Tender For Up-Gradation Of Phc (N)Tyendakuda Under Ama Hospital Initiatives Of Garadapur Block In The District Of Kendrapada For The Year 2024-2025.
Tender Value
62.63 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
10000
Bank guarantee accepted
Document Fee
62700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Up-Gradation Of Phc (N)Tyendakuda Under Ama Hospital Initiatives Of Garadapur Block In The District Of Kendrapada For The Year 2024-2025.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in all kinds of soil including dressing and leveling the bed upto the required depth and depositing the excavated materials with all leads and lifts T&P shoring & Shuttering if required etc.complete as directed by the Engineer-in-charge. |
| 2 | Supplying filling in foundation and plinth with sand including watering ramming, cost, conveyance, royalties and all taxes of materials and cost of labour with T&P required for the work etc. complete(measurement will be taken on finished section only etc.complete as directed by the Engineer-in-charge. |
| 3 | Providing Cement concrete (1:3:6 ) using 40mm. size hard crusher broken grinite metal of approved quality from approved quarry in foundation and plinth including hoisting , lowering , laying in layers not exceeding 0.15mt. in thick , compacting , water curing with all cost, carriage, royalty, all taxes, labour & T. & P. etc. complete as per specification and direction of E.I.C. |
| 4 | Cement Concrete (1:2:4) with 12mm size hard granite chips for RCC works includimg hoisting and laying etc complete as per direction of the engineer-in -charge. |
| 5 | R.C.C.work of M-20 having a minimum comprresive strength (in work test) 250 kg/Cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 using 12mm size black hard crusher broken granite chips including hoisting,lowering laying and compacting concrete by using vibrator with watering and curing for 28 days centering and shuttering and finishing the exposed surface smooth providing grooves or beds whereever necessay including cost conveyance,royalties and all taxes of all materials and cost of all labour with T&P required for the work etc.complete in all respect but excluding cost of M.S.Rods or Tor Steel and binding wires and labour charge for bending binding and tying the grills etc.complete in all respect as per direction of Engineer-in-charge. (A) Column Base & Foundation :- |
| 6 | B) Plinth Beam :- |
| 7 | C) Column :- Upto Plinth |
| 8 | Above Plinth |
| 9 | (D)Wall Beam |
| 10 | (E) Roof Slab |
| 11 | (F) Lintel |
| 12 | (G)Chajja |
| 13 | Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire cost and conveyance of HYSD bars complete in all respect as per specification for road & Bridge and direction of Eng - in Charge. |
| 14 | 20mm thick grading plaster in C.M.(1:4) over roof slab including watering and curing etc. with cost conveyance royalties and taxes of all materials and cost of all labour and T&P required for the work etc. complete as per the direction of the Engineer-in-charge |
| 15 | Fly Ash brick ,masonary in cement mortar (1:6) in F&P using flyash bricks of 25cmx12cmx8cm size having a crushing strength of not less than 75kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use etc., complete, including cost and conveyance of all materials and labour required for the work with all taxes and royalties etc. with all T&P complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 16 | Fly Ash brick ,masonary in cement mortar (1:6) in Super structure using flyash bricks of 25cmx12cmx8cm size having a crushing strength of not less than 75kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use etc., complete, including cost and conveyance of all materials and labour required for the work with all taxes and royalties etc. with all T&P complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 17 | Providing and fixing of Vetrified (johnson) tiles of 600x600mm size plain evory in floors treads of steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing with all cost,conveyance ,taxes of all marbles /tiles, labour with T & P required for the work etc.complete as per specification and direction of the Engineer-in charge. |
| 18 | Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. complete in all respect as per the direction of Engineer in Charge. |
| 19 | Providing and fixing of Granite tiles in walls treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles Including rubbing and polishing with all cost,conveyance ,taxes of all marbles /tiles, labour with T & P required for the work etc.complete as per specification and direction of the Engineer-in charge. |
| 20 | 16mm(5/8\\") thick cement plaster (1:6)in finished smooth to inside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. |
| 21 | 12mm(1/2\\") thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. |
| 22 | 12mm(1/2\\")thick cement plaster (1:4) in all floors over brick work finished smooth including cement punning including watering, curing, cost conveyhanace, royalty and all taxes of all materials and labour with T&P required for the work etc.complete as per direction of Engineer-in-charge. |
| 23 | Supplying,fitting and fixing of GI grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete.(prevaling lowest local market rate and excluding labour for fixing ) as per direction of Engineer In Charge. |
| 24 | Painting two coats in all floors to new wood and iron work over a coat of primer including sand papering,polishing the surface,including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge. |
| 25 | Finishing surface of wall with cement based wall putty (Water Based) of approved make & finished smooth and even surface to receive painting including cost of all materials etc. complete as per the specification and direction of the Engineer-in-charge |
| 26 | Distempering two coat over one coat of primer including cost of distemper & primer, cost conveyance and all taxes of all materials and labor with T&P required for the work etc.complete in all respect etc. complete as per direction of Engineer in charge. |
| 27 | Wall painting two coats over one coat of primer with weather coat of approved shade on wall surface including cost of weather coat and all materials labour T & P etc complete as per direction of the Engineer-in-Charge. |
| 28 | Suppling and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC)(FENESTA/NCL VEKA LTD.)Casement Door-60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 25 mm for outer frames,102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5 mm mullion profile capable of mounting single glazing sustem,structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & weldewd through fusion welding the door sash shall be fitted with 12 mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminum 1 No. per set of sashes and the system is to be installed at the site using anchore fasteners,silicon rubber sealent,easy glazing/deglazing at site etc.,including cost and conveyance of all materials,accessories,labour charges,materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. |
| 29 | Suppling and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC)(FENESTA/NCL VEKA LTD.)Three panel sliding window-60-series duly manufactured using UPVC reinforced profile of 108 mm x 45 mm x 2.5 mm for outer frame and Window Sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing sustem,structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & weldewd through fusion welding the door sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using reinforced Larg coupler at the site using anchore fasteners,silicon rubber sealent,easy glazing/deglazing at site etc.,including cost and conveyance of all materials,accessories,labour charges,materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. |
| 30 | Supplying ,fitting & fixing of stainless of 304 grade in hand railing using 50mm dia of 2mm thick Square pipe with Balustrade of size 32mmx32mm x2mm @ rate 0.90mtr . c/c and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing , polishing etc with cost ,conveyance, taxes of all materials , labour, T&P etc. required for the complete in all respect. |
| 31 | Supplying,fitting and fixing of M.S. iron grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete.(prevaling lowest local market rate and excluding labour for fixing ) as per direction of Engineer In Charge. |
| 32 | Providing laying 80 mm thick cement concrete inter locking paver brick of M35 grade and of approved make veraity colour and size by block making machine with strong vibratory compaction of approved design and shape laid in required colour and parteen 50mm thick compacted bed of course sand etc. complete. |
| 33 | Dismantling brick or stone masonry in lime or cement mortar under 3mt. height and removing debric 50mt. lead from working area etc. Including all cost, conveyance, all taxes etc complete as per direction of the Engineer-in-charge. |
| 34 | Dismantling and removing R.C.C.columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing debris within 50mt. lead etc complete as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender