Tender For Special Repair To Bldg No T-191(Pro Unit), T-93(Store Room) And T-181(16 Guard) Of 55 (I) Mech Bde At Mil Stn Beas Under Ge Kapurthala
Tender Value
37.60 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
14 days left
EMD
75200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No T-191(Pro Unit), T-93(Store Room) And T-181(16 Guard) Of 55 (I) Mech Bde At Mil Stn Beas Under Ge Kapurthala
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Special repair to Bldg No T-191(Pro unit), T-93(Store room) and T-181(16 Guard) of 55 (I) Mech Bde at Mil Stn Beas under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges, complete all as specified and directed. |
| 3 | Dismantling framed trusses of span not exceeding 10m, complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 5 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thicknness, including cover fillets, complete all as specified and directed. |
| 6 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 7 | S&F of pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 8 | Erection and fixing only steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. Complete all as specified and directed. |
| 9 | Erection and fixing only steel tubular work as in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. Complete all as specified and directed. |
| 10 | S&F of mild steel work in tubular trusses including spcial shaped washer, vertical Post, including bracket, tee, distance pieces,cleat etc, complete using ERW or induction butt welded tubes, conforming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 11 | M&L for steel tubular work as in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 12 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 13 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc; laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 14 | Demolition of brickwork built in mud mortar including pillars etc; complete all as specified and directed. |
| 15 | M&L for brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 complete all as specified and directed. |
| 16 | M&L for RCC 1:11/2:3 , type A-0, using 12.5 mm nominal size graded crushed stone aggregate as in chajjas, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including 5mm thick rendering in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 17 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc; complete all as specified and directed. |
| 18 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and fair, complete all as specified and directed. |
| 19 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and fair, complete all as specified and directed. |
| 20 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 21 | M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 22 | M&L for preparation of newly plastered surface of walls and applying two coats of acrylic emulsion over a coat of alkali resistant primer complete all as specified and directed. |
| 23 | M&L for applying one coat of wall care putty not more than 2mm thick complete all as specified and directed. |
| 24 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, M&L for |
| 25 | M&L for plain cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in copings, benching, haunching, bond stones bed and the like including use of necessary form work complete all as specified and directed. |
| 26 | M&L for providing reinforced cement concrete cast in situ Type B-1, 1:2:4 ( 20 mm graded stone aggregate) as in lintels upto 1.5m clear span including necessary formwork complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately) |
| 27 | M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed. |
| 28 | M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base, plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed. |
| 30 | M&L for non skid ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 31 | M&L for non skid ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and directed. |
| 32 | M&L for glazed coloured ceramic tile 450 x 300 x 7mm thick (coloured) on vertical surfaces such as skirting, dados etc; set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and directed. |
| 33 | M&L for 18mm thick zed black granite machine cut in any position bull nosed on front face, laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 34 | M&L for machine cut kota stone slab flooring 16-18 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified. |
| 35 | M&L for machine cut kota stone slab flooring 16-18 mm thick over and incl 10mm thick rendering in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in riser of steps/ pillars/ skirting/ dado including rubbing and polishing complete all as specified and directed. |
| 36 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 37 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in slab of septic tank, soak well, etc supported on walls, beams & columns in floors, roofs, landings, balconies, canopies, deckslabs & in shelves & the like etc; complete all as specified and directed. |
| 38 | M&L for cement concrete type D2, 1:4:8(40mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 39 | S&F of for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 40 | - ditto - all as per item No. 38 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders',complete all as specified and directed. |
| 41 | Use and waste of formwork with fair finished flat concrete surfaces such as soffits of suspended slab, such as roof slabs, floor slabs, landings & similar work, n.exc 200mm thick, horizontal or sloping complete all as specified and directed. |
| 42 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of area n.exc 1.5 Sqm each and removing from site complete all as specified and directed. |
| 43 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of area exceeding 1.5 sqm and not exceeding 4.00 sqm each and removing from site complete all as specified and directed. |
| 44 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension ie; depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 45 | S&F of factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing , complete all as specified and directed. |
| 46 | S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrappd on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly complete all as per drawing and all as specified and directed. |
| 47 | S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification, complete all as specified and directed. |
| 48 | S&F of factory made solid panel PVC door shutter 30 mm thick both side prelaminated with wood grain/coloured (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of same colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 49 | S&F of steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per drg No CEJZ/TD-7/07 sheet 1/3 to 3/3. Note:- Glass and painting shall be measured and paid separately under appropriate item etc. complete all as specified and directed. |
| 50 | S&F of steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises guazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per drg No CEJZ/TD-7/07 sheet 1/3 to 3/3. Note:- wiremesh and painting shall be measured and paid separately under appropriate item etc; complete all as specified and directed. |
| 51 | M&L for ventilators fixed type of 50x20mm hollow pipe of 1mm thick with glazing bars etc; complete all as specified and directed. |
| 52 | M&L for framed work as in doors or gates and chowkhats of angle or other section with gusset plates, rails, braces, etc; complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and directed. |
| 53 | S&F of mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed. |
| 54 | S&F of 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified. |
| 55 | S&F of aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified. |
| 56 | S&F of mild steel barrel tower bolt 200mm long, stove enamelled black with bright bolt and fixed complete all as specified. |
| 57 | S&F of MS pressed handle of size 150mm long oval size stove enamelled black complete all as specified. |
| 58 | S&F of butt hinges 100mm size, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed. |
| 59 | S&F of 20 mm bore stainless steel curtain rod with 1 mm thick wall thickness and each length not more than 1.5 Metre including a pair of brackets and knobs with each length/ piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed. |
| 60 | M&L for galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified. |
| 61 | M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint complete all as specified and directed. |
| 62 | M&L for 03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified. |
| 63 | M&L for ceiling using 9mm thick gypsum based ceiling tiles with wheather resistance face on back side and vinyl finish including framework on the front fixed in 24mm GI armstrong frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with minimum thickness of 120 gms per/sqm passed through 500 hrs test and hanging the same with existing roof members such as rafters, pulins or other wooden members particularly provided for hanging pupose using 8mm dia mild steel bar of required length fixed with nut bolt of 50mm long and 10mm dia of neck with washer flat iron 50x6mm thick clamps etc to steel members, complete all as specified and directed. |
| 64 | S&F of powder coated anodised aluminium frame (thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc; complete all as specified and directed. |
| 65 | S&F of powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 Nos) suitable handle (1 No.) complete all as specified and directed. |
| 66 | S&F of powder coated anodised aluminium fly proof window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 Nos) suitable handle (1 No.) complete all as specified and directed. |
| 67 | S&F of aluminium alloy wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed. |
| 68 | M&L for 5.50mm thick sheet glass but exc 0.5sq.m in each , ordinary quality and glazing with beads fixed with metal panel pins with solar control dil 25micron reflective type sicked to glass panes as per instruction of manufacturers complete all as specified and directed. |
| 69 | S&F of,aluminium (extruded section) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed. |
| 70 | M&L for floor door stopper 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and directed. |
| 71 | M&L for 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed. |
| 72 | M&L for sand under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 73 | M&L for machine pressed precast concrete interlocking paver block, 80mm thick, any shape and size, confirming to IS-15658-2006, M-40 Grade, with grey cement and no pigment complete all as specified and directed. |
| 74 | Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc, making good distrubed surfaces of wall, floar, ceiling etc complete all as directed. |
| 75 | M&L for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit ( Modular Fitting) with all accessories including 1.5 sqmm copper multistrand conductor (FRLS ) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel metal flush mounting box for mounting of fittings like switch , socket and fan regulator and cover plat of suitable modules capacity and make of swich socket complete all as specified and directed. |
| 76 | One light point controlled by one, one way switch complete all as specified and directed. |
| 77 | One fan point controlled by one, one way switch complete all as specified and directed. |
| 78 | One socket outlet 3 Pin, 5 Amp on independent board complete all as specified and directed. |
| 79 | One socket outlet 3 Pin, 5 Amp on same board complete all as specified and directed. |
| 80 | - ditto - all as per item No 74 here in before but 2.5 Sqmm PVC insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board complete all as specified and directed. |
| 81 | - ditto - all as per item No 74 here in before but 4.0 Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board complete all as specified and directed. |
| 82 | M&L for ceiling rose, surface bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) complete all as specified and directed |
| 83 | S&F of PVC/Polycarbonate lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings type with back plate suitable for batten fittingscomplete all as specified and as directed. |
| 84 | S&F of modular switch 6 Amp 250 V AC one way one module complete all as specified and directed. |
| 85 | S&F of modular switch 16 Amp 250 V AC one way with indicator one module complete all as specified and directed. |
| 86 | S&F of modular socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 87 | S&F of modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 88 | S&F in repair modular fan regulator step type, 120W - 2 module complete all as specified and directed. |
| 89 | Taking doun old unsv sub main and M&L for sub main wiring with five runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 10.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size not less thgan 25 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 10.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note:- Two run of 10.00 Sqmm cable one run of 6.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.) |
| 90 | Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. |
| 91 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 92 | Supply and fixing LED security light fitting 35 watt Pressure die cast aluminium housing, heat resistant toughened glass with frame IP 66 Protection cat Part No LSTN-30-CDL complete fitting including 1.5 mtr long 40/50 mm (Suitable size for fixing of LED light fitting) bore GI pipe mounting bracket/Clamp made to shape for fixing on pole with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers complete all as specified and directed. |
| 93 | S&F in repair sheet metal enclosure for MCB DB double door Single pole & Neutral 8 way with 200 Amps rated bus bar complete all as specified and directed. |
| 94 | S&F in repair sheet metal enclosure for MCB DB double door Triple pole and Neutral 4 way with 200 Amps rated bus bar complete all as specified and directed. |
| 95 | S&F in repair sheet metal enclosure for MCB DB double door Triple pole and Neutral 6 way with 200 Amps rated bus bar complete all as specified and directed. |
| 96 | S&F in repair SP 6 To 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified. |
| 97 | - do- but SPN 40 to 63 AMP complete all as specified and directed. |
| 98 | - do- but TPN 40 to 100 AMP complete all as specified and directed. |
| 99 | S&F of ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with bushless direct current motor ( BLDC) omplete all as specified and directed. |
| 100 | S&F of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm omplete all as specified and directed. |
| 101 | Supplying, Laying, jointing and testing XLPE PVC insulated & PVC sheathed LT cable, 1100 volts grade (heavy duty )with stranded aluminium conductor, cross sectional area 35 Sqmm 3.5 core fixed along the poles or passing through pipes or laid under floors or through walls complete all as specified and directed.Note:- Earthwork, sand cushioning, brick protection and GI pipe to be measured and paid for separately under respective items. |
| 102 | Supplying, Laying, jointing and testing XLPE PVC insulated & PVC sheathed LT cable, 1100 volts grade (heavy duty )with stranded aluminium conductor, cross sectional area 50 Sqmm 3.5 core fixed along the poles or passing through pipes or laid under floors or through walls omplete all as specified and directed.Note:- Earthwork, sand cushioning, brick protection and GI pipe to be measured and paid for separately under respective items. |
| 103 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc; omplete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender