler type fitmnet including making arrangement for fixing of moduler flush boxes and cover plate of suitable size complete along with copper earth wire PVC insulated & unsheated multitranded (FRLS) copper conductor cable of size 2.5sqmm as continous earth wire connected to common earth and erth dolly complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or froof treatment etc and finishing the surfaces with distemper/white washing / colour washing to match with the existing surface complete all as specified and directed. |
| 82 | All as per item No 78 above but wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 4.0Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as continous earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch. |
| 83 | M&L for ceiling rose, 2 to 3 terminal PVC / polycarbonate, isolated body type suitable for AC 230 volts complete all as specified and directed. |
| 84 | M & L for modular switch 1 way 6 Amp 1 Module complete all as specified and directed. |
| 85 | M &L for Modular Socket 6A 2/3 Pin universal 2 module, complete all as specified and directed. |
| 86 | M & L for Modular Switch 1 way 16/20 Amp 1 Module, complete all as specified and directed. |
| 87 | M &L for Modular Socket 16A/ 6A 2/3 Pin combined 2 module, complete all as specified and directed. |
| 88 | M &L for Modular fan step regulator 100 watt 2 module, complete all as specified and directed. |
| 89 | S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed. |
| 90 | S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed |
| 91 | Supply and fixing recess mounted LED luminaire with full diffuser 36 watt of 2x2 grid for new age work space, powder coated luminaire with minimum 100lm/watt efficiency,25000 to 50000 working hours and 6500CCT complete all as as specified and directed |
| 92 | S & F energy efficient BLDC Ceiling Fan, 1200mm sweep BEE 5 star rated, AC single phase, 230 volts, 50 Hz, and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to ceiling fan complete in all respect and all accessories complete all as specified and directed. |
| 93 | S&F for Exhaust Fan of 380 mm sweep metalic body (Heavy duty) single phase 230/240 volts, AC, 900 RPM complete and making holes with lovoured shutters including mounting frame and connecting the fan to ceiling rose including provision of three core flexible copper conductor cable of size 1.5 sqmm copper including to inside out surface & white wash etc with not less than 0.5mtr long to connection complete all as specified and directed. |
| 94 | Supply, fixing, Installation and testing of storage type water heater (Geyser) 25 Ltrs capacity, BEE 5 star rated with steel inner tank and polycarbonate outer body including pressure valve & electric supply connection complete including grouting with nuts & bolts of 15mm dia 100 mm long for hanging the geysers, including PVC connection 15mm dia, 450mm long heavy duty suitable for hot & cold water connections complete including plastering and finishing of disturbed wall surface as per existing finish complete all as specified and directed. |
| 95 | S&F building security in repair LED Light fitting 35 watt, system efficiency not less than 100 lumen / watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting including taking down old light fitting of any description complete all as specified and directed. |
| 96 | M&L Sub main wiring using PVC insulated and unsheathed multistranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed by Engr-in-charge of the following sizes of cables. . |
| 97 | Using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wireNote : 2 runs of 4 sqmm copper cable & 1 run of 4.0 sqmm copper cable in and including 20mm PVC casing and capping shall be measured as one unit |
| 98 | Using two single core PVC insulated FRLS cable 6 sqmm copper conductor multi stranded and 6.0 sqmm copper conductor insulated cable using as earth wire Note :2runs of 6sqmm copper cable & 1 run of 6.0 sqmm copper cable in and including 25mm PVC casing and capping shall be measured as one unit |
| 99 | Using two single core PVC insulated FRLS cable 2.5 sqmm copper conductor multi stranded and 2.5 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 2.5 sqmm copper cable & 1 run of 2.5 sqmm copper cable in and including 20mm PVC casing and capping shall be measured as one unit |
| 100 | M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 12 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management,reversible door for for IP 43, single pole and neutral 250 Volts, flush to wall complete with IP 43 protection complete all as specified and directed. |
| 101 | M&L for MCB single pole & neutral 240 volt C curve 10 KA (40 to 63) Amps capacity IP 20 complete all as specified and directed. |
| 102 | M&L for MCB single pole, 16 to 32 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed. |
| 103 | S & F industrial type plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket with 20 Amp MCB SP, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 104 | S & F industrial type plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket with 20 Amp MCB SP, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender