Tender For Repairing Of 1 No. Loop Drum Pcc No-115(Shell Dia 800 Mm X 1400 Mm Long, Shaft Dia. 140 Mm At Bearing End)Of 1200Mm 2Nd Belt Conveyor, Pcc-116(Shell Dia 215X1600Mm Long, Shaft Dia 80Mm) Of 1400Mm 1St Belt Conveyor, Pcc-117(Shell Dia 215X1400Mm
Tender Value
2.49 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
3200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairing Of 1 No. Loop Drum Pcc No-115(Shell Dia 800 Mm X 1400 Mm Long, Shaft Dia. 140 Mm At Bearing End)Of 1200Mm 2Nd Belt Conveyor, Pcc-116(Shell Dia 215X1600Mm Long, Shaft Dia 80Mm) Of 1400Mm 1St Belt Conveyor, Pcc-117(Shell Dia 215X1400Mm Long,
BOQ
| Sl. No. | Item Description |
| 1 | PART A PCC-115 |
| 2 | Making of new Shell: Cost of raw material of 20 mm thick M.S. plate Rough weight: dia 800 mm x 1400 mm long |
| 3 | Cost of M.S. Plate Bending (as mentioned in sl. no. 1) |
| 4 | Cost of welding rod of ESAB make Duroid 250(4 mm) 5 packets x @ Rs 1200 |
| 5 | Cost of DA & oxygen |
| 6 | Cost of welding of above mentioned M.S. Plate |
| 7 | Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size |
| 8 | Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 800 mm dia X 18 mm thick plate including 10% as machining allowance |
| 9 | Cost of plate welding (flange both side) by groove cutting |
| 10 | Cost of machining and rectification of 02 nos. boss after removing old side plates |
| 11 | Labour cost for dismantling, welding, gas cutting, preheating, grinding machininng 02 nos new keyway making through slot cutting in both side boss and again assembling complete drum |
| 12 | Cost of checking Static Balancing of the drum and making it proper after necessary fabrication |
| 13 | Cost of painting of complete drum by oil paint for making of rust proof |
| 14 | PART B PCC-116 |
| 15 | Making of new Shell: Cost of raw material of 12 mm thick M.S. plate Rough weight: 215 mm x 1600 mm long including 10 % as cutting and maching allowances |
| 16 | Cost of M.S. Plate Bending (as mentioned in sl. no. 1) |
| 17 | Cost of welding of above mentioned M.S. Plate |
| 18 | Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size |
| 19 | Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 215 mm dia X 16 mm thick plate including 10 % as cutting and maching allowances |
| 20 | Cost of plate welding (flange both side) with the new shell |
| 21 | Cost of machining and rectification of 02 nos. boss after removing old side plates |
| 22 | Making of new Stiffeners: Cost of making 08 nos. new stiffeners of size 160mm X 120mm X 16mm by raw material M.S. Plates including 10 % as cutting and maching allowances |
| 23 | Cost of fitting of complete drum set including side plates, boss along with 08 nos. stiffeners |
| 24 | Cost of checking Static Balancing of the drum and making it proper after necessary fabrication |
| 25 | Cost of painting of complete drum by oil paint |
| 26 | PART C PCC-117 |
| 27 | Cost of DA & oxygen for preheating |
| 28 | Cost of Dismantling Charges |
| 29 | Making of new Shell: Cost of raw material of 12 mm thick M.S. plate Rough weight: dia 215 mm x 1600 mm long |
| 30 | Cost of M.S. Plate Bending (as mentioned in sl. no. 1) |
| 31 | Cost of welding of above mentioned M.S. Plate |
| 32 | Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size |
| 33 | Cost of fitting of complete drum set including side plates, boss |
| 34 | Cost of checking Static Balancing of the drum and making it proper after necessary fabrication |
| 35 | Cost of painting of complete drum by oil paint for making of rust proof |
| 36 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender