Tender For Dnit For The Work Of Repair And Replacement Of Public Health Fixtures/Services At Various Government Residential/Non-Residential Building At Ward No. 4,5 & 6 Under The Jurisdiction Of Sde Mcph Sub Division No. 20, Sector-13 Manimajra Chand
Tender Value
4.97 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
0 days left
EMD
9949
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dnit For The Work Of Repair And Replacement Of Public Health Fixtures/Services At Various Government Residential/Non-Residential Building At Ward No. 4,5 & 6 Under The Jurisdiction Of Sde Mcph Sub Division No. 20, Sector-13 Manimajra Chandigarh. Approx. Amount : Rs.4,97,430/- Earnest Money : Rs.9,949/- Time Limit : .04 Months
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 15 mm dia nominal bore .(DSR 18.10.1) |
| 2 | 20 mm dia nominal bore.(DSR 18.10.2) |
| 3 | 25 mm dia nominal bore.(DSR 18.10.3) |
| 4 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore (DSR 18.46.1) |
| 5 | 20 mm nominal bore (DSR 18.46.2) |
| 6 | 25 mm nominal bore (DSR 18.46.3) |
| 7 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) ::20 mm nominal bore (DSR 18.17.1 A) |
| 8 | 25 mm nominal bore (DSR 18.17.1 ) |
| 9 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : Make:- Cera/Parryware 15mm nominal bore (DSR 18.49.1) |
| 10 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.Make:- Cera/Parryware 15mm nominal bore (DSR 18.50.1) |
| 11 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.Make:- Cera/Parryware 15mm nominal bore (DSR 18.52.1) |
| 12 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) Make:- Cera/Parryware 15mm nominal bore (DSR 18.53.1) |
| 13 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White (DSR 17.18.1) |
| 14 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (DSR 17.7.4) |
| 15 | Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122mm long, weighing not less than 99 gms (DSR 18.54.2) |
| 16 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore (DSR 18.21.2.1) |
| 17 | Providing and fixing of PVC waste pipe 32mm (NSI) |
| 18 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR 18.48) |
| 19 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore (DSR 18.18.2) |
| 20 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm (DSR 17.13.2) |
| 21 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. (DSR 17.15) |
| 22 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (DSR 17.16.A) |
| 23 | Credit against old material Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender