Tender For Petty Day To Day B/R Repair In Tech Area At Jammu And Kaluchak Under Ge (Af ) Stn Jammu
Tender Value
18 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
16 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Day To Day B/R Repair In Tech Area At Jammu And Kaluchak Under Ge (Af ) Stn Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Checking & attending complaints pertaining to joinery (wooden/ aluminum/) iron/ aluminium mongery, pelmet box, door springs, etc requiring carpentry work and carrying out minor repairs such as tightening/replacing of screws/nails, minor adjustment/easing of joinery, door etc. including petty repairs and material like screws/nails, plug, butt hinges 50/75mm etc. to make it functional by providing minimum one carpenter/aluminium fabricator and one helper as per time to time requirement as intimated by JE concerned/ Engr-in-Charge (with necessary tools) complete all as specified and diected by Engr-in-charge. Note : Any builders hardware items except mentioned above required to be replaced shall be paid seperatly under respective item. |
| 2 | Checking and attending to welding repairs works to steel windows, handles, door springs, iron frame of doors, rolling shutter of garages and other misc iron repair works by welding (run or spot welding as per site requirement) by providing minimum one welder and one helper alongwith welding machine, gloves, welding glass, welding rod etc or any other tools required, as per time to time requirement as intimated by JE concerned/ Engr-in-Charge and whenever required complete all as specified and diected by Engr-in-charge. |
| 3 | Checking of floor, plinth, plaster etc requiring masonary work and carrying out minor repairs such as broken edges patches etc, including petty repairs, material like sand, cement & stone aggregates to make it functional by providing minimum one mason and one helper as per time to time requirement as intimated by JE concerned/ Engr-in-Charge (with necessary tools) etc. complete all as specified and directed . Note:- Any items required to be replaced or major repair shall be paid under respective items. |
| 4 | Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittingS&Fixtures and any obstruction to water supply, requiring plumbing work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), caps/spindle for taps, M-seal, screws, nails etc to make water supply/ plumbing lines functional and leak proof by providing minimum one plumber and one helper as per time to time requirement as intimated by JE concerned/ Engr-in-Charge (with necessary tools) etc. complete all as specified and directed . Note : The complaints intimated to contractor shall be completed to the entire satisfaction of Engr-in-Charge within a period of maximum 02 days and an amount of Rs. 200.00 will be recovered for un-attended complaints. |
| 5 | Cleaning of blocked WC/ BATH//WHB/Sink traps and CI /PVC pipe up to 1st manhole and removing all silt, residue sludge both organic and inorganic nature including any type of foreign material and removing waste material sludge etc to a distance exceeding 50 m any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge complete all as specified and diected by Engr-in-charge. |
| 6 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and as directed by Engr-in-Charge. |
| 7 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete including removal all debries exceeding 50m but not exceeding 100m all as specified and directed by Engineer-in-Charge. |
| 8 | M&L Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any redius in half brick thick wall built in cement mortar 1:4, complete all as specified and diected by Engr-in-charge. |
| 10 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar 1:6, complete all as specified and directed by Engr-in-charge. |
| 11 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces, other than fair face (without using extra cement) on walls in cement mortar 1:4 including liquid WPC @ 200 ml per bag of cement, complete all as specified and directed by Engr-in-charge.Note: Supply only liquid water proofing admixture shall be measured and paid seperately |
| 12 | M&L for Rendering 5mm thick on fair faces on concrete surfaces/ ceiling, finished even and smooth without using extra cement in cement mortar 1:4, complete all as specified and directed by Engr-in-charge. |
| 13 | M&L for making good the broken surface of chajja /facia/roof projection and the similar work by providing PCC 1:2:4 type B-0 using crushed stone aggregate, or providing 15mm thick cement plaster in CM 1:3 as per site Requirment as in patch including necessary formwork scafolding required hight of building n-exc 9.50 mtr complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and diected by Engr-in-charge. |
| 15 | M&L for joint free non skid coloured ceramic 7 to 8mm thick floor tiles of any design and pattern as approved by GE(square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles laid over & including ,15mm thick screed bed in CM (1:6) incl dismantling of old existing tiles or flooring of any description, removing rubbish outside MoD land complete all as specified and diected by Engr-in-charge. |
| 16 | All as per item no. 15 above but in dado / skirting etc. over and including 10 mm thick rendering in CM (1:4) incl dismantling of old existing tiles complete all as specified and diected by Engr-in-charge. |
| 17 | M&L joint free glazed ceramic coloured tiles of any design and pattern as approved by GE in vertical surface size 300mm x 600mm or 300mmx450mmx7mm thick or 250mm x 330mm x 7 mm thick set and jointed in neat cement slurry and pointed in in white or coloured cement to match the shade/colour of tiles laid over & including rendering 15mm thick in CM (1:4) as in backing coat incl dismantling of old existing tiles or plaster and removing rubbish outside MoD land complete all as specified and diected by Engr-in-charge. |
| 18 | M&L for vitrified light/Dark shade GVT / Double charged as approved by GE Ceramic tiles 8-10mm thick area of each tile exc 0.18 sqm & not less than 0.38sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles laid over & including rendering 15mm thick CM (1:4) screed bed or backing coat incl dismantling of old exisitng tiles of any description & removing rubbish outside MoD land complete all as specified and diected by Engr-in-charge. |
| 19 | Ditto all as per item no. 18 above but in dado / skirting etc. over and including 10 mm thick rendering in CM (1:4) incl dismantling of old existing tiles complete all as specified and diected by Engr-in-charge. |
| 20 | M&L for plain cement concrete type D-2, 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete all as specified and diected by Engr-in-charge. |
| 21 | M& L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including Dismentling of old tiles of any description complete all as specified and diected by Engr-in-charge. |
| 22 | M&L and applying two coats of elastomeric-acrylic waterproof protective cum decorative coating on external surface of RCC, concrete panels, plastered surface of wall etc. over a coat of primer including preparation of surfaces all as per manufactures instructions complete all as specified and diected by Engr-in-charge. Make: |
| 23 | M&L for applying two or more coat of Ist quality acrylic distemper (ready mixed) having VOC contents less than 50 gms/litre of approved manufacturerof required shade and colour complete as per manufacturer's specification including providing and applying plaster of paris putty 1 mm thickness over plastered surface to prepare the surface even and smooth, including priming of coat of interior primer incl. preparation of new surfaces of walls etc complete all as specified and diected by Engr-in-charge. |
| 24 | M&L for applying two coats of cement base paint of approved coloured including preparation of newly plastered surface over a coat of primer complete all as specified and directed |
| 25 | M&L for applying two or more coat of Ist quality acrylic distemper (ready mixed) having VOC contents less than 50 gms/litre of approved manufacturerof required shade and colour complete as per manufacturer's specification including providing and applying plaster of paris putty 1 mm thickness over plastered surface to prepare the surface even and smooth, including priming of coat of interior primer incl. preparation of old surfaces of walls etc complete all as specified and diected by Engr-in-charge. |
| 26 | M&L for prepration of old treated wood and wood based surfaces of any description and applying single coat of synthetic enamel paint,complete all as specified and diected by Engr-in-charge. |
| 27 | M&L for preparation of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide all as specified and diected by Engr-in-charge. |
| 28 | Complete removal of exisiting treatment on one coat of Acrylic Smooth exterior paint @ .835 ltr/10 sq of required shade over one coat of primer m complete all as specifiedand directed by Engg-in Charge. |
| 29 | Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removing demolished material to a distance and depositing to the distance exceeding 50 metres but not exceeding 100 mitres where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L for Granite work 18-20mm thick (Table rubbed and polished) in cooking platforms over 10mm thick screed bed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shede including rounding the edges complete all as specified and diected by Engr-in-charge. |
| 31 | M&L Cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in roof kerbs , coping cill ,Plinth course , rounded or chamfered on edge including necessary form work complete. all as specified and diected by Engr-in-charge. |
| 32 | M&L Cement concrete 1:3:6 type C2 using 40mm graded stone crushed aggregate in plinth protection, 75mm thick, finished even and smooth using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete. all as specified and diected by Engr-in-charge. |
| 33 | Demolition of reinforced cement concrete in any position not otherwise specifically provided, complete all as specified and directed . |
| 34 | M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for slabs supported on wall, beams and columns, in floor, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ,complete all as specified and diected by Engr-in-charge. |
| 35 | M&L for Steel reinforcement 10mm dia and over, TMT bars, cut to length, bent to shape required including, cranking, bending, spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and diected by Engr-in-charge. |
| 36 | M&L for steel reinforcement 6 to 8mm dia and over, TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and diected by Engr-in-charge. |
| 37 | Taking down wooden shutter of any dscription exc 1.00 Square metre but n. exc 2.00 Square metre ,easing and adjusting and than refixing shutters with old builder hardware as required in the same opening complete all as specified and diected by Engr-in-charge. |
| 38 | Taking down shutter of any description n.exc 2 Sqm each & removing from site of work complete all as specified and diected by Engr-in-charge. |
| 39 | Taking down chowkats or frames/aluminium frames with shutters (without taking off shutters from frames) area n-exc 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge. |
| 40 | Taking down chowkats or frames/aluminium frames (without taking off shutter from shutter ) area exc 1.50 sbut n exc 4 Sqm quare metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge. |
| 41 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene beeding/packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. with complete necesssary fittings all as specified. |
| 42 | Repair & refixing in same position of aluminium anodised door shutters of any description, size exceeding 1.50 Sqm but not exceeding 4.00 Square Metre by taking down/without taking off shutters from the frame, disconnecting carefully shutter member with deligated tools and as per manufacture's instructions. Removing broken aluminium mongeries, tilted/deformed aluminium beads, teared T rubber gasket and cleats in hollow blocks of rails and retightening in same position with excessess sectional area steel screws incl tightening mild steel rod with nuts in hollow blocks of members of shutters of lock side rail and hinge side rails and reassembling shutter with old retrieved members carefully such as ACP panel/prelaminated board, tinted glass 5.5 mm thick in same situations and securing both side with supply and fixing new rubber T gasket and aluminium beads to making the door air tight including refixing of old aluminum hinge, tower bolt, mortice lock, bolts, handle, door stoppers, hydraulic door closer and refixing shutters in same opening after assuring complete alignment etc. Repairing floor spring where provided including making good alignments. Also adjusting door chowkats and frame and refixing with new rowl plugs & 3 to 4\\" long standard steel flat headed screws and assuring the strength of chowkatS&Frames before refixing shutters etc complete all as specified and diected by Engr-in-charge. |
| 43 | S&F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 83 x 44 mm , bottom rail & lock rail size is 110 x 44 mm & style of door shutter is 83mmx 44 mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangement,floor spring and floor door stopper incl. necessary joining cleats , glazing clips, in lieu of old unservicable wooden/steel/aluminium/PVC door/shutter/frames, etc complete all as specified and directed by Engineer-in -charge.(Al. section thickness 2 mm } ) |
| 44 | S&F powder coated aluminium ventilators of Aluminium section weighing not less than 0.55kg/m, partially fixed and partially openable either top hung or side hung and bottom portion fixed having 4mm thick frosted glass and top portion having two shutters external shutter with 4mm thick frosted glass and interal shutter having stainless steel wiremesh 0.36mm dia for Bath / WC including rubber gasket and alumium beading with necessary cleats / locking arrangement complete all as per standard engineering practice including necessary cutting holes on wall and floor , in lieu of old unservicable wooden/steel/aluminium/PVC Ventilator/frames, complete all as directed by Engr-in- Charge. |
| 45 | S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor , in lieu of old unservicable wooden/steel/aluminium/PVC window/frames, and confirming to IS complete all as directed (Al. section thickness 1.50 mm } |
| 46 | S&F glazed 12 mm thick toughened glass with frosted film on both sides of glass as in door/sliding door with all necessary jointing cleats and all necessary stainless steel fitments complete all as specified and directed by Engr-in-charge. |
| 47 | S&F in repair Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. |
| 48 | S&F for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, exceeding 1.5 sqm, complete all as specified and diected by Engr-in-charge. |
| 49 | S&F for Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and diected by Engr-in-charge. |
| 50 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including all fittings complete all as specified and diected by Engr-in-charge. |
| 51 | S&F 2nd class HW plain solid straight chowkhatS&Frame wrought framed rebated on the solid, rounded or chamferred put together with glue pinned at joints including taking down o/u shutters complete all as specified and diected by Engr-in-charge. |
| 52 | S&F for factory made 35mm thick 2nd class hard wood Plain, framed, panelled shutters, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treatedmedium density, wood particle board with commercial face veneers fitted to chowkhat complete all as specified and as directed by Engineer-in-Charge. |
| 53 | S&F for factory made 35mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I sec 8 clause 8.20 (a), fixed to chowkhat all as specified and as directed by Engineer-in-Charge. |
| 54 | S&F In repair pressed steel doors frames of size 105x60 with one or more rebates icluding necessary fixing lugs, hinges, lock stricke plate etc,including filling of PCC 1:2:4 type B-0,complete,as specified and directed by engr in charge. |
| 55 | S&F In repair pressed steel doors frames of size 125x60 with one or more rebates icluding necessary fixing lugs, hinges, lock stricke plate etc including filling of PCC 1:2:4 type B-0,,complete,as specified and directed by engr in charge. |
| 56 | S&F Flush shutters, solid core construction 30mm with block board core and plywood face panels, commercial type on both sides complete all as specified and diected by Engr-in-charge. |
| 57 | Dismantling of timber scantlings in fillets, posts, raftars, purlins etc under 40 sqcm in section complete in unframed work. |
| 58 | M&L for plywood 12 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/ nails to timber frame work in wall portion. All as specified and directed by Engr-in-charge, complete. |
| 59 | M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25 sqcm secured with nails complete all as specified and diected by Engr-in-charge. |
| 60 | M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area n-exc 3 Sqcm secured with nails complete all as specified and diected by Engr-in-charge. |
| 61 | S&F Ply wood, 6mm thick, 5 ply, grade BWR, type BB, fixed with nails to timber frame work fixed in repair complete all as specified and diected by Engr-in-charge. |
| 62 | S&F Continuous (piano) hinges width of flaps 40 mm when opened, mild steel, bright finish or electrogalvanised complete all as specified and diected by Engr-in-charge. |
| 63 | S&F for Aluminium alloy Butt hinges 100 /125mm long, anodised, with galvanised mild steel hinge pin fixed in repair, complete all as specified and diected by Engr-in-charge. |
| 64 | S&F for Aluminium alloy Butt hinges 100 /125mm long, anodised, with galvanised mild steel hinge pin, complete all as specified and diected by Engr-in-charge. |
| 65 | S&F for steel Butt hinges 100 /125mm long, anodised, with galvanised mild steel hinge pin fixed in repair, complete all as specified and diected by Engr-in-charge. |
| 66 | S&F for Aluminium alloy, anodised, sliding door bolt, 250mm long,fixed in repair with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and diected by Engr-in-charge. |
| 67 | S&F for Aluminium alloy, anodised, sliding door bolt, 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and diected by Engr-in-charge. |
| 68 | S&F for Aluminum, anodized, barrel tower bolts, of extruded section 150 mm long, fixed in repair complete all as specified and diected by Engr-in-charge. |
| 69 | S&F for Aluminum, anodized, barrel tower bolts, of extruded section 150 mm long, complete all as specified and diected by Engr-in-charge. |
| 70 | S&F for aluminum alloy handle, cast type, anodized 150mm size, fixed in repairs complete all as specified and diected by Engr-in-charge. |
| 71 | S&F for aluminum alloy handle, cast type, anodized 150mm size, complete all as specified and diected by Engr-in-charge. |
| 72 | S&F for Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm complete all as specified and diected by Engr-in-charge. |
| 73 | S&F for Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete all as specified and diected by Engr-in-charge. |
| 74 | S&F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed in repair including taking down carefully aluminium door without demaging any member/part and re-fixing the the same including easing complete all as specified and diected by Engr-in-charge. |
| 75 | S&F for aluminium die cast body door closed hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg fixed in repair complete all as specified and diected by Engr-in-charge. |
| 76 | S&F rubber door seal 32mm wide and 1.5mm thick strip of mild steel with hard brush fixed with machine steel screw with washer in door bottom fixed in repair complete all as specified and diected by Engr-in-charge. |
| 77 | S&F in repair stainless steel wire cloth 0.46mm nominal dia wire and average width of aperture 1.36 mm and fixed with tinned tacks of galvanised wire staple to steel windowS&Fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified and diected by Engr-in-charge. |
| 78 | S&F stainless steel wire cloth 0.46mm nominal dia wire and average width of aperture 1.36 mm and fixed with tinned tacks of galvanised wire staple to steel windowS&Fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified and diected by Engr-in-charge. |
| 79 | S&F in repair 125mm hasp & staple safety type of aluminum with mild steel hinge including bolt to hinge plate and fixed with screw complete all as specified and diected by Engr-in-charge. |
| 80 | S&F for 3.00mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square not exceeding 0.5 Square metre in each pane etc including Hacking out old broken glass (any thickness size quality or description) from wooden pane glazed with putty or fixed with wooden bends complete all as specified and diected by Engr-in-charge. |
| 81 | S&F for 3.00mm thick figured type pin headed glass sheet ordinary quality and glazing with oil putty/ wooden beads with nails in square not exceeding 0.5 Square metre in each pane etc complete all as specified and diected by Engr-in-charge. |
| 82 | S&F for 5.5 mm thick sheet plain or tinted selected quality glass fixed with neoprene rubber beading/ oil putty/wooden beading exc 0.5 Square metre in each pane etc complete all as specified and diected by Engr-in-charge. |
| 83 | S&F for magnetic catcher with steel body ‘H’ type, fixed to shutter, fixed in repairs, complete all as specified and diected by Engr-in-charge. |
| 84 | Supply and Fixing brass mortice lock four levers vertical type size 100mm or above fixed in repairs, complete all as specified and as directed by Engr-in-Charge. |
| 85 | S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire of dia 4mm as per manufacturer instruction as in ceiling with and including S&F white non asbestos designer ceiling cement boards 4 mm thick , including dismantling ceiling boards (fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.dicomplete all as specified and diected by Engr-in-charge. |
| 86 | S&F for PVC wall lining consisting of 5mm thick prelaminated colour(natural wood effect/wood grain printed) PVC sheet of density 600 Kg/cum inclusive of solvent cement solution and fiting at site on PVC frame as per specified including dismantling wall lining boards (fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.and directed by Engr-In-Charge. |
| 87 | Dismantling wrought iron or mild steel work,frame work such as truss, wind tie, angle frame work , concertina coil of any description complete all as specified and diected by Engr-in-charge. |
| 88 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F in repair Decorative Stainless steel tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and diected by Engr-in-charge. |
| 90 | S&F for stainless steel rounded block made in round shape and chromium coated which will be match suitable for curtain rod 25mm dia fixed in repair complete all as specified and as directed. |
| 91 | S&F Stainless steel brackets set curtain inials with fitting accessories curtain rod holder set for doors & windows made in shape and size to hold certain rods and size of bracket 150mm for curatin rod of 25mm complete all as spd and directed by engr-in-charge. |
| 92 | Disconnecting existing tanks capacity of tanks exc 250 Litre and n.exc 500 Litre setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge. |
| 93 | Disconnecting existing tanks capacity of tanks exc 500 Litre and n.exc 1000 Litre setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge. |
| 94 | S&F Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories with float valve etc(i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge. |
| 95 | S&F Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories with float valve etc, (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge. |
| 96 | S&F 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gram), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge. |
| 97 | S&F 15mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 142 gram), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge. |
| 98 | S&F in repairs PVC water tank cover for 1000 Litre and 500 Litre capacity including proper fixing with clamp &nut bolt complete all as specified and diected by Engr-in-charge. |
| 99 | M&L for 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors including taking down all as specified and diected by Engr-in-charge. |
| 100 | Re fixing only 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors including taking down all as specified and diected by Engr-in-charge. |
| 101 | M&L for 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors and including taking down all as specified and diected by Engr-in-charge. |
| 102 | Re fixing only 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floor including taking down complete all as specified and diected by Engr-in-charge. |
| 103 | S&F in repairs Gate Valve 20 mm, cast copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and diected by Engr-in-charge. |
| 104 | S&F in repair Angle valve/Stop valve/cock, ISI Marked, cast copper alloy / CP , screwed down, high pressure with handle, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, fixed in repairs, complete all as specified and diected by Engr-in-charge. |
| 105 | S&F in repairs brass spindle for 15mm size stop cock all as specified and diected by Engr-in-charge. |
| 106 | S&F in repairs 15mm dia bib tap fancy type ISI Marked, cast copper alloy chromium plated with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed all as specified and diected by Engr-in-charge. |
| 107 | S&F 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 108 | Supply and fixing 15mm bore center hole basin mixer with regular spout with pop up waste assembly with 10mm dia 450mm long braided hoses and brass nuts, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. |
| 109 | M&L for 15mm bore, Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge. |
| 110 | S&F brass Chromium plated over head shower rose with swivel joints, any size, including 190mm long arm fixed to pipe or union of 15mm bore, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. |
| 111 | S&F vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, complete all as specified and as directed by Engr-in-Charge. |
| 112 | S&F Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, including brass CP jet nozzle with 900mm long PVC pipe, fixed in repairs complete all as specified and as directed by Engr-in-Charge. |
| 113 | Plastic seat cover for water closet seat, white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed in repairs complete all as specified and as directed by Engr-in-Charge. |
| 114 | S&F 110 mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall or laid in trenches with mild steel clamps including bends and Junction single (singleT) including taking down old unservicable any pipe with fiffings complete all as specified. |
| 115 | S&F 75 mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall or laid in trenches with mild steel clamps including bends and Junction single (singleT) including taking down old unservicable any pipe with fiffings complete all as specified. |
| 116 | S&F in repair PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and diected by Engr-in-charge. |
| 117 | S&F in repairs Health faucet (ABS body) mild steel chrpmium plated sutaible for 15 mm dia pipe with 1.25 Mtr long flexible tube and ABS Wall hook including making connections and fixed in position complete all as specified and directed by Engr-in- charge |
| 118 | S&F for Flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, fixed in repairs complete all as specified and diected by Engr-in-charge. |
| 119 | S&F of Viterous china wash basin, white flat back size 550 x 400mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed by Engr-in-Charge. |
| 120 | S&F in repairs vitreous china urinal flat back 465 x 355 x 265mm size, including grating and Connection to flushing pipe and outgoing pipe complete all as specified and diected by Engr-in-charge. |
| 121 | S&F of Stainless steel sink, with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm fixed in repairs complete all as specified and as directed. |
| 122 | S&F Stainless steel plate 1 mm thick , racks size(30\\"x36\\"x10\\") fixed with steel fasteners or steel screw complete all as specified and diected by Engr-in-charge. |
| 123 | S&F PVC low density waste pipe 32mm/40mm bore of standard length with cup and washers for urinal/WHB, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. |
| 124 | S&F for Waste coupling of PTMT (half or full threaded), 32mm/40mm bore dia of discharge pipe (Minimum weight 32mm-45gms/40mm-60 gms) fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 125 | S&F for Stainless steel waste coupling for S.S Sink 75mm to 100mm dia set with rubber washer plug etc fixed in repairs complete all as specified and diected by Engr-in-charge. |
| 126 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm/600mm, fixed in repairs, complete all as specified and diected by Engr-in-charge. |
| 127 | S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and diected by Engr-in-charge. |
| 128 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete includind dismantling of old unserviceabe asbestos/GI sheet all as specified and diected by Engr-in-charge. |
| 129 | S&F in repairs looking mirror of size 600mmx450mm and 5.0mm thick mirror with aluminum beading of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wood plugs with complete all as specified and diected by Engr-in-charge. |
| 130 | S&F in repairs tubular towel rail, 20mm dia, ‘D’ type 60cm long between flanges of brass CP complete all as specified and diected by Engr-in-charge. |
| 131 | S&F in repairs CP grating /central hole grating 100mm dia as suitable to existing trap as per requirement all as spd and directed by Engg-in-Charge |
| 132 | S&F in reapired Carnival White Rimless Wall Hunging EWC seat Finish matte outside and glossy inside duroplast soft seat cover size 510x365x380 with cistern celeia size 460x87x510mm and angle cock with wall flange and health Faucet ABS body with 1mtr ss Braided connection pipe complete smooth functioning as per manufacturer instruction etc all as specified and diected by Engr-in-charge.Cera clair cat no S1044144MW, cat no B1110104, cat no ,F8030109AB Cat no F1099201 ).Note:All Material Shall be approved by GE,NO given extra cost to contractor for fittings |
| 133 | S&F in reapired Vitreous china wash hand basin,CORUS s snow white , size 550x450x110 mm incl all fittings, cutting for and pinning in ends or erecting stand with2Nos Angle cock with wall flange and one single lever basin mixer with 450mm braided connection pipe and bottle trap (228mm) complete all as specified and diected by Engr-in-charge. Cera corus Cat no S2020161,Cat no .F1021451,Cat no F1099201,F8060301 |
| 134 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender