Tender For Construction Of Gravel Filling, One Side Water Drain, Generator Shed, Crack Filling And Painting Of Existing Generator Base Structure At Electrical Substation-2, Svnit, Surat.
Tender Value
9.35 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
18800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surat → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Gravel Filling, One Side Water Drain, Generator Shed, Crack Filling And Painting Of Existing Generator Base Structure At Electrical Substation-2, Svnit, Surat.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, laying, spreading and compacting by manual means in layers not exceeding 150 mm thickness each, stone aggregate of nominal size 40 mm at all leads and lifts, including spreading, watering, well ramming, compaction by plate vibrator, dressing and finishing the top surface to the required line, level, camber and slope for proper drainage of rainwater complete as directed by the Engineer-in-Charge. The stone aggregate shall be procured from Government-approved quarry/source, and the contractor shall submit valid Royalty Receipts/Transit Passes for the entire quantity before payment. The rate includes cost of materials, royalty, loading, unloading, transportation, labour, machinery, tools and plants, water and all incidental charges complete. (As per Approved Rate Analysis).Note: If the aggregate is procured by weighbridge, payment should be based on the actual weighbridge slips/royalty passes. If the contract specifies another bulk density (e.g., 1.55 or 1.70 t/m³), the payable quantity should be revised accordingly. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, for all lift, including getting out the excavated soil and disposalof surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (DSR Item No.2.8.1) |
| 3 | Filling available excavated earth in layers, watering and ramming complete. Filling available excavated earth (excluding rock) in trenches, plinth, sidesof foundations etc. in layers not exceeding 20cm in depth, consolidatingeach deposited layer by ramming and watering, lead up to 50 and for all lift. (DSR Item No. 2.25) |
| 4 | Providing and laying PCC 1:4:8 (40 mm graded stone aggregate) in drain bed. 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived fromnatural sources : 8 graded stone aggregate 40 mm nominalsize derived from natural sources) (DSR Item No. 4.1.8) |
| 5 | Random Rubble Stone Masonry in Cement Mortar 1:6 for side drain.Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR Item No.7.7.1) |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer all complete. (DSR Item No.10.2) |
| 7 | Providing and fixing 0.50 mm thick colour coated GI roofing sheet including ridge, flashing, fasteners and accessories complete. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR Item No.12.50) |
| 8 | Painting on structural steel with one coat of red oxide primer and two coats of synthetic enamel paint complete.Factory made 50mmx47 mm with a wall thickness of 5 mm door frame PVC extruded sheet including carriageTwo or more coats on new work (DSR Item No.13.61.1) |
| 9 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including priming coat of exterior primer applied @ 0.90litre/10 sqm) (DSR Item No. 13.46.1) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender