Tender For repair renovation To Various Residential Buildings Under Division No Iii Shimla. (Sh:- Renovation Of Set No D- Iii /27 Kitchen ,Toilet, Bath With Necessary Fittings, Painting , Distempering Work At Nabha Estate Shimla.)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Aug 2026
6 days left
EMD
6190
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair renovation To Various Residential Buildings Under Division No Iii Shimla. (Sh:- Renovation Of Set No D- Iii /27 Kitchen ,Toilet, Bath With Necessary Fittings, Painting , Distempering Work At Nabha Estate Shimla.)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres leadcomplete including carriage of materials within all leads and lifts.For thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in -charge Nominal concrete 1:3:6 or leaner mix (i/c equivalent design mix) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm. |
| 5 | Providing and fixing vitrified wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 6 | Providing and fixing 12mm thick shuttering ply/ water proof ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge (Frame work for base to be measured & paid for separately) |
| 7 | Providing and laying1.50mm thick PVC/rubber tiles flooring plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately)for payment including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 8 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all completeincluding carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge. (Note:- Butt hinges and necessary screws shall be paid separately) Deodar wood wood 40 mm thick shutters |
| 9 | Providing and fixing wire gauge shutters using galvanised M.S. wire guage of IS. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey wondows including bright finished black namelled iron hinges with necessary screws etc. complete including carrage of material within all leads and lifts. 40 mm thick in 2nd class deodar wood |
| 10 | Providing and fixing aluminium Sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge : 250x10mm |
| 11 | Providing and fixing aluminium tower bolts (barrel type) with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge (i)250x10mm |
| 12 | Providing and fixing aluminium tower bolts (barrel type) with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge.(i) 150x10mm |
| 13 | Providing and fixing aluminium handles, ISI marked,or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 125mm |
| 14 | Providing and fixing aluminium handles, ISI marked,or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 100mm |
| 15 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 16 | Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 17 | Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 18 | Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 19 | Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 20 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts. |
| 21 | Providing and fixing Brass furniture handles with screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 100 mm |
| 22 | Applying priming coat: With ready mixed pink or Grey primer ofapproved brand and manufacture on woodwork (hard and soft wood) |
| 23 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture on new wood surface complete as per directions of Engineer in Charge. |
| 24 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade in ceiling and slopy roof : Old work (one or more coats) over and including water thinnable priming coat with cement primer complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 26 | Painting wood work with Deluxe Multi Surface Paint of required shade One or more coat applied of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 27 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.50 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete |
| 28 | Disposal of building rubbish/ malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 30 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charges :-110 mm X 90 mm |
| 31 | Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 32 | Providing and fixing CP Brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.645 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 33 | Providing and fixing 15mm dia C.P.brass Bib cock short body of approved quality including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 34 | Providing and fixing 15mm dia C.P.brass Angle cock short body of approved quality including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 35 | Providing and fixing charomium plated soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 36 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 37 | Providing and fixing CP Brass towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 38 | Providing and fixing stainless steel kitchen sink 610mm X 510mm with bowl depth 200mm size with drainage board of approved make with C. I. or M. S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 39 | Providing and fixing 550mmx400mm flat back vitreous China wash basin with pedestal and brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 40 | Providing & fixing C.P waste for wash basin or sink including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 41 | Providing and fixing Sink mixer of approved quality including fittings etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 42 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 43 | Providing and fixing bevelled mirror 600 x450 mm ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 44 | Providing and fixing 45cm length UPVC connection pipe with brass unions 15 mm nominal bore complete including carriage of materials within all leads and lifts. |
| 45 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work -including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 15mm nominal bore |
| 46 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge :15mm nominal bore |
| 47 | Providing and fixing 110mm nominal size high pressure PVC (finolex) Type-B spigot and socket, waste and ventilating pipes ISI marked with collar and clamps including fixing with approved adhesive etc. complete. including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 48 | Providing and fixing 110 mm dia PVC Finolex Collar ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 49 | Providing and fixing 110mm nominal size PVC Finolex plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 50 | Providing and fixing 110 mm dia PVC Finolex plain tee ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender