Tender For Supply Installation Testing and Commissioning of Access Control System Work In The Construction Work Of Sub District Hospital Sikrai, Distt. Dausa.
Tender Value
1.94 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
6 days left
EMD
3880
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dausa → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of Access Control System Work In The Construction Work Of Sub District Hospital Sikrai, Distt. Dausa.
BOQ
| Sl. No. | Item Description |
| 1 | SITC of Access Control System |
| 2 | STIC of Finger Print Access Control System having Operation System Linux, Size 4.3 inch. Resolution 800x480, Operation Method Capacitive Touch Screen, Pixel 2MP, Network Interface, RS-485, Exit Button, Door Contact input, USB 2.0,Card Capacity, 1500 or better, Fingerprint Capacity 1500 or better. Event Capacity 150000, Card Type Mifare I card, Card reading distance 0 to 3 cm, Power Supply 12VDC/2A, including metalic push button complete in all respect. |
| 3 | Supply of Mifare RF card Non Contacting IC Card having working distance no more than 100mm (Depends on the antenna dimension). Working Frequency: 13.56 MHz. High Data Transmission speed: 106 kbit/s, Anti-Conflict. 1 kbyte (16 zones. 4 sections per zone, 16 bytes per section). Long time data storage: 10 years, Only one serial No. for one card complete with all respect. |
| 4 | SITC of Electro magnetic single leaf lock having power supply and Maximum thrust 280 Kg (617 Lbs) liner thrust, Input Voltage 12VDC/24VDC, Working Current 12V/500mA, 24V/250 mA, LED indicator Red: Door is unlocked and Green: Door is locked, Suitable for wooden, Glass, Metal door complete with mounting bracket as required. |
| 5 | PART 'A' : ELECTRIC WORK |
| 6 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge. |
| 7 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) 25MM PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. |
| 8 | 25 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender