Tender For Restoration/Preservation Of Aasari Sharief Jenab Sahib Anchar Soura (Spring).
Tender Value
1.42 Crore
Estimated cost
Bid Submission
02 Sep 2026
0 days left
EMD
2.85 Lakhs
Bank guarantee accepted
Document Fee
2200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration/Preservation Of Aasari Sharief Jenab Sahib Anchar Soura (Spring).
BOQ
| Sl. No. | Item Description |
| 1 | Civil Part |
| 2 | Dismantalling of damaged chain link fencing and stackinng of same |
| 3 | Dewatering of Spring during execution of work through 10HP pump |
| 4 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 5 | Demolishing cement concrete manually/by mechanical means including disposal of material beyound muncipal limits as per direction of Engineer-incharge: 15.2.1 1:3:6 or richer mix (i/c equivalent design mix |
| 6 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on planincludingdisposalofexcavatedearth,leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 7 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :. |
| 8 | P/L of stone soling hand packed including carriage,watering and hand ramming complete job. |
| 9 | Providing and laying in position cement concrete 1:4:8 of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 10 | Providing and laying in position cement concrete including curing but excluding the cost of centering, shuttering, finishing 1:2:4 mix |
| 11 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: 7.1.1 Cement mortar 1:6 (1 Cement : 6 coarse sand) (Quarry) |
| 12 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 15 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 16 | Columns, pillars, piers, abutments, posts and struts. |
| 17 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed (fine chisel dressed ) |
| 18 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 19 | Labour charges for removing and refixing of Devri Stone after cleaning and dressing throgh sikilled mason |
| 20 | Providing and laying chisel dressed Devri Stone of any size face with 75 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed .complete in all respects(devri/ash/green/grey)local |
| 21 | Providing and fixing 25mm thick Devri tiles of any size as approved by Engineer- in-Charge, in walls etc fixed over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 22 | Providing and fixing M.S. Ornamental grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including Cast iron fixture at top &priming coat with approved steel primer all complete. |
| 23 | Providing and fixing of Colour coated tile profile sheet roofing 0.50mm thick complete in all respects incl ridges/valley etc. |
| 24 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First Class Budloo wood |
| 25 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position.kiln seasoned hallock wood. |
| 26 | Providing and Fixing of 12mm thick plywood over the frames |
| 27 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Changez Khani 12 |
| 28 | Providing and fixing of cast iron wooden benches of 5ft length |
| 29 | Providing and fixing plained eaves boarding. 12.69.1 2nd class Deodar wood 12.69.1.1 250x32 mm (nominal size) |
| 30 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm of approved brand and manufacture |
| 31 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 32 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (matt) Size of tile 600x600 mm |
| 34 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 35 | ppr 25 mm pipe |
| 36 | ppr 25 mm union |
| 37 | ppr 20 mm |
| 38 | ppr 20 mm union |
| 39 | 100 mm pvc waste pipe(B Type) |
| 40 | 75 mm pvc waste pipe (B Type) |
| 41 | ppr ball valve 32mm |
| 42 | ppr ball valve 25mm |
| 43 | 40mm pvc pipe |
| 44 | pvc floor trap |
| 45 | Providing and fixing white vitereous china of approved make wall hung EWC with concealed cistern complete with seat cover and all fittings and fixtures. |
| 46 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass single hole basin mixer of approved quality and make including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass single hole basin mixer |
| 47 | Vitreous china pedestal |
| 48 | CP angle valve |
| 49 | CP towel rail |
| 50 | CP soap tray |
| 51 | CP 100mm grating |
| 52 | PVC connection pipe |
| 53 | Cp waste coupling |
| 54 | Flexible waste pipe 1.25\\" |
| 55 | CP Short body bib cock |
| 56 | aluminium handle 8\\" |
| 57 | T bolt 8\\" |
| 58 | Link lock 8\\" for doors |
| 59 | P/f of stainless steel railing made of Grade 304 stainless steel with 50mm dia handrail, 38mm dia vertical posts and 19mm dia intermediate members incl cutting,welding,polishung,anchoring and fixing complete as per approved design and specifications |
| 60 | Carriage of different Material from source to site of wok |
| 61 | Stone agg 20 mm from av lead of 10Km |
| 62 | Stone agg 40 mm from av lead of 10Km |
| 63 | Electric Part |
| 64 | Supply, installation,testing and comm. of ornamental decoralive ast iron poles of Dwarka india ( cat No. DLP 2.30 101) /rarara iujasseme of equivalent make/design (as per approvcd 5amplc) with 15\\" base 120\\" (3 Mtr) hlph, namelrd coated with antirur finish provide with pro built in control prar b0 itterl vith connedot and 1-3 amp MCD of leprand makr thr pole hsll hr erected on suitable shallow foundation with 12 ^ toncretof to br paid sepcrately) Block shall have sultalble space for incoming and out-going cables. |
| 65 | Supply and fixing: of ornanental .I bracket palnted with ant) corrisive enemal palnt as per deslgn, of Dwarka lndla ( cat No. DBR 007) /Karara Mujasseme of cqulvalent makc/design ( as perapproved sample) The bracket should have a provlslon of fixing |luminaries of Glovvmac/Green arrow. ( as per approved sample-2 way) |
| 66 | Providing of cement concrete block 2ft. underground and 1 It. above G.L. with dia upto 1.5' including grouting 4 no foundation bolts, along with 2 No. templates for errrection of the pole, cement concrete to be carried in 1:2:4 mix. Including its shuttering, etc.complete job |
| 67 | Supply fixing testing and comm.of decorative ornamental translucent luminarie having lP-65 protection ( glowmac ( Amphore-PRISMATIC-A-300PC-201 ) / bajaj/havell equivalent make) |
| 68 | s/FT/C of 18-22 Watt LED Philips/ Havell /Crompton greaves make. |
| 69 | S/L, testing and commissioning of, XLPE Insulated, PVC Alluminium armoured cable 650 v/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass |Compression gland and aluminium lugs of required size.a) 10 sq.mm 4 core |
| 70 | S7Lestng a¡ CommmssTOiNg Or T POWer taote,COpper conductor ,xLPE Insulated, unarmoured cable 650 V/1100 v Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Copper cable Havell/Eq. standard make as desired by the engineer incharge and making end termination with brass compressionleland and copper lugs of required size. b)6 sq.m1n 4 core(un-armoured) |
| 71 | Providing of service connection and earthings to luminaire from|the junction box in 1.5 mm PVC insulated, multicolour copper |
| 72 | Earth work excavation for cable trench, 2 ft deep with an average breadth of 1.5ft including refilling of trench with excavated earth after laying of cable and ramming it properly excluding cost of cable.the job also includes laying of warning tape, and sand layer below and above the cable. |
| 73 | Supply and installation of Spira) earthing through 10 swg Gl wire ater driving in ground up to a depth of 3' in the ground from the base of the pole |
| 74 | oviding of cartling by way of digging 10 decp pt then embedding '2*2', 5mm thick copper plate (connecting the plate with t control board by 10 SWG Copper vale with 1/2\\" dia Full thread brass nut and bolt and washers,refilling of pit alternate layers of salt coala earth. |
| 75 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (90 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (63 mm dia(OD-63 mm & ID-51 mm nominal) |
| 76 | Desiçn, Fabrication, Supplying, Installation, Testing and Commissioning of following panel nade out of 2mm thick M.S. sheet, floor/wall mounted, vermin and dust proof, outdoor |with type suitable size of angle iron leg5 grouted in the cenent |concrete., with lockable type hinged doors, duly painted with provision for fixing of incomer MCCB, outgoing DP MCBS, sets of |Aluminium Bus Bar of different rating. after taking Derating factor into account, and other allied accessories etc. as required. the panel to be fabricated from reputed firm duly approved by CPRI.as per approved design, size may vary as per site requirement) |
| 77 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc as reauired |
| 78 | INCOMING: |
| 79 | 63A 4P MCCB 16 KA Legrand/ Shinider/ Eq. standard make. |
| 80 | b) 4 No. of Aluminium Bus Bar of 100 Amp. |
| 81 | c)Digital meters and phase indicators -1 set. |
| 82 | Astronomical timer with 4 pole contactor of suitable capicity. Legrand/ L&T/Schineider mak |
| 83 | OUTGOING: |
| 84 | a) 63 amp TPN MCB C Curve 10 KA Legrand/ Shinider/ Eg. Standard make. |
| 85 | b)space for 8 way MCB'S Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender