Tender For Estimate For Relining Of Water Course Of O/L Rd 17818/Tl Of Minor No 6 Of Bhawanigarh Disty. By Laying Of Up Gradation Pipeline At Vill. Roshanwala,Disit.Sangrur
Tender Value
80.99 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
3 days left
EMD
1.62 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sangrur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Relining Of Water Course Of O/L Rd 17818/Tl Of Minor No 6 Of Bhawanigarh Disty. By Laying Of Up Gradation Pipeline At Vill. Roshanwala,Disit.Sangrur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 2 | First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth |
| 3 | PLASTERING & POINTING 10mm thick Cement Plaster 1:4 on side walls |
| 4 | 10mm thick cement plaster 1 : 4 on bed and top |
| 5 | Cement 1:2:4 concrete With stone ballast or shingle mixing by mechanical means |
| 6 | Cement 1:4:8 concrete With stone 40mm gauge aggregate mixing by mechanical means |
| 7 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 8 | (1) Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturers permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stoneaggragate) complete as per design. |
| 9 | (46) Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marekd as per IS code IS 458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc. R.C.C. Pipe NP -4 400mm i/d pipe |
| 10 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 11 | Dismantling pucca grouted pitching |
| 12 | Lowering, jointing of RCC NP-2 plain end pipes 400 mm dia laying same to correct gradient and alignment and jointing ends and fixing collars with cement mortar 1:2 as per IS 458:2003 in all depths complete in all respect. |
| 13 | Lowering, jointing of RCC NP-2 plain end pipes 150 mm dia laying same to correct gradient and alignment and jointing ends and fixing collars with cement mortar 1:2 as per IS 458:2003 in all depths complete in all respect |
| 14 | Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators) |
| 15 | Providing & Fixing of Steel Shutter Gate Assembly in Main Pipeline complete in all respect |
| 16 | Excavation by mechanical means(JCB or hydraulic excavator) in trenches for pipeline with straight or open cutting in street or open area including dressing sides levelling of bed of trenches to correct grade cutting joints holes, refilling consolidation including the cost of diversion for traffic crossing over trenches for access to the houses watching fencing etc and removal of surplus soil outside/inside the town involving lead upto 15mtr complete in all respects |
| 17 | RCC 1:2:4 hand mixed |
| 18 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.Cworks, where not including in the complete rate of RCC including bending and binding placing inposition complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender