Tender For Provision Of Certain Revenue Works At Air Force Station Arjan Singh Under Ge (Af) Panagarh
Tender Value
18.95 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
20 days left
EMD
38000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain Revenue Works At Air Force Station Arjan Singh Under Ge (Af) Panagarh
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for foundation etc. or for shafts, wells, cesspits, manholes, pier hols etc. n. exc 10sqm on plan and getting out in any type of soil complete all as specified and as directed |
| 2 | Returning, filling in trenches of any type of soil including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed |
| 3 | Removing of excavated soil exceeding 250 m but not exceeding 500m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed. |
| 4 | M&L for PCC (1:3:6), type C-2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed. |
| 5 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | M&L for formwork for rough finished concrete surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed. |
| 7 | M&L for formwork for rough finished concrete surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 8 | M&L for reinforced cement concrete M-30 (design mix) (using 20 mm crushed stone aggregates) as in foundations including rafts, footings, foundation beams, plinth beams, bases for asement slabs,under-reamed piles and mass concrete complete all as specified and directed.(Note:- Reinforcement and form work shall be measured and paid on separate item.) |
| 9 | M&L for reinforced cement concrete M-30 (design mix) (using 20 mm crushed stone aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed.(Note:- Reinforcement and form work shall be measured and paid on separate item.) |
| 10 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | MM&L for mild steel TMT bars 5mm to 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 12 | M&L for Fe-410-W(Gde-E-250) quality - B, rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with bolts embedded in reinforcement of complete all as specified and as directed. |
| 13 | S&F for pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions complete all as specified and directed. |
| 14 | S&F for pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of approved colour having tensile strength 550 Mpa as in roof covering, eaves board ,ridge, hips, valley gutters, drip and straight flashing cladding ti wall etc.l fixed with self tapping screws including side and end lap as per manufacturer’s instructions complete all as specified and directed. |
| 15 | M&L for steel works as in Joist (ISMB), channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed. |
| 16 | M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
| 17 | M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender