Tender For annual repair & maintenance of To Residential Block Under Urban Division Shimla (Sh:- Renovation Of Set No - O - Ll / 110 I.E. Is Rooms Flooring , Kitchen, Toilet, Bath C.B With All Neccessay Fitting, Painting & Distempering Work Etc. At N
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Aug 2026
2 days left
EMD
5400
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of To Residential Block Under Urban Division Shimla (Sh:- Renovation Of Set No - O - Ll / 110 I.E. Is Rooms Flooring , Kitchen, Toilet, Bath C.B With All Neccessay Fitting, Painting & Distempering Work Etc. At Nabha Estate )
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or leaner mix (i/c equivalent design mix) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., 600 x 600mm |
| 5 | Providing and laying Vitrified tiles in different sizes(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete 1200x600 mm |
| 6 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 40mm thick 2nd class deodar wood. |
| 7 | Providing and fixing wire gauge shutters using galvanised M.S. wire guage of IS. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey wondows including bright finished black namelled iron hinges with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 40 mm thick in 2nd class deodar wood. |
| 8 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 250x16mm |
| 9 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge :(i) 200x10mm |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge :(i) 150x10mm |
| 11 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 10 as per IS: 1868) transparent or dyed to required colour or shade, withnecessary screws etc. including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 125mm |
| 12 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 10 as per IS: 1868) transparent or dyed to required colour or shade, withnecessary screws etc. including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 100mm |
| 13 | Providing and fixing 19mm thick Commercial Board shutters for cup boards i/e fixing with nickel including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 14 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete). including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 15 | Providing and fixing 0.80 mm thick coloured or plain laminated sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 16 | Providing and fixing 6 mm thick commercial ply wood in ceiling/flooring/ wall lining of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately)including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 17 | Providing and fixing hard wood plain square edged cover fillets (beading) 19mm x 6mm section with wood screws in ceiling and liningincluding carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 18 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 19 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge : (i) 100 mm |
| 20 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 21 | Painting two coat (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 22 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two or more coats |
| 23 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts. |
| 24 | Painting one coats(excluding priming coat) on previously painted wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters sand papering and stopping including carriage of materials in all leads and lifts. With enamel paint |
| 25 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth In Cement Mortar 1:6 (1Cement:6 Sand).including carriage of materials within all leads and lifts |
| 26 | Disposal of moorum/ building rubbish/ malba. Similar unserviceable , dismantled or waste material by mechanical transport including loading, Transporting, unloading to approved Monicipal dumping ground for lead upto 10km. Foe lalleafts, complete as per dierection of Engineer- in Charge.Note:-Item to be applicable in urban area having directions for restricted hours movement/ plying of load carring motor vehicle of 3.5 cum. or More. |
| 27 | Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):- Anglo Indian Universal closet including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 28 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge:-110 mm X 90 mm. |
| 29 | Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 30 | Providing and fixing 600mm X 20mm size C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 31 | Providing and fixing 15mm dia C.P. brass bib tap with capstan head including C.P. flange and including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge ESS NX-102 |
| 32 | Providing and fixing 15mm nominal bore C.P. angle stop cock of ESS ESS catlogue No. C-204D or its equivalent of approved quality and colour with flange including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 33 | Providing and fixing charomium plated soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 34 | Providing and fixing 3 in 1 angular corner acraylic glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden/rawl plugs with C.P. brass screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 35 | Providing and fixing C.P.Towel ring complete with C.P. Brass brackets fixed to wooden plugs with C.P. screws including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge. :- 600mm x 20mmm size |
| 36 | Providing and fixing 610mm x510 mm bowl depth 200mm size Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 37 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :(i) Flat back wash basin of size 630x450 mm including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 38 | Providing and fixing C.P brass waste for wash basin or sink of 32 mm dia of approved brand including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 39 | Providing and fixing CP brass Sink mixer of approved quality with fittings complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 40 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 41 | Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 42 | Providing and fixing uplasticised PVC connection pipe with brass unions including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge. Make viking. 32 mm dia |
| 43 | Providing and fixing G.I pipes complete with G.I fittings and clamps , i/c cutting and making the good thewalls etc. internal work exposed on wall including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge 15 mm nominal bore |
| 44 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :15 mm nominal bore. including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 45 | Providing and fixing high pressure PVC (finolex) Type-A spigot and socket, waste and ventilating pipes ISI marked with collar and clamps including fixing with approved adhesive etc. complete. including carriage of materials within all leads and lifts :-110mm nominal size |
| 46 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc.complete. including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge. a)75mm dia. |
| 47 | Providing and fixing PVC Coller including fixing with approved adhesive etc.complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge.(i) 110 mm nominal size. |
| 48 | Providing and fixing PVC plain tee ISI marked including fixing with approved adhesive etc.complete.including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge a) 75mm dia. |
| 49 | Providing and fixing CP Brass single lever wall mixer 15mm nominal bore hole of approved quality and make including complete in all respect including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 50 | Providing and fixing curtain rods of 25 mm thick Ess Ess Make chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 51 | Providing and Fixing 1.50 mm thick pvc/rubber tiles flooring plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately)for payment including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender