Tender For special Repair To Bldg No T- 243B (Bathroom) And T-250B (Toilet And Urinal Pt) At Certain Mil Unit In Hasimara Mil Stn Under Ge (S) Binnaguri
Tender Value
20.66 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
41500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T- 243B (Bathroom) And T-250B (Toilet And Urinal Pt) At Certain Mil Unit In Hasimara Mil Stn Under Ge (S) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified |
| 3 | Dismantling of wall and ceiling Boards(Fiber,pulp, Insulation etc) or insulation Board/slab/blankets any Thinkness including cover fillets complete all as specified |
| 4 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified |
| 5 | M&L for glazed coloured ceramic tiles (450x350x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 10mm thick rendering in CM(1:4) all as specified |
| 6 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified |
| 7 | Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000 ltrs. |
| 8 | S & F 1000 ltrs LLDPE double layer water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified |
| 9 | S&F in repair 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. |
| 10 | Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site |
| 11 | Taking up or down GI 20mm steel tubing and connections incl cleaning for refixing or removal to store. |
| 12 | S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified |
| 13 | S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified |
| 14 | S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete all as Specified. |
| 15 | S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 4mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as Specified. |
| 16 | S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified |
| 17 | S&F aluminium handles 125 mm size cast type anodised complete all as Specified. |
| 18 | S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified |
| 19 | S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 20 | M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified |
| 21 | M&L fly ash Brick work using modular size bricks with sub class 'B' bricks curved on plan with mean radius not exc 6m with bricks roughly cut to radius or bricks with wedge shaped joints built in cement mortar 1:6 complete all as specified |
| 22 | Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified |
| 23 | M&L for 20 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 10mm) mixed with water proofing compound in top layer 200 ml per beg of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified . (Note: Water proofing compound shall be measured and paid seperately under relevant item of schedule 'A'). |
| 24 | Supply only Liquid water proofing compound all as specified |
| 25 | M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified |
| 26 | M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement. |
| 27 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying 2 coats of cement based wall putty 1 mm each to wall surface complete all as specified |
| 28 | M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified |
| 29 | M & L for preparing new Plastered surfaces of walls and finishing the walls with Acrylic smooth exterior paint of required shade : New work (Two coats over and including priming coat of exterior primer). |
| 30 | S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , including chain & plug & porcelain stopper ,brackets, cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified |
| 31 | S&F in repairs 15 mm fancy type swan neck pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore. |
| 32 | S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality, mounted on 6 mm thick AC plain building board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers all complete as specified |
| 33 | S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specifed |
| 34 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including complete |
| 35 | S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device |
| 36 | S&F in repairs Bib taps long body fancy type Brass, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified |
| 37 | S&F in repairs stop valves fancy type Brass, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified |
| 38 | S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified |
| 39 | S & F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified |
| 40 | S&F in repair 15 mm bore two way bip taps CP with flage complete all as specified |
| 41 | S&F in repair 15 mm bore angle cock CP with flage complete all as specified |
| 42 | S&F in repair CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook in cluding making connections and fixed in position complete in all respect and specified |
| 43 | S&F in repair for brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 44 | S & F in repairs Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm embeded in the wall all as specified |
| 45 | S&F in repair swivel shower of CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified |
| 46 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard and railing 60 cm long. |
| 47 | S& F in repair for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified |
| 48 | Taking down eaves gutter ,rain water pipes ,CI/PVC/AC soil pipe with fittings from wall, treches of any description including fittings. |
| 49 | S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 50 | S&F 110mm dia PVC bends of any radius acess door. |
| 51 | S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door. |
| 52 | S&F 110mm dia PVC SWR vent cowl |
| 53 | S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 54 | S & F 75 mm bore PVC (SWR) bends of any radius. |
| 55 | S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 56 | S&F 75 mm butt hinges of mild ,medium weigh steel complete all as specified |
| 57 | M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified |
| 58 | M&L for cement concrete type C-2 1:3:6, 40mm graded aggregate as in surface channel. |
| 59 | M&L for 25 mm thick PCC (1:2:4) type B0 ( 12.50 mm graded stone aggregate) , as in under layer levelling course for Bath,WC floor below tiles finished even and rough complete all as specified. |
| 60 | Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc |
| 61 | M&L for chequered cement concrete tiles 20 cm x 20 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 15 mm thick screed bed in cement mortor 1:6 complete all as specified |
| 62 | M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering , eaves boards, velly gutter, and other similar works fixed with self tapping screws/J hooks complete all as specified |
| 63 | S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified |
| 64 | Supply and fixing aluminium anodised snap grid false ceiling to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides including hanging proper hanging arrangement with 4 mm dia anodized galvanised iron wire and adjuster complete as specified. |
| 65 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified. |
| 66 | M&L for Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws ,4mm thick designer board (610mm x 610mm ) size complete all as specified |
| 67 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified |
| 68 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) Please Enable Macros to View BoQ information |
| 69 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender