Tender For Annual Repair And Maintenance Of Distt. Ayurvedic Hospital Panchkarma Department At Distt. Mandi, H.P. (Sub Head:- Providing Half Brick Work, Tile And Cupboard Work Etcetera.) (Deposit Work)
Tender Value
1.48 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
3000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Repair And Maintenance Of Distt. Ayurvedic Hospital Panchkarma Department At Distt. Mandi, H.P. (Sub Head:- Providing Half Brick Work, Tile And Cupboard Work Etcetera.) (Deposit Work)
BOQ
| Sl. No. | Item Description |
| 1 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in cement mortar 1:4 ( one cement : four sand) complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction of Engineer-in-Charge. |
| 2 | Providing centering and shuttering including strutting,propping etcetera and removal of form for suspended floors, roofs, landings, balconies and platform complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 3 | Providing and laying in position reinforced cement concrete 1:2:4 (one cement: two coarse sand :four graded, crushed stone aggregate 20mm (twenty millimetre) nominal size ) including curing complete excluding the cost of centering, shuttering, in all works up to all floor level complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 4 | Steel reinforcement mild steel and medium tensile steel bars for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 5 | 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:4 (one cement: four coarse sand) complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 6 | Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite stone for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera at all levels complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 7 | Providing and fixing 1st(first) quality ceramic glazed floor tiles 300X300mm (three hundred into three hundred millimetre) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size in skirting, risers of steps and dados over 12 mm (twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (at the rate of three point three kilogram per squaremetre) including pointing in white cement mixed with pigment of matching shade complete and as per the entire direction and satisfaction of Engineer-in-Charge. |
| 8 | Providing and fixing 18mm (eighteen millimetre) thick HDMR both side prelaminated board in Shutter/shelves/cup board with butt joints and fixing with nails and screws etecetera complete with all accessories including carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 9 | Providing M.S. Piano hinges having overall width 35mm (thirty five millimetre) ISI marked IS :3818 finished with nickel plating and fixing with necessary screws etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 10 | Providing and fixing 150mm (one hundred fifty millimetre) fency handle of superior quality with necessary screws etcetera complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 11 | Providing and fixing 1.00mm (one point zero millimetre) thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 12 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink with drain board having size 510x1040 mm (five hundred ten into one thousand forty millimetre) bowl depth 250 mm (two hundred fifty millimetre) as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 13 | Providing and fixing 15mm(fifteen millimetre) nominal bore C.P. brass bib cock of approved quality confirming to IS 8931 complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 14 | Providing and fixing 15 mm (fifteen millimetre) nominal outer dia chlorinated polyvinyl chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m (one metre) spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. . |
| 15 | Providing and fixing 75mm (seventy five millimetre) diametre single socketed unplasticised Rigid PVC rain water pipes on wall face conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 16 | Providing and fixing 110mmx90mm (one hundred ten millimetre into ninety millimetre) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetera complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 17 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 18 | Single tee without door 75x75x75mm (Seventy five into Seventy five into Seventy five millimetre) |
| 19 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 20 | Bend 87.5° (eighty seven point five degree)75mm (Seventy five millimetre) bend Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender