Tender For Construction Of Compound Wall And Maintenance Of Ward No.12 Doors, Toilet Door And Front Side Shed Plastering Arrangements At Parasery Anganwadi Centre In Villukuri Town Panchayat.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Compound Wall And Maintenance Of Ward No.12 Doors, Toilet Door And Front Side Shed Plastering Arrangements At Parasery Anganwadi Centre In Villukuri Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc complete. (Narrow Foundation - First Depth upto 2 metre) |
| 2 | Cement Concrete 1:4:8 (One cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers - Mixing by Mechanical Means |
| 3 | Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 40mm size hard broken stone jelly excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete and as directed by the departmental officers. - Mixing by mechanical means |
| 4 | Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. |
| 5 | Supplying, fabricating and placing in position Mild Steel/Ribbed T or Steel reinforcement grills of all variety like HYSD/CTD/TMT and all grade like Fe500, Fe550D, Fe500D etc for all RCC works as per design given including cost of steel reinforcement and GI binding wire, wastage etc complete complying with standard specification and as directed by the departmental officers. (Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) |
| 6 | Reinforced Cement Concrete 1:1½:3 (One Cement, One and half crushed stone sand and three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including Super Plasticiser, mixing charges for machine mix,laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers - machine mix |
| 7 | Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 8¾“x4¼”x2¼” with class designation of 10 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally other type of bond shall be done as directed by the Executive Engineer in charge. |
| 8 | Plastering the surface of walls with Cement Mortar 1:4 (One cement and Four plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 9 | Supplying and fixing mild steel gate using MS flats and rounds as directed by the departmental officers inclusive of cost of MS grill including one of red oxide and fixing in position etc. complete (as per the schedule of rate) |
| 10 | Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification. |
| 11 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complete complying with standard specification. (The make, quality and colour of paint should be got approved by the departmental officers before use on works.) |
| 12 | Supplying and fixing in position of vertical column arrangements with 80 mm Ø size GI pipe and base plate of size 30 x 30 x 10 mm and bed plate of size 30 x 30 x 12 mm and with support of 50 x 50 x 6 mm size angle are provided at base and bed plates to GI pies and drilling holes in the MS angles if necessary to accommodate the bolts, including one coat of red oxide primer etc. complete complying with standard specification and as directed by the departmental officers. |
| 13 | Supplying, fabricating, erecting structural steel trusses work for roofing welded or bolted type using necessary mild steel rectangle and square box sections etc each according to given design conforming to IS specification. It includes cutting, welding, conveyance of all materials to work site, primer coating and enamel painting and approved by the departmental officers etc complete as per standard specification. |
| 14 | Supplying and fixing Fibre Reinforced Plastic (FRP) sheet with approved quality by drilling holes (and not by punching) with necessary J/U bolts and nuts of 8 mm Ø of suitable length and providing one set of bitumen washers of 25 mm Ø and 1.60 mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc complete complying with standard specification and as directed. |
| 15 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 16 | Paving floor with colour ceramic tiles of size 200 x 200 x 6 mm in all floors over the base layer of cement mortar 1:3 (one part of cement three part of sand) 20 mm thick pointed with white cement at 0.40 kg/m2 including finishing the joints etc complete, as directed by the departmental officers (The rate should be exclusive of cost of flooring concrete 1:5) special |
| 17 | Solid PVC door shutters using 19 gauge 19 mm MS square tubes for styles and outer frames. 15 mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5 mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. |
| 18 | Supplying and fixing of steel doors with suitable design including cost of materials, welding and conveyance of all materials to site locking arrangements and painting one coat of primer etc complete as per standard specification including fixing charges etc. complete for the work. |
| 19 | Special design art work with first class quality enamel paint including wall putty, priming coat etc complete and all other incidential charges if any as per standard specification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender