Tender For maintenance of Sewerage (Rewinding Of 75 & 50 Hp Submersible Non Clog Motor And Repairing Of Sluice & Reflex Valve, Transformer, Cable, Starter And Other Allied Work At S.P.S. Sector-31), Noida. (For Two Years)
Tender Overview
Project Description
Tender for maintenance of Sewerage (Rewinding Of 75 & 50 Hp Submersible Non Clog Motor And Repairing Of Sluice & Reflex Valve, Transformer, Cable, Starter And Other Allied Work At S.P.S. Sector-31), Noida. (For Two Years)
BOQ
| Sl. No. | Item Description |
| 1 | Repairing/Rewinding of 50 HP kishore make Non Clog Submersible pump set as per following details. Motor Rewinding with P class insulation. |
| 2 | Winding thermostate 140 5 on/off auto cut |
| 3 | S/f Lower machanical seal |
| 4 | S/f Upper machanical seal |
| 5 | Cable protector |
| 6 | S/f O Ring Set |
| 7 | S/fD.I.Impeller |
| 8 | S/f Spring washer |
| 9 | S/f Spring washer |
| 10 | S/f Faster set |
| 11 | S/f Profile gasket |
| 12 | S/f Oil |
| 13 | Motor pump dismantling, assembling i/e labour charge. |
| 14 | Repairing/Rewinding of 75 HP kishore make Non Clog Submersible pump set as per following details. Motor Rewinding with F class insulation |
| 15 | Winding thermostate 140 + 5 on/off auto cut |
| 16 | S/f Upper machanical seal |
| 17 | S/f Lower machanical seal |
| 18 | Cable protector |
| 19 | S/f O Ring Set |
| 20 | S/f Oil |
| 21 | S/f Faster set |
| 22 | S/f Profile gasket |
| 23 | S/f D I Impeller |
| 24 | Nilos Ring |
| 25 | Spring washer |
| 26 | Pan Head screw |
| 27 | Motor pump dismantling, assembling i/c labour charge. |
| 28 | Supply and laying of 3 core standered aluminiumconductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. 70 sq. mm 3 core |
| 29 | 120 sq. mm 3 core |
| 30 | Repairing of Fully Automatic Starter 50 HP S/F of MNX 110 amp. Contractor L&T Make |
| 31 | S/F of 125 Amp. MCCB I& T make (D-Shine Micro processor) |
| 32 | S/F timer L&T make |
| 33 | S/F of VPD make Soft Hard |
| 34 | S/F of MPD make soft Hard |
| 35 | WLC/Seal monitor, Make Pump care/kishor |
| 36 | S/F of control tranformer make electra care/Pioneer |
| 37 | S/F Winding temp. relay minilec make |
| 38 | Auto transformer suitable for 50 HP induction motor |
| 39 | Repairing of Fully Automatic Starter 75 HP S/F of MNX 185 amp. Contractor L&T Make |
| 40 | S/F of 250 Amp. MCCB 1& T make |
| 41 | S/F timer L&T make |
| 42 | S/F of VPD make Soft Hard |
| 43 | S/F of MPD make Soft Hard |
| 44 | WLC/Seal monitor, Make Pump care/kishor |
| 45 | S/F of control tranformer make electra care/Pioneer |
| 46 | S/F Winding temp. relay minilec make |
| 47 | Auto transformer suitable for 75 HP induction motor |
| 48 | S/F of M.S. specials such as Tee, Bend, Collars, Tapers, Gap Pieces, including flage ends as required, painting, cutting, welding as per site requirement of MS pipe thickness etc. complete in all respect as per direction of E/I. |
| 49 | Rewinding & Repairing of Transformer Kirlosker make/ Equivalent make as per original winding 11/.433 K.Volt with super enameled copper wire as required gauge complete all respect as per direction of Engineer in charge. It is also include the dismantling /Refixing/Cartage from site to workshop /factory and vice versa . The old material will the property of contractor (Old material rate already deducted in AOR) 250 KVA |
| 50 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.400 sqmm 3½ core |
| 51 | 240 sqmm 3½ core |
| 52 | 120 sqmm 3½ core |
| 53 | Supply and Fixing of Chain Pulley 5 Tone Capacity with 3.00 Height of lift (Inder Make) |
| 54 | Supply and Fixing of Load Chain For Extra chain lift for 5 Tone Chain pulley. |
| 55 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. CAT- AAA |
| 56 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with xtended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA |
| 57 | Repairing of sluice valve with the change of spendle (I.e. S.S. non megnated) flapper adjusting nut & bolts & rod & welding machining of body for fitting the flapper properly complete as per direction of E/I. 300 mm dia Kirloskar make |
| 58 | 400 mm dia Kirloskar make |
| 59 | Repairing of reflex valve with the change of flapper sheet I/c new lever, rubber sheet, MS ring, S.S.pin shaft & shaft rubber etc. complete. 300 mm dia Kirloskar make |
| 60 | S/F of 11 KV TPMO Relco/Azad/Rama make 9 nos, insulator of Jai shree/BHEL/Rama/Rastriya make complete in all respects as per direction of ΕΛ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender