Tender For Provn Of Temp Parking Shed At Med Regt And Certain Other Sanctioned Work At Faridkot Mil Stn
Tender Value
9.63 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
20 days left
EMD
19260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridkot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Temp Parking Shed At Med Regt And Certain Other Sanctioned Work At Faridkot Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm |
| 3 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 4 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation & mass concrete etc complete all as specified. |
| 5 | Formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffits of foundation and plinth beam and similar wk vertical or to batter. |
| 6 | M&L RCC M-25 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases beams; under-reamed piles slabs, under-reamed piles and mass concrete. |
| 7 | M&L RCC M-25 (20mm graded aggregate) in Columns, Pillars, Piers Posts and struts |
| 8 | S&F MS TMT Bars of 10 mm dia and over,cut to length,bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire (annealed) not less than 0.9 mm dia or securining with clip all as specified. |
| 9 | S&F MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders,cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire annealed not less than 0.9 mm dia or securining with clip all as specified. |
| 10 | M&L Brickwork with fly ash Old size bricks straight or curved on plan exc 6 m mean radius wall built in cement mortar 1:6 all as specified. |
| 11 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or slidingwith and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 12 | Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic paint over one coat of red oxide primer complete all as directed. |
| 13 | S&F Glazed ceramic tiles (coloured tiles) in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work |
| 14 | M&L for Surface Excavation, not exceeding 30 CM deep and averaging 15cm deep and getting out in soft / loose soil complete All As specified and directed by Engr in Charge. |
| 15 | M&L for 150mm spread thickness soling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified. |
| 16 | M & L Sand cushion (25 mm thick) filling under floors or in foundation including watering and consolidated complete all as specified and directed. |
| 17 | Supply & fix rubber moulded pressed precast cement concrete interlocking paver blocks any shape and size conforming to IS-15658 -2006 of 80 mm thick M-35 grade with gray cement and pigment All as specified and directed. |
| 18 | Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, |
| 19 | M&L for Roof trusses (framed),tubular vertical post, fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,tubular pole) including distance pieces, cleats etc. |
| 20 | S&F Rolled Mild steel Plates (plain or Chequred) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - O or Fe 310 - O. |
| 21 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet (ISI Marked) 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screw all as specified and directed. |
| 22 | M&L Rendering 15 mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 23 | M&L preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint over a prime coat complete all as specified and directed by Engr -in - charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender