Bids Are invited for Custom Bid For Services - Illumination System For The Proposed New Road Along The Ash Pipelines From Wagon Tippler To Boundary Wall Inside Alumina Refinery, Damanjodi - Installation And Commissiong Of Sword Type Decorative Octago

Sharing tender

Bids Are invited for Custom Bid For Services - Illumination System For The Proposed New Road Along The Ash Pipelines From Wagon Tippler To Boundary Wall Inside Alumina Refinery, Damanjodi - Installation And Commissiong Of Sword Type Decorative Octagonal Single Arm Street Light Pole By Making New Rcc Foundation Suitable For 8 Mtr Gi Octagonal Pole As Per Desgin Derived From Strctural Calculation Considering Sbc As 10T Per Sq Mtr And Basic Wind Speed As 50Mtr/Sec. All Materils Required For Makeing The Foundation And Nut Bolts For Errection Of Pole Shall Be Under The Scope Of The Contractor. Loop In , Loop Out And Termination Of Cables At Gi Octagonal Poles Shall Be Under The Scope Of The Party Including Supply Of 02 Nos Of 16A Sp Mccb And Neutral Link For Each Pole. Supply Of The Pole Also In The Scope Of The Party. All The Work Shall Be Executed As Per The Direction Of The Eic. , Supply Of 4C X 10 Sqmm Stranded Aluminium Conductor, Hr Pvc (Type:C To Is:5831) Colour Coded (Red, Yellow, Blue, Black), Cores Laid Up, Inner Sheath Of Extruded Hr Pvc (Type:St-2) Galvanised Steel Round Wire Armoured Hr Pvc (Type:St-2) Outer Sheathed Cable Suitable For 1.1Kv Grade Conforming To Is:1554/P-1/88. The Size And Length Of The Cable Shall Be Embossed On The Outer Sheath Of The Cable At Every Meter Length. , Supply Of 3.5C X 70 Sqmm Stranded Aluminium Conductor, Hr Pvc (Type:C To Is:5831) Colour Coded (Red, Yellow, Blue, Black), Cores Laid Up, Inner Sheath Of Extruded Hr Pvc (Type:St-2) Galvanised Steel Round Wire Armoured Hr Pvc (Type:St-2) Outer Sheathed Cable Suitable For 1.1Kv Grade Conforming To Is:1554/P-1/88. The Size And Length Of The Cable Shall Be Embossed On The Outer Sheath Of The Cable At Every Meter Length. , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Brick Protective Covering And Refilling The Trench Etc. As Required (Up To 70 Sqmm) , Supply And Installation Of Complete Chemical Earthing System, Making Of Earth Pits Including Excavation In Hard Soil Of Size 10 Ft. X 2 Ft. X 2 Ft. Or 6Dia X10 Feet Depth Drill Hole, Resurfacing With Black Cotton Soil, Including Supply Of High Conductive Rust Free Copper Coated Earth Electrode, Special Earth Enhancement Compound (Minimum 50 Kg), Electrode Cl , Copper Strip For Connection Between Earth Pit And Equipment, Complete With Brick Chamber And Rcc Cover.(Make-Erico, Obo Betterman. , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess Or Excavated Trench For Loop Earthling / Continues Earthing. , Supply And Instalation And Testing Of Led Street Light Fitting Of 90W With Complete Set With Pressure Die Cast Aluminioum Houseing With Ip66 Protection , Supply And Laying Of 3Cx2.5 Sqmm Pvc Sheeted Copper Flexible Cable Inside Octagonal Gi Poles And From Ab Cable To Street Light Fitting Through The Pre Installed Gi Bracket , Supply And Installation Of Out Door Type , Weather Proof Timer Controlled Feeder Panel With Provision For Auto / Manual Selection With By Pass Arrangement As Per Specification . 1. Incoming: 1 No 63-A 4P Mcb Type Isolator Followed By 1 No 70-A 3P Ac3 Duty Power Contactor. 2. 1 No Programmable Astro Timer Switch.3. 1 No Bypass Toggle Switch.4. Outgoing: 9 Nos. 25-A 2P Mcb. , End Termination:-Termination On Switchgear, Transformer, Feeder Piller, Street Light Marshalling Boxes, Pole Top Boxes, Lighting Control Panel Of Following Sizes Including Connection Of Leads Cutting Stripping Of Cable Insulation, Providing Compression Type Terminals, Crimping Of Cable Including Supply Of Double Compression Cable Glands, Lugs Etc. And All Labour, Supply Of All Material Complete As Per Direction Of Engineer –In-Charge. , Supply And Fixing Of Medioum Class Pvc Flexible Conduit Of 50Mm Size With Accessories In Surface/Recess /During Casting Including Cutting The Wall Etc As Directed By The Eic. , New Installation Of Welding Receptacle/ Sfu: Supply & Fixing Of Welding Socket Of Rating 125A Including Fabrication Of Suitable Base Frame On The Steel Structures By Welding Or On To The Wall / Concrete Beams By Grouting, Fixing The Welding Socket On To The Frame With Nut And Bolts, Socketing, Connection Of Incoming And Out Going Cables, Glanding Painting The Base Frame With One Coat Of Primer & Two Coats Of Paints,Earthing, Providing Canopy Over The Welding Out Lets And As Per The Direction Of Engineer-In-Charge. All The Consumable Required To Complete The Work Is In The Scope Of The Party.