Tender For Development Of Swarn Jayanti Oxygen Park Near Vidhyadhar Nagar Jaipur
Tender Value
4.86 Crore
Estimated cost
Bid Submission
11 Sep 2026
19 days left
EMD
9.72 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Swarn Jayanti Oxygen Park Near Vidhyadhar Nagar Jaipur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | Technical Bid Corrigendum | Technical Bid | 11-Sep-2026 |
| 2 | 21-Aug-2026 | Date Extend Corrigendum | Date | 11-Sep-2026 |
| 3 | 21-Aug-2026 | Financial Bid corrigendum | Financial Bid | 11-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr and lift up to 1.5 Mtr : All kinds of soil |
| 2 | Earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr and lift up to 1.5 Mtr disposed soil to be levelled and neatly dressed : All kinds of soil |
| 3 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 4 | Add extra for foundation/trenches/drains for every additional lift of 1.5 Mtr or part thereof in All kinds of soil |
| 5 | Building Rubbish Stone metal (Grit and ballast etc.)For 1 Km |
| 6 | Building Rubbish Stone metal (Grit and ballast etc.)Add for each 1 Km beyond Ist Km (upto 5 Km.) |
| 7 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 8 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 9 | Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 10 | Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) : Deep groove pointing |
| 11 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing completeFor area of each slab from 2001 to 5000 Sq.Cm |
| 12 | Random rubble dry stone Kharanja under floor. |
| 13 | Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade.75 mm thick |
| 14 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.160 mm dia |
| 15 | Providing & Laying C.C. 1:3:6 (Stone Agreegate 20mm nominal size) all around PVC Pipe including 7.5 cm thick bed concerte [Width & Height = Dia of Pipe in CM+15CM] excluding cost of Pipe & Excavation of trenches etcPVC pipe 160 mm dia |
| 16 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes. |
| 17 | Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. Expended metal size 20-25 mm size 18SWG |
| 18 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 19 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 20 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Walls (any thickness) including attached pilasters, buttresses plinth and string course. |
| 21 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 22 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 23 | Extra if square,rectangular hollow tubelar sections are used or grill made by flats only |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 25 | Cement plaster in skirting and/dado 18 mm thick with cement mortar 1:3 (1 cement : 3 course sand) finished with a floating coat of neat cement including rounding of junctions with floor . |
| 26 | Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over roof on over roof slabs/terrace/balconies/parapet wall etc.with following method/specification: Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ Ltr of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 KG/Sqm on the surface of the interval of 3-4 hours. Undulation on the surface is repair before the waterproofing work. |
| 27 | Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 28 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 29 | Granular Sub-Base with Close Graded Material (Table:- 400-1) Plant Mix Method Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means.For Grading-I Material |
| 30 | Providing laying, spreading and compacting inverted choke by providing, laying, spreading and compacting screening B type/ coarse sand of specified grade in sub base course in uniform layer on a prepared surface with motor grader and compacting with power roller etc complete as per clause 404.3.2 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion complete. |
| 31 | Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc.Good soil of earth |
| 32 | Providing and fixing approved quality glass mosaic tiles of size 20x20 mm or approved size and shade in swimming pool, fountain, water body, cascade walls and underwater surfaces over 20 mm thick cement mortar bed in CM 1:4 and fixing with polymer modified adhesive complete, including raking and cleaning of joints, epoxy grouting in approved colour, cutting, edge finishing, curing, waterproofing treatment at joints, surface preparation and making complete watertight finish with all labour, materials, scaffolding, T&P, wastage, carriage, loading-unloading and incidental charges complete as per approved drawings and direction of Engineer-in-charge. |
| 33 | Design, engineering, supplying, installation, testing and commissioning of complete PLC/DMX based programmable musical fountain system for fountain basin of 18.00 metre diameter and 1.80 metre operating water depth complete with all electro-mechanical, hydraulic and automation components required for synchronized operation of water, light and music effects. The scope shall include providing and fixing heavy duty stainless steel (SS-304/SS-316) fountain nozzles comprising central vertical jet, arch jets, foam jets, mist jets and directional jets; submersible centrifugal fountain pumps of suitable discharge and head; stainless steel/GI/HDPE pressure pipeline network with headers, valves, non-return valves, strainers, flanges, reducers, clamps and fittings complete. The item shall also include underwater IP-68 RGB DMX controlled LED fountain lights with SS housing, programmable PLC/DMX automation controller, synchronizing software, control panel with MCCB/MCB/VFD/ starters/timers/contactors, synchronised audio/music system, power cabling, FRLS copper control wiring, waterproof junction boxes, cable glands, earthing system, supports, anchor fasteners and all accessories complete. The work includes hydraulic balancing, nozzle alignment, fabrication and erection of supports, fixing of pumps and nozzles, laying and jointing of pipelines, electrical wiring and termination, waterproof connections, testing of pumps and lighting system, programming of fountain sequences, synchronization of water patterns with light and music effects, trial operation and final commissioning complete. The item also includes all civil minor works required for installation, cutting/chasing, grouting, sealing, scaffolding, T&P, loading-unloading, transportation, consumables, taxes, contractor’s overheads and profit complete as per approved shop drawings, technical specifications and direction of Engineer-in-charge. |
| 34 | Providing and fixing 16 mm dia J type anchor/foundation bolts having 600 mm embedment inside concrete foundation and 150 mm projection above finished foundation level, including bend/hook anchorage, threading, positioning with template, alignment true to line and level, complete with nuts, lock nuts and washers, fixing in foundation concrete, including welding/support arrangement, anti-rust coating, labour, tools & plants and all incidental works complete in all respects as per approved drawings, specifications and direction of Engineer-in-charge. |
| 35 | Providing and fixing approved quality machine cut Bijoliya stone kerb of size 300 mm height and 150 mm thickness, having one side moulded/chamfered decorative profile as per approved design and MoRTH pattern, including cutting, carving, dressing, edge finishing, laying and fixing true to line, level, curve and gradient in cement mortar 1:4 over prepared bed, including proper jointing, pointing with matching cement slurry, curing, loading, unloading, carriage, labour, tools & plants, wastage and all incidental works complete in all respects as per approved drawing, specifications and direction of Engineer-in-charge. |
| 36 | Providing and laying stepping stone pathway over well prepared and compacted subgrade comprising 100 mm thick compacted aggregate/gravel bed of approved graded stone aggregate laid to required slope, level and alignment complete. The work shall include providing and fixing circular Bijoliya sandstone stepping stones of 600 mm diameter and 50–75 mm thickness or approved size and thickness, placed in single line pattern at required spacing as per approved landscape drawing/DPR. The item includes dressing of subgrade, filling with stone aggregate, watering, compaction, laying and leveling of stepping stones, edge adjustment, joint filling with fine grit/stone dust and making complete pathway finish including all labour, materials, T&P, carriage, loading-unloading, wastage and incidental charges complete as per specifications and direction of Engineer-in-charge. |
| 37 | Providing and laying decorative pathway flooring using random shaped Bijoliya/Kota/natural sandstone pieces of 20–25 mm thickness fixed in CM 1:4 over 20 mm thick cement mortar bed on prepared surface complete as per approved DPR, detailed drawings and direction of Engineer-in-charge. The work shall include hand cutting/dressing of stones, laying in approved random irregular pattern, maintaining proper line, level and slope, filling intermediate gaps with selected natural river pebbles embedded in cement mortar, finishing joints with matching cement slurry, curing, cleaning and providing complete decorative landscape flooring finish as per approved design, pattern and specifications. The item includes all materials, cement mortar bedding, pebble inlay work, cutting, dressing, labour, T&P, curing, carriage, loading-unloading, wastage and all incidental charges complete in all respect as per approved DPR and direction of Engineer-in-charge. |
| 38 | Providing and laying natural random polygonal Bijoliya/Kota/Sandstone pieces of average 75 mm thickness over prepared and levelled sand bed complete as per approved DPR, pattern and direction of Engineer-in-charge. The work shall include preparation of subgrade, providing and spreading 40 mm thick coarse sand bedding layer, hand dressing and laying of random shaped stone pieces in approved irregular/polygonal pattern, maintaining proper line, level, slope and alignment, filling joints with fine sand/stone grit, compacting, watering, finishing and cleaning complete to required architectural landscape appearance. The item includes all materials, sand bedding, stone cutting/dressing, labour, T&P, carriage, loading-unloading, wastage and all incidental charges complete in all respect as per approved drawings, DPR and direction of Engineer-in-charge. |
| 39 | Providing, supplying, installing and testing of 1.5 inch Rain Gun Sprinkler (Model HT-42G, Pelican make or equivalent approved) including nozzle set, complete with all accessories such as riser pipe, fittings, clamps, nuts & bolts, etc., required for proper functioning, connected to HDPE/PVC pipeline system, including all labour, T&P, carriage, loading-unloading and complete as per direction of Engineer-in-charge. |
| 40 | Providing, supplying, installing and testing of HDPE pipe fittings for 75-90 mm dia line including sprinkler saddle (take-off), coupler, tee, elbow, reducer, Valves, end cap etc., suitable for HDPE pipe (PE-80/PE-100), including drilling in pipe, fixing saddle clamp with rubber gasket, tightening with GI nuts & bolts, jointing with compression fittings, complete in all respect, as per site requirement, including labour, T&P, carriage, loading-unloading as per direction of Engineer-in-charge. |
| 41 | Providing, supplying, installing and testing of Quick Release Couplings (QRC) of various sizes (male & female type) made of aluminium/brass/HDPE, suitable for HDPE/GI pipeline, including rubber sealing ring, locking arrangement, complete with all accessories, jointing, testing, labour, T&P, carriage, loading-unloading, etc., as per direction of Engineer-in-charge. |
| 42 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work200 mm Nominal bore of pipe |
| 43 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985.200mm-do- |
| 44 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size: 250mm dia |
| 45 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
| 46 | Installation of submersible motor pump set in Tube-well/open well complete ( labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose. |
| 47 | Providing & Laying of Polypropylene rope Confirming to IS:5175 for submersible pump of following sizes. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .20mm (suitable for 90 mm OD pipe) |
| 48 | Providing & Fixing of HDPE pipe Confirming to IS:4984:2021 for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .for vertical installation90 mm OD 10 kg / cm2 |
| 49 | Providing & Fixing of HDPE pipe Confirming to IS:4984:2021 for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .for Horizontal installation75 mm OD 4 kg/ cm2 |
| 50 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR6.0 Sqmm 3 core flat / Round |
| 51 | SITC of Radial / mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034 : 2018 and IS: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The Job includes labour part of lowering of riser pipe G.I./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .150 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively.7.5 HP, 3-Ø, (76 - 96)Mtr, (285-180) LPM |
| 52 | SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . For Three phase Submersible / Mono block pump 7.5 HP to 10.0 HP ( Star/Delta starter) |
| 53 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc40mm dia nominal bore 'B' Class |
| 54 | P & F Gun-metal Non-return Valve or Check Valve (IS : 778 Make) of approved make, superior quality:40mm nominal bore.Horizontal |
| 55 | Supply of PVC hose pipe of different sizes at store including transportation etc. complete.38 mm dia |
| 56 | Construction of tube well from ground level & up to 100 mtr depth to accommodate housing and assembly pipe of following sizes in all type of alluvium strata unconsolidated formation such as pebbles, boulders etc. by percussion/rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications, with gravel as per IS:4097-1967 and it's packing as per IS: 2800 (Part I & II) 1979 as amended up to date (the work includes the cost of gravel & it's primary packing and packing during development, lowering of housing & strainer assembly pipes with supply and wrapping of coir-rope, wherever necessary for arresting fine sand particles and development work, but excluding the cost of housing and strainer pipe assembly). The work would be completed after obtaining sand free water.Nominal bore 250 mm dia. |
| 57 | Providing, supplying, installing and testing of 1.5 inch Rain Gun Sprinkler (Model HT-42G, Pelican make or equivalent approved) including nozzle set, complete with all accessories such as riser pipe, fittings, clamps, nuts & bolts, etc., required for proper functioning, connected to HDPE/PVC pipeline system, including all labour, T&P, carriage, loading-unloading and complete as per direction of Engineer-in-charge. |
| 58 | Providing, supplying, installing and testing of HDPE pipe fittings for 75-90 mm dia line including sprinkler saddle (take-off), coupler, tee, elbow, reducer, Valves, end cap etc., suitable for HDPE pipe (PE-80/PE-100), including drilling in pipe, fixing saddle clamp with rubber gasket, tightening with GI nuts & bolts, jointing with compression fittings, complete in all respect, as per site requirement, including labour, T&P, carriage, loading-unloading as per direction of Engineer-in-charge. |
| 59 | Providing, supplying, installing and testing of Quick Release Couplings (QRC) of various sizes (male & female type) made of aluminium/brass/HDPE, suitable for HDPE/GI pipeline, including rubber sealing ring, locking arrangement, complete with all accessories, jointing, testing, labour, T&P, carriage, loading-unloading, etc., as per direction of Engineer-in-charge. |
| 60 | Building Rubbish Stone metal (Grit and ballast etc.)For 5 Km. |
| 61 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 Mtrs lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. |
| 62 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 Mtrs lead as per direction of Engineer-in-charge.1: 4: 8 or leaner mix. |
| 63 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 Mtrs lead as per direction of Engineer-in-charge. |
| 64 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge |
| 65 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 Mtrs lead as per direction of Engineer-in-charge.In cement mortar. |
| 66 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 Mtrs lead as per direction of Engineer-in-charge: In cement mortar. |
| 67 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 Mtrs lead as per direction of Engineer-in-charge:dry masonry |
| 68 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50Mtrs lead. |
| 69 | Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead |
| 70 | Dismantling roofing including ridges, hips, valleys and rafters etc. and stacking the within 50 meter lead of:G.I. Sheet. |
| 71 | Dismantling GI pipes (external work) including excavation and refilling trenches after taking out the pipes and including stacking of pipes within 50 meter lead:Above 40mm nominal bore. |
| 72 | Dismantling CI pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into block, including stacking of pipes lead at site within 50 meter, of dia:Up to 150mm dia. |
| 73 | Supply of JCB (excavator cum loader) Type 3D on hire including POL & driver at different sites as Directed by Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 19 days
Sep 11, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 19 days
Sep 11, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 19 daysSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender