Tender For Repairs, Recanning, Painting And Polishing To All Types Of Chairs, Tables , Sofas, Bed/Charpoy And Other Furnitures At Kamat Bay, Nofra, Vajrakosh And Nad Locations Of Naval Base Karwar.
Tender Value
90 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
24 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs, Recanning, Painting And Polishing To All Types Of Chairs, Tables , Sofas, Bed/Charpoy And Other Furnitures At Kamat Bay, Nofra, Vajrakosh And Nad Locations Of Naval Base Karwar.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for supply & fixing of 1st class teakwood front leg of Chair writing MEC-181,C3/MEC/SP/181/MO/11, C3/MEC/SP/181/SO/8 free from cracks and knots including removal of old unsv front leg and tightening of frame work all as shown as per drawing all as specified and directed by Engr-in-charge- |
| 2 | -ditto-all as per item No. 1.00 one above but for Rear leg |
| 3 | -ditto-all as per item No. 1.00 one above but for Side rail seat. |
| 4 | -ditto-all as per item No. 1.00 one above but for Bottom stiffner (side). |
| 5 | -ditto-all as per item No. 1.00 one above but for Arms rest |
| 6 | M&L removing the unserviceable pvc shoes of chair writing and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 7 | Preparation of old decorated / new replaced parts /surface of chair writting smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 8 | M&L for supply & fixing of 1st class teakwood Front leg of Chair Writing FD-280 free from cracks and knots including removal of old unsv Front leg and tightening of frame work all as shown as per drawing all as specified and directed by Engr-in-charge- |
| 9 | -ditto-all as per item No. 2.00 one above but for Rear leg |
| 10 | -ditto-all as per item No. 2.00 one above but for Side rail seat. |
| 11 | -ditto-all as per item No. 2.00 one above but for Bottom stiffner (side). |
| 12 | -ditto-all as per item No. 2.00 one above but for Arms rest |
| 13 | M&L for removing the unserviceable pvc shoes of chair writing and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 14 | Preparation of old decorated / new replaced parts /surface of chair writing smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 15 | M&L for removing Old unserviceable Tapestry cloth and PVC Lipping of Chair writing(Chair padded with arms) FD/E6/MAP/12,MEC 2941,TP of back rest and seat and replacing the same by S&F of new PVC Lipping and tapestry cloth of superior quality not less than Rs 290/- per meter as approved. |
| 16 | M&L for removing the unserviceable Arms rest and replacing the same by S&F of new arms rest made of black integral skin polyurethane with MS insert and with nut and bolts of trade pattern as approved. |
| 17 | M&L for painting of two coat of black paint (after removing rust/paint) to chair writing all as specified and shown on drgs and directed by Engineer-in-Charge. |
| 18 | M&L for supply & fixing of 1st class teakwood Front leg of Chair dining MEC 178, MEC 179 free from cracks and knots including removal of old unsv Front leg and tightening of frame work all as shown as per drawing all as specified and directed by Engr-in-charge- |
| 19 | -ditto-all as per item No. 4.00 one above but for Rear leg |
| 20 | M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 21 | M&L for removing the unserviceable/broken seat of chair dinning and replacing the same by S&F of new made out of 12mm thick plywood BWP grade fixed with 1mm thick lamination finish including tightening of the frame work all shown as per drawing. |
| 22 | Preparation of old decorated / new replaced parts /surface of chair dining smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 23 | M&L for supply & fixing of 1st class teakwood Front leg of Chair dinning Type B C3/MEC/SP/201/MO/8 free from cracks and knots including removal of old unsv Front leg and tightening of frame work all as shown as per drawing all as specified and directed by Engr-in-charge- |
| 24 | -ditto-all as per item No. 5.00 one above but for Rear leg |
| 25 | -ditto-all as per item No. 5.00 one above but for Front rails. |
| 26 | -ditto-all as per item No. 5.00 one above but for Side rails. |
| 27 | -ditto-all as per item No. 5.00 one above but for Rear rails. |
| 28 | -ditto-all as per item No. 5.00 one above but for Bottom stiffener. |
| 29 | M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 30 | M&L for removing the unserviceable seat of chair dinning and replacing the same by S&F New Seat with one side teak face (two piece of 6mm thick Plywood and One peice of Teak face Veener. Paste these piece with adhesive and nails in curved shape including tighting the frame all work as per drg and as directed by Engr-in-charge). |
| 31 | Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 32 | M&L for supply & fixing of 1st class teakwood Front leg of Chair dinning FD 279 free from cracks and knots including removal of old unsv front leg and tightening of frame work all as shown as per drawing all as specified and directed by Engr-in-charge- |
| 33 | -ditto-all as per item No. 6.00 one above but for Rear leg |
| 34 | -ditto-all as per item No. 6.00 one above but for Side rails |
| 35 | -ditto-all as per item No. 6.00 one above but for Front rails. |
| 36 | -ditto-all as per item No. 6.00 one above but for Rear rails. |
| 37 | -ditto-all as per item No. 6.00 one above but for Bottom stiffener. |
| 38 | -ditto-all as per item No. 6.00 one above but for Rest stiffener. |
| 39 | M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 40 | Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 41 | M&L for removing the unserviceable pvc shoes of Chair dinning with PVC Seat FD/MAP-II/05 and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 42 | M&L for removing the unserviceable/broken PVC seat by supply and fixing new PVC seat in one piece and all as shown on drawing and as per sample approved. |
| 43 | Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 44 | M&L for removing the unserviceable pvc shoes of Chair dinning high back with cushioned C3/MEC/SP/201/193 and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 45 | M&L for removing old unserviceable seat and back cushion of chair dinning high back and replacing the same by S&F of new 50 mm thick cushion 32 density duly upholstered / covered with new tapestry cloth all as shown on drawing and as specified and directed. |
| 46 | Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 47 | M&L for supply & fixing of 1st class teakwood Front leg of Chair dinning with cushion FD/E6/MAP/10R, FD/E6/MAP/04 free from cracks and knots including removal of old unsv front leg and tightening of frame work all as shown as per drawing all as specified and directed by Engr-in-charge- |
| 48 | -ditto-all as per item No. 9.00 one above but for Rear leg |
| 49 | -ditto-all as per item No. 9.00 one above but for Side rails |
| 50 | -ditto-all as per item No. 9.00 one above but for Bottom stiffener. |
| 51 | M&L for removing the unserviceable cushion with seat and S & F new seat top of chair dinning with 75mm thick 32 density foam covered with tapestry cloth not less than Rs 290/- per meter as approved on seat of 12 mm commercial plywood BWP grade including tightening of frame work all as shown on drawing. |
| 52 | M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 53 | Preparation of old decorated / new replaced parts /surface of wooden furniture smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 54 | M&L for supply & fixing of 1st class teakwood front leg of Chair Easy FD 1108 free from cracks and knots including removal of old unsv front leg and tightening of frame work all as shown as per drawing all as specified and directed by Engr-in-charge- |
| 55 | -ditto-all as per item No. 10.00 one above but for Rear leg |
| 56 | -ditto-all as per item No. 10.00 one above but for Side seat rails. |
| 57 | -ditto-all as per item No. 10.00 one above but for Rear seat rails. |
| 58 | -ditto-all as per item No. 10.00 one above but for Front seat rails. |
| 59 | -ditto-all as per item No. 10.00 one above but for Arms rest. |
| 60 | M&L for removing the unserviceable pvc shoes of chair easy and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 61 | Preparation of old decorated / new replaced parts /surface of chair easy smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 62 | M&L for supply & fixing of 1st class teakwood Front leg of Chair Easy FD 229 C3/MEC/SP/209/MO/9, C3/MEC/SP/209/SO/5, MEC 2915 free from cracks and knots including removal of old unsv front leg and tightening of frame work all as shown as per drawing all as specified and directed by Engr-in-charge- |
| 63 | -ditto-all as per item No. 11.00 one above but for Rear leg |
| 64 | -ditto-all as per item No. 11.00 one above but for Side seat rails. |
| 65 | -ditto-all as per item No. 11.00 one above but for Rear seat rails. |
| 66 | -ditto-all as per item No. 11.00 one above but for Front seat rails. |
| 67 | -ditto-all as per item No. 11.00 one above but for Arms rest. |
| 68 | M&L for removing the unserviceable pvc shoes of chair easy and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 69 | Preparation of old decorated / new replaced parts /surface of chair easy smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 70 | M & L for removing old unsv Gas Lifter/hydraulic assembly by S & F new gas lift/hydraulic assy including tighting the frame work etc. of Chair revolving cushioned seat & back MEC 2942 MEC 2941 FD/E6/MAP/01, TP Model No CH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T, PCH-7042/46A/46T/46R/03 R PCH 9200/01R. |
| 71 | M & L for removing old unsv Poly Urathene Armrest by S & F new arm rest of superior quality including nut and bolts. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R. |
| 72 | M & L for removing unsv wheel base by S & F new wheel base including tighting the frame work. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R |
| 73 | M & L for removing unsv castor wheel by S & F new castor wheel of superior quality including tighting the frame work. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R |
| 74 | M&L for removing old seat and back cover cloth and provide new tapestry cloth not less then Rs 290/- per mtr for seat and back of superior quality as specified and directed Drg No PCH-7000/1/2/3,PCH-9101R, MEC-2941. |
| 75 | M&L for removing old unserviceable cane/newar from Chair Varandah FD 256 and recanning with approved quality of cane plastic 4mm/5mm half round wide in godrej pattern as specified and directed by Engineer in Charge. |
| 76 | M&L for removing the unserviceable rubber shoe by S&F new Hard rubber shoe of superior quality as shown on drawing. |
| 77 | Preparation of steel surfaces of chair varandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and appyling two coat of synthetic enamel paint (white) complete all as specified. |
| 78 | M & L for removing PVC seat and back of Chair Varandah FD/E6/MAP/06, FD/MAP II/15 by providing new 4mm thick seat & back made out of PVC moulded alongwith 4 x 10mm ribs of approved make provided at all around the outer edge & around the grooves as shown on drawing. |
| 79 | M&L for removing the unserviceable rubber shoe by S&F new Hard rubber shoe of superior quality as shown on drawing. |
| 80 | Preparation of steel surfaces of chair varandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and appyling two coat of synthetic enamel painting (white) complete all as specified. |
| 81 | Preparation of steel surfaces of Chair Varandah FD/E6/MAP/11 by scrapping, rubbing, cleaning including making good of bents spat re-rusting and appyling two coat of synthetic enamel painting (black) complete all as specified. |
| 82 | M&L removing the unserviceable/broken rubber shoe by providing new one of superior quality as shown on drawing. |
| 83 | Chair Writing/ Chair dinning/ Chair Easy MEC 181, C3/MEC/SP/181/MO/11, C3/MEC/SP/181/SO/8, FD 280, FD 279, FD 1108, FD 229, C3/MEC/SP/209/MO/9, C3/MEC/SP/209/SO/5, MEC 2915 M&L for removing old unserviceable cane of chair recanning with approved quality of cane plastic 2mm/3mm half round wide and Border with 4mm/5mm half round wide in godrej pattern as specified and directed by Engineer in Charge. |
| 84 | M&L for removing existing old unserviceable Seat and Back of Chair Steel Tubular with Arm (FD-75) and Welding MS FIat 11\\" x 2\\" and 4mm thick for seat (02 Nos) and Welding MS FIat 8\\" x 2\\" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge.(a) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of paint (colour or shades approved by Engr-in-Charge) (b) S&F Plywood 12mm thick size 18\\" x 17\\" fixed on welded MS Flat (Iron) with the help of suitable screw for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat coverd with tapestry cloth and black cloth linen at bottom side with the help of suitable stappler pin and upholstery work . (as per sample kept in BSO Yard)(c) S&F Plywood 12mm thick size 18\\" x 15½\\" fixed on welded MS Flat (Iron) with the help of suitable screw for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back coverd fully with tapestry cloth with the help of suitable stappler pin and upholstery work .Note : (i) Fixing of both Seat and Back including painting of chair will be considered as one unit. (ii). Tapestry cloth (Not less than 290/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge |
| 85 | Taking down old unserviceable hand rest and S & F new hand rest made of PVC in Black colour as per sample. |
| 86 | Taking down old unserviceable PVC caps and S&F new caps as per drg. |
| 87 | Taking down old unserviceable shoe and S & F new suitable PVC/hard rubber shoes as directed by Engr in Charge. |
| 88 | M&L for removing existing old unserviceable Seat and Back of Chair CB Steel without Arm (FD-75) and Welding MS FIat 11\\" x 2\\" and 4mm thick for seat (02 Nos) and Welding MS FIat 8\\" x 2\\" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge.(a) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of paint (colour or shades approved by Engr-in-Charge) (b) S&F Plywood 12mm thick fixed on welded MS Flat (Iron) with the help of suitable screws for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat coverd with tepestry cloth and black cloth linen at bottom side with the help of suitable stappler pin and upholstery work . (as per sample kept in BSO Yard)(c) S&F Plywood 12mm thick fixed on welded MS Flat (Iron) with the help of suitable screws for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back coverd fully with tepestry cloth with the help of suitable stappler pin and upholstery work .Note : (i) Fixing of both Seat and Back including painting of chair will be considered as one unit. (ii) Tapestry cloth (Not less than 290/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge |
| 89 | Taking down old unserviceable PVC caps and S&F new caps as per drg. |
| 90 | Taking down old unserviceable shoe and S & F new suitable PVC/hard rubber shoes as directed by Engr in Charge. |
| 91 | M & L for removing unsv top of Table dinning 8 Persons C3/MEC/SP/201/MO/25 by S & F new table top in one piece made out of 18mm thick plywood BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including 6mm thick teak wood beading made out of 1 st class well seasoned teak wood free from cracks and knots shall be provided all around the top all as shown on drawing and as directed. |
| 92 | M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 93 | M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 94 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 95 | Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 96 | M & L for removing unsv top of Table dinning 8 Persons C3/MEC/SP/193 by S & F new table top in one piece made out of 18/19mm thick plywood BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging made out of 1 st class well seasoned teak wood free from cracks and knots all around the top all as shown on drawing and as directed . |
| 97 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 98 | Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 99 | M & L for removing unsv top of Table dinning 6 Persons MEC-2913 by S & F new table top in one piece made out of 18/19mm thick plywood BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed . |
| 100 | M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 101 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 102 | Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 103 | M & L for removing unsv top of Table dinning 6 Persons(1500 x 900mm) FD/MAP-II/03 by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board confirming to IS including teak wood edging 6 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed . |
| 104 | M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 105 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 106 | Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 107 | M & L for removing unsv top of Table dinning 6 Persons 1500 x 900 mm FD-273 by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS including teak wood edging 6 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed . |
| 108 | M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 109 | M & L for removing unsv short rail of table by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 110 | M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 111 | M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 112 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 113 | Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 114 | M & L for removing unsv top of Table dinning 4 Persons(1200 x 900mm) FD/MAP-II/03 by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board confirming to IS including teak wood edging 4 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed . |
| 115 | M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 116 | M & L for removing unsv short rail of table by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 117 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 118 | Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 119 | M & L for removing unsv top of Table dinning 4 Persons MEC 178, MEC-179 by S & F new table top in one piece made out of 18/19mm thick plywood BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed . |
| 120 | M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 121 | M & L for removing unsv leg of table by S & F new leg out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 122 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 123 | Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 124 | M & L for removing unsv top of Table dinning 1200 x 900 FD-273 by S & F new table top in one piece made out of 18/19mm thick prelaminated MDF board confirming to including teak wood edging 6 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed . |
| 125 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 126 | Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 127 | M & L for removing unsv top of Table peg C3/MEC/SP/202/MO/14 by S & F new table top in one piece made out of 18/19 mm thick plywood BWP grade ISI marked fixed with 1.5 mm thick decorative lamination including well seasoned teak wood edging 6 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing. |
| 128 | M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 129 | M & L for removing unsv short rail of table by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 130 | M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 131 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 132 | Preparation of old decorated / new replaced parts /surface of table peg smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 133 | M & L for removing unsv top of Table Peg FD-384 by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing. |
| 134 | M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 135 | M & L for removing unsv leg of table by S & F new leg out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 136 | M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 137 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 138 | Preparation of old decorated / new replaced parts /surface of table peg smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 139 | M & L for removing unsv top of Table writing FD-275 (1200x600) by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned teak wood edging free from cracks and knots shall be provided all around the top all as directed and as shown on drawing. |
| 140 | M & L for removing unsv door shutter of table by S & F door shutter made out of 18/19 mm thick pre laminated particle board exterior grade ISI marked of required shade including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing. |
| 141 | M & L for removing unsv hinges of table by S & F new CP piano type hinges of superior all as shown on drawing (as per sample). |
| 142 | M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 143 | M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 144 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 145 | M & L for removing unsv CP knob/Handle of table by S & F new Handle SS 75mm (as per sample) of superior quality as per sample approved all as directed. |
| 146 | M & L for removing unsv drawer table by S & F new drawer including Handle SS 75mm (as per sample) of superior quality all as shown on drawing and as specified. |
| 147 | Preparation of old decorated / new replaced parts /surface of table writing smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 148 | M & L for removing unsv top of Table with drawer 90 x 60 x 76 cm MEC-176 by S & F new table top in one piece made out of 18/19 mm thick plywood BWP grade ISI marked duly fixed with 1.5 mm thick decorative lamination of required shade including well seasoned teak wood edging 6 mm thick free from cracks and knots shall be provided all around the top all as directed and as shown on drawing. |
| 149 | M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 150 | M & L for removing unsv short rail of table by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 151 | M & L for removing unsv leg of table by S & F new leg out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 152 | M & L for removing unsv CP knob/Handle from table by S & F new CP Knob of superior quality as per sample approved all as shown on drawing and as specified. |
| 153 | M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 154 | M & L for removing unsv hinges of shutter of table by S & F new CP piano type hinges of superior quality as per sample approved all as directed. |
| 155 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 156 | M & L for removing unsv back ply of table by S & F new back ply in one piece made out of 6 mm thick plywood BWP grade ISI marked all as shown on drawing. |
| 157 | Preparation of old decorated / new replaced parts /surface of table with drawer smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 158 | M & L for removing unsv back mirror plywood of Table dressing gents MEC-173 by S & F new back made out of 6 mm thick plywood BWP grade ISI marked as as shown on drawing. |
| 159 | M & L for removing unsv frame by S & F new frame made out of 1 st class well seasoned teak wood free from cracks and knots all as specified and as shown on drawing. |
| 160 | M & L for removing unsv beading from mirror by S & F new beading made out of 1 st class well seasoned teak wood free from cracks and knots all as specified and as shown on drawing. |
| 161 | M&L for removing of unsv old looking mirror by S & F new sheet glass electro-copper plated mirror 5mm thick all as specified and as shown on drawing. |
| 162 | M & L for removing unsv drawer of table by S & F new drawer made out of 12 mm thick plywood BWP grade & bottom ply 6mm thick including CP Knob of superior quality all as per shown on drawing and as specified. |
| 163 | M & L for removing unsv sliding glass of table by S & F new plain glass 5 mm thick of superior quality all as per shown on drawing and as specified. |
| 164 | M & L for removing unsv CP knob/Handle of table by S & F new CP Knob of superior quality as per sample approved all as directed. |
| 165 | Preparation of old decorated / new replaced parts /surface of table dressing gents smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 166 | M&L for removing of unsv old mirror of Table dressing gents C3/MEC/SP/203/MO/26 by S & F new sheet glass electro-copper plated mirror 5mm thick indlidung all as specified and as shown on drawing. |
| 167 | M & L for removing unsv back plywood from mirror of table by S & F new back made out of 6 mm thick plywood BWP grade ISI marked as as shown on drawing. |
| 168 | M & L for removing unsv drawer table by S & F new drawer made out of 12 mm thick plywood BWP grade including CP Knob (as per sample) of superior quality all as per shown on drawing and as specified. |
| 169 | M & L for removing unsv CP knob of table by S & F new CP Knob (as per sample) of superior quality as per sample approved all as directed. |
| 170 | Preparation of old decorated / new replaced parts /surface of table dressing gents smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 171 | M&L for removing of unsv mirror of table of Dressing mirror gents FD/E6/MAP/16 by S & F new sheet glass electro-copper plated mirror of size 60x1200x5mm thick all as shown on drawing. |
| 172 | M & L for removing unsv back plywood of frame by S & F new back made out of 12 mm thick plywood BWP grade ISI marked as as shown on drawing. |
| 173 | M & L for removing unsv glass shelves with glass holder of table by S & F new 5 mm thick plain glass of superior quality with glass holder all as specified and as directed. |
| 174 | M & L for removing unsv hinges of table by S & F new CP piano type hinges of superior quality all as shown on drawing and as specified. |
| 175 | M & L for removing unsv magnetic catcher by S & F new magnatic catcher of superior quality as per sample approved all as shown on drawing and as specified. |
| 176 | Preparation of old decorated / new replaced parts /surface of dressing mirror gents smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 177 | M & L for removing unsv top of Teapoy FD-382 by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned teak wood edging 6 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing. |
| 178 | M & L for removing unsv stiffener of teapoy by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 179 | M & L for removing unsv leg of table by S & F new leg out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 180 | M & L for removing unsv hard rubber shoe of teapoy by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 181 | Preparation of old decorated / new replaced parts /surface of teapoy smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 182 | M & L for removing unsv top of Teapoy C3/MO/SP/202/MO/29 by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned teak wood edging 6 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing. |
| 183 | M & L for removing unsv top long rail of table by S & F new top long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 184 | M & L for removing unsv leg of table by S & F new leg out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 185 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 186 | Preparation of old decorated / new replaced parts /surface of teapoy smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 187 | M & L for removing unsv top of Table centre FD-274 by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board of required shade exterior grade confirming to IS including teak wood edging 6 mm thick made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed . |
| 188 | M & L for removing unsv stiffener of table by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 189 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 190 | Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 191 | M & L for removing unsv glass top of Table centre with glass top 2 tier MEC-2911 by S & F new 8mm thick Black glass top all as shown on drawing. |
| 192 | M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 193 | M & L for removing unsv long stiffener of table by S & F new long stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 194 | M & L for removing unsv short stiffener of table by S & F new short stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 195 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 196 | Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 197 | M & L for removing unsv glass top of Table centre C3/MEC/202/MO/24 by S & F new 8mm thick plain glass top all as shown on drawing. |
| 198 | M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick plywood BWP grade confirming to IS all as shown on drawing and as directed. |
| 199 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 200 | Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 201 | M & L for removing unsv top of Table centre MEC-177 by S & F new table top in one piece made out of 18/19mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging 6 mm thick made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed . |
| 202 | M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 203 | M & L for removing unsv short rail of table by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 204 | M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 205 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 206 | Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 207 | Taking out unserviceable top of Side Board FD-241 and S&F new top made out of pre laminated particle board 18/19mm thick (one side teak finesh shade and other side white balancing lamination) with 4mm thick teak wood edging all round all as per drg |
| 208 | Taking out unserviceable drawer and S&F new drawer made out of prelaminated particle board 18/19mm thick all as per drg. |
| 209 | Taking out unserviceable back ply of side board and S&F new back made out of ply wood 6mm thick both side commercial as per drg. |
| 210 | Taking out unserviceable shutter complete set and S&F new shutter made out of prelaminated particle board 18/19mm thick (one side teak finesh shade and other side white balancing lamination) with 4mm thick teak wood edging shutter to be fixed with mild steel chromium plated continuous piano hinges with screw steel of required size.as directed and as per drg. |
| 211 | Taking out unserviceable side of side board and S&F new side pre laminated particle board 18/19mm thick as per required size all as per drg. |
| 212 | Taking out unserviceable shelf cabinet and S&F new shelf cabinet pre-laminated particle board 18/19mm all as per drg. |
| 213 | Taking out unserviceable Knob/Handle of shutter front of drawer and S&F of new knob fancy type steel handle heavy duty of approved design as per directed. |
| 214 | Taking out unserviceable long bottom rail of trestle portion with legs and S&F of new bottom long rail of trestle portion with legs as per required size 2nd class hard wood all as per drg. |
| 215 | Taking out of unserviceable mirror of Table Dressing Ladies FD-378/FD-251/FD/MAP-II/07 and S&F new mirror of size 1220x365x5mm thick fixed with hard wood framing of 45mmx40mm size with back 6mm thcik plywood. All as per drg. |
| 216 | Taking out of unserviceable top & bottom of table dressing ladies and S&F new top & bottom made up of 18/19mm thick prelaminated particle board (one side teak finesh and other side white balancing lamination) all as directed. |
| 217 | Taking ou unserviceable sliding glass shutter and S&F with new glass shutter of required size and thickness of glass 6mm all as shown on drg. |
| 218 | Taking out unserviceable back ply of table dressing and S&F of new back ply made of 6mm thick both side as directed. |
| 219 | Taking out unserviceable drawer and S&F of new drawer made out of prelaminated particle board front side and both side 12mm plywood and bottom 6mm commercial including Knobs as specified. |
| 220 | Taking out of unserviceable long bottom rail of trestle portion and S&F of new bottom trestle portion made out of 2nd class hard wood as per drg. |
| 221 | Taking out unserviceable top /bottom/shelf of Table Bed Side FD-276/ FD-28/ FD-210/ FD-248 and S&F new top /bottom/shelf made out of 18/19mm thick prelaminated particle board with teak wood edging as directed. |
| 222 | Taking out ply wood at back of table bed side and S&F new plywood 6mm thick one side teak veneered other side commercial as per drg. |
| 223 | M&L for supply & fixing of 1st class teakwood Front leg of Chair Easy EPL:SP-07-RO free from cracks and knots including removal of old unsv front leg and tightening of frame work all as shown as per drawing all as specified and directed by Engr-in-charge- |
| 224 | -ditto-all as per item No.43.00 one above but for Rear leg |
| 225 | -ditto-all as per item No.43.00 one above but for Side seat rails. |
| 226 | M&L for removing the unserviceable seats of chair easy and replacing the same by S&F 50mm thick, 40 density foam with fabric on sofa seat of 12mm thick BWP ply all as shown on drawing. |
| 227 | Preparation of old decorated / new replaced parts /surface of chair easy smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 228 | M & L for removing unsv glass top of Table centre with glass top EPL:SP-10-RO by S & F new 8mm thick Black glass top all as shown on drawing. |
| 229 | M & L for removing unsv leg of table by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 230 | M & L for removing unsv long stiffener of table by S & F new long stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 231 | M & L for removing unsv short stiffener of table by S & F new short stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. |
| 232 | M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed. |
| 233 | Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed. |
| 234 | M&L for supply & fixing of 1st class teakwood Front leg of Chair dining EPL: SP-R1 free from cracks and knots including removal of old unsv front leg and tightening of frame work all as shown as per drawing all as specified and directed by Engr-in-charge- |
| 235 | All as per Item No. 45.00 one above but for Rear leg |
| 236 | M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing. |
| 237 | M&L for removing the unserviceable/broken seat of chair dinning and replacing the same by S&F of new made out of 12mm thick plywood BWP grade fixed with 1mm thick lamination finish including tightening of the frame work all shown as per drawing. |
| 238 | Preparation of old decorated / new replaced parts /surface of chair dining smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed. |
| 239 | M & L for removing unsv plywood top of Bed with box type C3/MEC/SP/175 and S & F new top made out of 12 mm thick plywood commercial BWP grade ISI marked of size 838x965mm all as directed and as shown on drawing. |
| 240 | M & L for removing unsv plywood front and back of head board of bed and S & F new 32 mm thick board ISI marked (770 x 900mm) duly fixed with 1mm thick decorative lamination teak veneer finished Front Side (300 x 900) & Back side (750 x 900) all as shown on drawing and as directed. |
| 241 | M & L for removing unsv plywood front and back of foot board of bed and S & F new block board ISI marked (470 x 900mm) duly fixed with 1mm thick decorative lamination teak veneer finish outer side (470 x 900) and inner side (75x900) all as shown on drawing and as directed. |
| 242 | M & L for removing unsv side rail of bed by S & F new side rail made out 9mm thick plywood BWP grade ISI marked duly fixed with 1.5mm thick decorative lamination teak veneer finished including 1st class teak support free from knots and cracks shall be provided all as shown on drawing and as directed. |
| 243 | M & L for removing unsv bottom plywood of bed by S & F new bottom made out of 9 mm thick plywood BWP grade ISI marked all as shown on drawing. |
| 244 | M & L for removing unsv stiffener by S & F new stiffener made out of II nd class Hard wood all as directed and as shown on drawing. |
| 245 | M & L for removing unsv PVC hard shoes from bed by S & F new PVC rubber shoe of superior quality as per sample approved. |
| 246 | Preparation of old decorated / new replaced parts /surface of bed box type smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed. |
| 247 | Taking out of unserviceable mirror of Table Dressing with Mirror Unit EPL: SP-17-RO & EPL: SP-18-RO and S&F new mirror of size 1050x500x5mm thick fixed with hard wood framing of 50mmx50mm size with back 6mm thick plywood. All as per drg. |
| 248 | Taking out of unserviceable top & bottom of table dressing ladies and S&F new top & bottom made up of 18/19mm thick prelaminated particle board (one side teak finesh and other side white balancing lamination) all as directed. |
| 249 | Taking out unserviceable 250mm telescopic channel and S&F with new glass shutter of required size and thickness of glass 6mm all as shown on drg. |
| 250 | Taking out unserviceable back ply of table dressing and S&F of new back ply made of 6mm thick both side commercial as directed. |
| 251 | Taking out unserviceable door and S&F of new mirrror made out of with 1.0mm wide lam on both side with 12mm BWP plywood and bottom 6mm including SS Knobs as specified. |
| 252 | Taking out of unserviceable door of Multipurpose Bin Linen (1200x450x720), EPL: SP-16-RO and S&F door of size 615x325 with 15x8mm vertical strips and 20x20mm thick teak wood all as per drawings. |
| 253 | Taking out of unserviceable top & bottom of Bin linen Multipurpose and S&F new top & bottom made up of 1mm thick lam over 19mm BWP plywood and as per drawings. |
| 254 | Taking out unserviceable SS handle and S&F with new SS handle of required size a as shown on drg. |
| 255 | Taking out unserviceable back ply of S&F top finished 1.5mm thick lam over 19mm thick BWP Plywood as directed. |
| 256 | Taking out unserviceable drawer and S&F new drawer with 1mm thick lam over 18mm thick BWP plywood as per drawaing and S&F new knobs.Note : i) Repair work of furniture should be executed where the furniture exist at BSO furniture yard different user locations and various Md Accn under GE (SB) Karwar as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender