Tender For Smart Periodical To Md Accn Under Age B/R-Ii Of Ge (S) Mamun
Tender Value
70 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
27 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smart Periodical To Md Accn Under Age B/R-Ii Of Ge (S) Mamun
BOQ
| Sl. No. | Item Description |
| 1 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 2 | M & L water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:-Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations.Step 3 :- Allow 6-8 hrs time to dry the putty surface. |
| 3 | M & L one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 4 | M & L water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algai properties in two coats @ 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed. |
| 5 | Notes for Srl item No. 1 to 4 :-The work for periodical services shall include the following elements and the rates quoted by the bidders shall be deemed to include for the same:-(a) The work pertaining to periodical services shall be executed by the contractor through authorised applicator of manufacturer of the materials like Exterior Emulsion paint, putty etc after prior approval of the GE in writing. A MOU to this effect shall be submitted immediately after placing Work Order No 1 by GE.(b) The Contractor shall upload the \\"Memoradum of Understanding\\" (MOU) entered into, with at least one of the approved manufacturers/ manufacturers mentioned in the contract immediately after placing Work Order No 1 by GE.(c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures and safety norms as required.(d) Removing of Nails, making good holes, cracks etc(e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.(f) Spreading and removing protective covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint/putty to be cleaned to the entire satisfaction of Engineer-in-Charge.(h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.(i) while painting the external wall the CI / PVC pipe should be removed before starting the work and refix after painting work. |
| 6 | M&L cement plastering 12 mm thick in cement mortar 1:4 including mixing liquid WPC of approved manufacturer as per manufacturers instruction @ 0.200 ltr in 50 Kg of cement on brick work or concrete surfaces or in chajjas/parapet walls etc, surfaces finished even and smooth without using extra cement including taking down of existing plaster of any description complete all as specified and directed Note: WPC will be measured and paid separately. |
| 7 | M&L 10mm thick rendering or plastering work in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, using WPC liquid including taking out peeled off plaster / concrete if required and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed. |
| 8 | Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar 1:3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3, complete all as specified and directed. |
| 9 | M&L for cleaning, breaking, loose concrete, changing / replacing corroded reinforcement and filling plain cement concrete 1:1½ :3 type B0 (using 12.5mm graded aggregate) at places like chajja, sun shades, roof projection, fascia, etc., complete all as specified & directed.Note :- Reinforcement shall be measured and paid seperately. |
| 10 | M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 11 | Supply only liquid water proofing compound of appproved make complete all as specified & directed. |
| 12 | Writing letters or figures (Block, Roman, Italic or Indian & Writing Stops, commas, short lines, dashes, hyphens, brackets etc) n exc 30 cm high. The colour of paint and dimension of letter to be used shall be approved from the Engineer-in-charge prior to execute of work complete all as specified and directed. |
| 13 | M&L for preparing old painted steel and iron surfaces of any description including CI Pipes , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 14 | Supply & fixed in repair, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable clamp complete all as specified and directed. |
| 15 | Supply & fixed, 110 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified and directed. |
| 16 | Supply & fixed in repair, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls /trench with suitable clamp complete all as specified and directed. |
| 17 | Supply & fixed, 75 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified and directed. |
| 18 | M&L for preparation of old decorated surfaces of ceiling of any description by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed. |
| 19 | M&L for preparation of old decorated surfaces of walls of any description by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed. |
| 20 | M&L for preparation of old decorated surfaces of walls of any description and applying one coat of oil bound distemper, white or tinted, including removing nails etc and making good the disturbed surface complete all as specified and directed. |
| 21 | M&L for complete removal of existing treatment, preparation of surfaces, applying 1mm thick wall care putty making the surface even & smooth and applying two coats of oil emulsion distemper over complete all as specified and directed. |
| 22 | Taking down cement plaster from brick / stone /concrete walls including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 23 | M&L for rendering 15mm thick cement plaster in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for rendering 10 mm thick plaster on fair face of brick work or concrete surface as in ceiling in cement mortar 1:3, finished even and smooth without using extra cement, including necessary scaffolding complete all as specified and directed. |
| 25 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed. |
| 26 | M&L for preparation of new surfaces of ceiling of any description, and applying two coats of white wash,on old decorative surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
| 27 | M&L for preparation of new surfaces of ceiling of any description, and applying two coats of white wash,on old decorative surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender