Tender For Retrofitting Work For Existing Building In Keel Chinnagound Atty At Ward No.26 In Tharamangalam Municipality
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
2500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Retrofitting Work For Existing Building In Keel Chinnagound Atty At Ward No.26 In Tharamangalam Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Painting the walls with Two Coats weather Proof Exteriour Emulsion based emulsion Paint over one coat of primer as instructed by the departmrntal officers including Preparation of surface curing, etc complete in all floorscomplying with standard specification. ( The Colour and shade of the paint shall be got approved by the departmental officers.) |
| 2 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 3 | Supplying and fixing in position of Iron grills of required size using 32 x 32 x 6mm angle around and 2 Nos of vertical at center with b flats diagonally to the existing open space for grills into necessary hold fast conveyance and one coat of primer etc., complete for Windows and others. |
| 4 | Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc, in all floor with two coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with Standard Specification. ( The Make, Quality and colour of paint should be got approved by the engineer in charge before use on works ) ( TNSS NO or NBC No 61 V VI (54) 3) |
| 5 | Supplying and Fixing in position best approved of BIS quality 110mm P.V.C Rain Water down fall pipe having a pressure of 4Kg / Sq.cm including cost of necessary PVC shoe,PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc, and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc, complete. The rate shall be inclusive of cast of removable cast iron grating. The PVc pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.00mt pipe length etc, Complete Complying with Standard Specifications. |
| 6 | Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC Unsheathed Cu. Conductor of 1100V grade in cuitable PVC rigid pipe concealed in wall and Ceiling with PVC accessoires in flush with wall with 3mm thick with TW Switch box and 5A F.T. Switch Inflush with wall coverd hylam sheet of 3mm thick with paiting of suitable colour for open P.V.C Light point / Fan Point (for Electronics Regulator) (SD NO: 21) |
| 7 | Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and Ceiling with PVC accessoires in Flush with wall 150mm x 100mm x 113mm TW Switch box with 3mm thick Hylum sheet cover for 5A 3 pin non inter locking CS Plug with continuous earth wire connection of 14SWG TC wire and making good of the Concealed portion with suitable colour for CONCEALED PVC PLUG POINT (SD NO: 36) |
| 8 | Wiring with 2x4sq.mm .PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade insuitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accssories inflush with wall with 150mmx100mmx75mm MS switchbox concealed type with 3mmthick hylum shee cover for 15A3 pin flushtype noninterlocking Splug with continuous earthwire connection of 4sq.mm copperwire and rnaking good of th concealed portion for concealed power plug point SD 14 |
| 9 | Supply and fixing of 18 W 4 feet LED Fitting with LED Single side (Electrical data 15 - A) with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting |
| 10 | Supply and fixing of 48W LED Outdoor street light fitting (Philips/Havells) complete. |
| 11 | Supplying, laying and jointing G.I. Pipes of approved quality and best variety of \\"B\\" class pipe of the following dia including labour fixing G.I. Specials, including charges for cutting and threading of pipes, cost of such specials with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., 20mm Dia Tap |
| 12 | 110mm dia PVC Pipe |
| 13 | 110mm dia PVC Tee |
| 14 | 110mm Dia PVC Elbow |
| 15 | 1000 Litre HDPE Tank |
| 16 | 40mm Dia PVC Pipe |
| 17 | 40mm Dia PVC Elbow |
| 18 | 40mm Dia PVC Tee |
| 19 | 40mm Dia PVC Coupler |
| 20 | 40*25mm Dia PVC Reducer |
| 21 | 25mm Dia PVC Pipe |
| 22 | 25mm Dia PVc Elbow |
| 23 | 25mm Dia PVC Tee |
| 24 | 25mm Dia PVC Coupler |
| 25 | Supply and fixing of 32mm dia GM Gate Valve with ISI make, the cost shall including materials, fixing and labour charges etc,complete as per standard specification. SD |
| 26 | Supply of 32 Amps TPN Metal clad switch with rewirable fuse units |
| 27 | Supply of 32 Amps Porcelain fuse unit (500 V) |
| 28 | Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD-65) |
| 29 | Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work SD 212 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender