Tender For E-Tender For Repair To Plaster In Patches, Wall Painting, Providing And Laying Brick Work, Vitrified Tiles, Wash Basin, Sanitary Fitting Etc. In First Floor Rooms Of Divisional Office Under Resident Engineer, Giri Power House Division, Hps
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
9710
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirmaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E-Tender For Repair To Plaster In Patches, Wall Painting, Providing And Laying Brick Work, Vitrified Tiles, Wash Basin, Sanitary Fitting Etc. In First Floor Rooms Of Divisional Office Under Resident Engineer, Giri Power House Division, Hpsebl, Giri Nagar.
BOQ
| Sl. No. | Item Description |
| 1 | 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 200 metres lead as per direction of Engineer-in-charge. |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 200metres lead of area 3 sq. metres and below (I.No.15.12 + 15.12.1) |
| 3 | Moving all old files, almirahs, battery, table,chair, etc.from the room and shifting them to another store room & place the file, almirah, etc. back in the office after the work is done, cleaning after shifting of goods complete in all respects as per the direction of Engineer-in-Charge |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand) (I. No. 6.4 + 6.4.2) |
| 5 | 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level:6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) |
| 6 | Damp proof painting two or more coats on concrete/brick wall surface including cleaning /washing of surface & filling of cracks on concrete surface/ brick wall with crack seal etc. complete in all respects (make Asian paint/Dr. Fixit/Sika) |
| 7 | 13.2.1 15 mm cement plaster on the rough side of single or half brick wall of mix: Cement mortar 1:4 (1 cement :4 fine sand) |
| 8 | 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 150mm dia |
| 9 | Providing and fixing on wall face unplasticised Rigid PVC water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 110mm |
| 10 | Providing and fixing on wall face unplasticised Rigid PVC water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 75mm |
| 11 | Providing & laying 110mm Φ PVC door tee ISI mark Type-B including jointing with seal ring complete fitting |
| 12 | Providing & laying 75mm PVC door bend ISI mark Type-B including jointing with seal ring complete fitting |
| 13 | Providing and fixing Heavy Duty Stainless Steel Window/Door Curtain Rods/Pipes for Home and Office Grade-304 (Pipe Only) 25 mm dia (heavy type) |
| 14 | Providing and fixing Curtain in office room as per the direction of Engineer-in-Charge |
| 15 | Providing and fixing Stainless Steel Curtain Rod Finials/end cap both ends of curtain rod in Office rooms complete in all respect |
| 16 | 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo conforming to IS IS:3564, embossed on the body, door weight upto 36kg to 80kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. (make Godrej) |
| 17 | Providing and fixing glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete in all respects (FORTUNE Multipurpose Wall Hung Transparent Glass Shelf for Bathroom 12 x 6 - Inch) |
| 18 | 18.12 Providing and fixing 20 mm G.I. pipes (Class-B make Jindal) complete with G.I. fittings including trenching and refilling etc. |
| 19 | 18.47 Providing and fixing G.I. Union in G.I. pipe( Class-B make Unik) including cutting and threading the pipe and making long screws etc. complete (New work): G.I. Union 20mm nominal bore |
| 20 | 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work -20 mm nominal outer dia pipes (make FINOLEX CPVC PIPE, SDR 11 ) |
| 21 | 18.53 Providing and fixing C.P. angle valve (make Cera) for basin mixer and geyser points of approved quality: 15mm nominal bore |
| 22 | Providing and fixing C.P. 2-Way angle cock with wall flange (Cat. No. F2002211 2 make Cera) for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm nominal bore |
| 23 | 18.56 Providing and fixing C.P pillar cock (Cat. No. F1015101 make Cera) Pillar cock with aerator of approved quality and colour: 15 mm nominal bore |
| 24 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.(make Cera Meridien 600 mm Stainless Steel Towel Rail) |
| 25 | 17.32.2 Providing and fixing mirror of superior glass (of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including steel self: Rectangular shape 453x357 mm |
| 26 | 18.21.2 Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length 15mm nominal bore |
| 27 | 18.49.1 Providing and fixing C.P. bib cock of approved quality conforming to IS:8931: 15mm nominal bore (make Cera Cat. No. F1015151 Stainless Steel Bib Cock with Wall Flange and Aerator, Silver, Polished Finish) |
| 28 | 17.78 Providing and fixing white vitreous china extended wall mounting water closet of Cera make CURTIS 620 x 360 x 710 mm Cat. No. S1031111 P Trap Cat. No. B1020105 Twin flush plastic cistern , Cat. No. B1510124 Carina seat cover, including fittings, nuts, bolts and gasket etc. complete (Cera make) |
| 29 | Providing and fixing Health Faucet ABS body with 1 metre PVC Silver foil connection pipe of quality and make as approved by Engineer- in-Charge (F8030104AB Cera make) |
| 30 | 17.16.A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge |
| 31 | 17.7.1 Providing and fixing wash basin with C.I. brackets,taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin cadle without pedestal size 515 x 410 x 195 mm(Cat. No. S2040121 make Cera) |
| 32 | 17.70.2 Providing and fixing S.S. Bottle Trap for Wash basin and sink 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms (Cera Bottle Traps, Stainless Steel) |
| 33 | Providing and laying Phinolex or equivalent PVC floor trap ISI marked for soil waste and Ventilating pipe and fixing of joints with approved adhesive i/c cutting holes in wall and making th same as per specification complete in all respect. |
| 34 | 18.58.1.1 Providing and fixing S.S- 304 grating of approved quality and colour. |
| 35 | 10.15 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)( make Apollo) |
| 36 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete - Fixed to steel windows by welding (I.No.9.48 + 9.48.1) |
| 37 | Refitting of dismantled doors after minor reparing inculiding screw etc. |
| 38 | 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, 11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, inaverage 6mm thickness including grouting the joints with white cement and matching pigments etc., complete - Size of Tile 600x600 mm (make Kajaria double charged code PRM K-6351 G) |
| 39 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (I.No.8.31)(make Kajaria Digital 30x45cm Italian marble light) |
| 40 | 9.9.2.2 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws - Kiln seasoned and chemically treated hollock wood 30mm thick |
| 41 | 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21.1 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws( make CenturyPly ) |
| 42 | Providing and fixing aluminium work for doors, windows, board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer- in-Charge - 12mm thick Pre-laminated particle board with decorative lamination on both sides (I.No.21.2 + 21.2.2) |
| 43 | 9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete( make Godrej ) |
| 44 | Providing and fixing wire gauge shutters using S.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters - with ISI marked M.S. pressed butt hinges bright finished of required size - Second class teak wood (I.No.9.27 + 9.27.1 + 9.27.1.1 + 9.27.1.1.1) |
| 45 | Providing and fixing fly proof S.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete - With 2nd class teak wood beading 62x19 mm (I.No.9.51 + 9.51.1) |
| 46 | Providing and fixing ISI marked S.S.-304 Sliding door bolts with nuts and screws etc. complete : 250 x 16 mm (I.No.9.62 + 9.62.2) |
| 47 | Providing and fixing ISI marked S.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (I.No.9.63)150x10 mm (I.No.9.63.3) |
| 48 | Providing and fixing ISI marked S.S.tower bolt black finish, (Barrel type) with necessary screws etc. complete : (I.No.9.63) 100mm |
| 49 | 9.165 Providing and fixing bright /matt finished Stainless Steel handles of approvedquality & make with necessary screws etc all complete: 125mm |
| 50 | 9.165 Providing and fixing bright /matt finished Stainless Steel handles of approvedquality & make with necessary screws etc all complete: 100mm |
| 51 | 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m:2.8.1 All kinds of soil |
| 52 | 4.1.11 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) |
| 53 | 5.22.A.1 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete: Mild steel and Medium Tensile steel bars grade Fe 500D |
| 54 | 4.1 Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 55 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all comp with cement mortar 1:4 (1cement: 4 coarse sand) (I.No.14.1+14.1.2) |
| 56 | 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 57 | 13.26 Providing and applying plaster of paris/ putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete(Birla White Wall Care Putty) |
| 58 | 13.83.3 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content, with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre (make Asian Paints) |
| 59 | 13.82.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, i/c like by scrapping, sand papering and preparing the surface smooth: Two coats (Asian Paints colour code L126) |
| 60 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (I.No.13.99 + 13.99.1)(Asian Paints) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender